2GodBDGlory Posted May 6 Posted May 6 4 hours ago, Stereo said: Actually they have a central clutch pack that's electronically controlled, so more like a transfer case than a differential. The rear is always directly driven by the transmission. Oh ok! So the clutch automatically connects and disconnects the front axle as necessary? Kind of the opposite of the Lego set then, I guess! Quote
Timorzelorzworz Posted May 7 Posted May 7 (edited) After a deep closer look to the model and the partial inventory, I would bet to 90% that this model is a Milan Reindl design. The great parts usage mixed with the many system parts reminds alot to the 42177 design (and also 42110). Edited May 7 by Timorzelorzworz Quote
Oh_Hi_Mao Posted May 8 Posted May 8 9 hours ago, Timorzelorzworz said: After a deep closer look to the model and the partial inventory, I would bet to 90% that this model is a Milan Reindl design. The great parts usage mixed with the many system parts reminds alot to the 42177 design (and also 42110). It is not Milan's set, he said that on Instagram. The only set from Milan this year is RB F-1. But he also stated, that he "helped here and there" on some of the summer wave sets. Quote
thekoRngear Posted May 8 Posted May 8 (edited) 3 hours ago, Oh_Hi_Mao said: It is not Milan's set, he said that on Instagram. The only set from Milan this year is RB F-1. But he also stated, that he "helped here and there" on some of the summer wave sets. 13 hours ago, Timorzelorzworz said: After a deep closer look to the model and the partial inventory, I would bet to 90% that this model is a Milan Reindl design. The great parts usage mixed with the many system parts reminds alot to the 42177 design (and also 42110). From these two quotes, I can successfully conclude that it defo has nice touches from Milan Reindl But who actually designed this beauty? Hope to know it soon! Edited May 8 by thekoRngear Quote
thekoRngear Posted May 15 Posted May 15 Since the release date is June 1st I guess the reviews are not that far away for this beauty Quote
Auroralampinen Posted May 15 Posted May 15 1 minute ago, thekoRngear said: Since the release date is June 1st I guess the reviews are not that far away for this beauty Same with the 42209 and 42208. Wich are also june sets:). Quote
thekoRngear Posted May 15 Posted May 15 (edited) 4 minutes ago, Auroralampinen said: Same with the 42209 and 42208. Wich are also june sets:). Be sure to drop the links as soon as they out you night owl! Edited May 15 by thekoRngear Quote
SNIPE Posted May 18 Posted May 18 (edited) Someone already started a live build of this set: I predict that the new 4L double sided CV joint is in black hey I was right 😄 I also predict that we get these plastic balls in black, the same part that came in the Liebherr LR1300 crane hey I was right again! Edited May 18 by SNIPE Quote
Auroralampinen Posted May 18 Posted May 18 Ok, cool this set has those ford gt cv joints in black:). Quote
1gor Posted May 18 Posted May 18 (edited) Looks indeed like black CV joints axle 4l....and 4L links with ball joint at the end Edited May 18 by 1gor Quote
Aurorasaurus Posted May 18 Posted May 18 Has anyone got any ideas where I can find the instructions for this set? Or do we just have to wait for it to be on Lego's site. Quote
M_longer Posted May 18 Posted May 18 It looks like rear wheels are going to spin faster in air when drift mode is engaged? Quote
Aurorasaurus Posted May 18 Posted May 18 10 minutes ago, M_longer said: It looks like rear wheels are going to spin faster in air when drift mode is engaged? Yep. And be disconnected otherwise I think. Quote
Ngoc Nguyen Posted May 18 Author Posted May 18 (edited) 12 minutes ago, M_longer said: It looks like rear wheels are going to spin faster in air when drift mode is engaged? Indeed, the drive train from the front axle goes through 2 pairs of 20/12 meshing to reach the rear axle. Edited May 18 by Ngoc Nguyen Quote
SNIPE Posted May 18 Posted May 18 (edited) biscuit joints in blue found (I'll stop with the "I predicted it" jokes now :P) I also tried again (since a few weeks ago) to convert the brickset .CSV file so that stubborn dimwitted rebrickable understands it but it just complains and removed parts, and then you'll probably use a parts list not a custom list, and so it won't tell you if you have the parts or not, or enough of them. I was contemplating building a replica of this set, but the fact I only have 1 of the spike prime castor beams and no ball parts that fit into it, plus rebrickable's shenanigans made me change my mind. Edited May 18 by SNIPE Quote
Auroralampinen Posted May 18 Posted May 18 5 minutes ago, SNIPE said: biscuit joints in blue found (I'll stop with the "I predicted it" jokes now :P) Well, cool, if you want to build mini 42042. Now its your chance:). Quote
Divitis Posted May 18 Posted May 18 2 hours ago, SNIPE said: new 4L double sided CV joint Which part is this? I think I missed its reveal Quote
Auroralampinen Posted May 18 Posted May 18 Breaking news, the nissan has an shorter links for steering:). Well, this is amazing news for moc builders:). Those new links seems to be 4 studs long:). Quote
Cardboy Posted May 18 Posted May 18 (edited) With all the new suspension parts this year, a multi link suspension might be possible and compact. Wish they would make some super hard mini shocks Edited May 18 by Cardboy Quote
Zerobricks Posted May 18 Posted May 18 4 minutes ago, Cardboy said: With all the new suspension parts this year, a multi link suspension might be possible and compact. Wish they would make some super hard mini shocks Was just talking about that with a friend. Would love to see a 3,5 long shock with 0,5 stud of movement or such. But I' also really happy with the the suspension and driveline components we got in the last 2 years, building robust models has never been easier. Quote
mahjqa Posted May 19 Posted May 19 0,5 stud travel for a shock gets awfully close to the flex that's already inherent in studless technic. Quote
Auroralampinen Posted May 19 Posted May 19 (edited) Ok, this looks painfull. You have to alling perfectly the three stickers(on those plates). If the nasa 747 gets prints for same window patterns. WHY this can't have same treatment, because this is also 18+:/ Edited May 19 by Auroralampinen Quote
msk6003 Posted May 19 Posted May 19 25 minutes ago, Auroralampinen said: Ok, this looks painfull. You have to alling perfectly the three stickers(on those plates). If the nasa 747 gets prints for same window patterns. WHY this can't have same treatment, because this is also 18+:/ Becasue all of those decal is different. 747 get 6 types of print and one of it has 22 in that set. This set need literally 38 type of printed piece which need just only one piece per type. Quote
Jockos Posted May 19 Posted May 19 26 minutes ago, Auroralampinen said: Ok, this looks painfull. You have to alling perfectly the three stickers(on those plates). If the nasa 747 gets prints for same window patterns. WHY this can't have same treatment, because this is also 18+:/ Well, partly because they are different patterns, partly because this is just a "simple" surface and it's not an expensive set :( Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.