Holodoc Posted October 29, 2012 Posted October 29, 2012 (edited) 850486 Rock Band - Theme: (other) lxf-file Errors: Wrong face, torso and leg prints Edited October 29, 2012 by Calabar Added theme informations Quote
marco9999 Posted October 29, 2012 Posted October 29, 2012 (edited) 7645 - MT61 Crystal Reaper - Theme: Space - Subtheme: Mars Mission lxf Updated to LDD 4.3.6. Parts missing: 61185c01: replaced with custom brick 61680 replaced with 63965 57702 replaced with 92208 Martian figures' parts missing: 62723 62724 58845 and 58844 (available in some LDD old version) fixed in the file Parts were replaced with custom bricks and "Life on Mars" figures' parts. Track is not perfectly closed. Edited March 9, 2013 by marco9999 Quote
Gnac Posted October 30, 2012 Posted October 30, 2012 Super work on the index updates as usual, Mister Calabar! I know I have been responsible for a large part of the workload recently, but I'm afraid there's more. I just can't stop! ---------------------------------------------------------------------------------------------------- 4883 - Gear Grinders [Model A] - theme: Designer LXF (LDD 4.3) 4883 - Gear Grinders [Model B] - theme: Designer LXF (LDD 4.3) 4883 - Gear Grinders [Model C] - theme: Designer LXF (LDD 4.3) 4883 - Gear Grinders [Model D] - theme: Designer LXF (LDD 4.3) 4883 - Gear Grinders [Model E] - theme: Designer LXF (LDD 4.3) 4883 - Gear Grinders [Model F] - theme: Designer LXF (LDD 4.3) 4883 - Gear Grinders [Model G] - theme: Designer LXF (LDD 4.3) 4883 - Gear Grinders [Model H] - theme: Designer LXF (LDD 4.3) 4883 - Gear Grinders [Model I] - theme: Designer LXF (LDD 4.3) 4883 - Gear Grinders [Model J] - theme: Designer Note: What the heck IS this thing? LXF (LDD 4.3) 4883 - Gear Grinders [Model K] - theme: Designer LXF (LDD 4.3) 4883 - Gear Grinders [Model L] - theme: Designer Error: Trailer not properly connected due to conflict between parts 4623 (plate 1 x 2 with hook) and 6091 (plate 1 x 2 with fork, vertical end) LXF (LDD 4.3) 4883 - Gear Grinders [Model M] - theme: Designer LXF (LDD 4.3) 4883 - Gear Grinders [Model N] - theme: Designer LXF (LDD 4.3) 4883 - Gear Grinders [Model O] - theme: Designer Error: Trailer cannot connect due to conflict between parts 4623 (plate 1 x 2 with hook) and 6091 (brick with arch 1 x 1 x 1) LXF (LDD 4.3) 4883 - Gear Grinders [Model P] - theme: Designer LXF (LDD 4.3) 4883 - Gear Grinders [Model Q] - theme: Designer LXF (LDD 4.3) Errors on ALL models, because the set has a rare part in it: Part 51377 (Metallic Silver Wheel 18mm D. x 14mm Spoked) not available in LDD, replaced with part 30285 17 variations in this set, whoah. Quote
Stephan Posted October 31, 2012 Posted October 31, 2012 40042 Cat - Theme: Promotional; Monthly Mini Model Build - LXF file [Brickset][Bricklink][Peeron] Errors: No errors. 40047 Owl - Theme: Promotional; Monthly Mini Model Build - LXF file [Brickset][Bricklink][Peeron] Errors: No errors. 40045 Shark - Theme: Promotional; Monthly Mini Model Build - LXF file [Brickset][Bricklink][Peeron] Errors: No errors. 40040 Olympic Flame - Theme: Promotional; Monthly Mini Model Build - LXF file [Brickset][Bricklink][Peeron] Errors: No errors. 40044 Lawnmower - Theme: Promotional; Monthly Mini Model Build - LXF file [Brickset][Bricklink][Peeron] Errors: No errors. 40039 Tulip - Theme: Promotional; Monthly Mini Model Build - LXF file [Brickset][Bricklink][Peeron] Errors: No errors. 40043 Duck - Theme: Promotional; Monthly Mini Model Build - LXF file [Brickset][Bricklink][Peeron] Errors: No errors. 40038 Worm & Earth - Theme: Promotional; Monthly Mini Model Build - LXF file [Brickset][Bricklink][Peeron] Errors: No errors. 40037 Hockey Player - Theme: Promotional; Monthly Mini Model Build - LXF file [Brickset][Bricklink][Peeron] Errors: No errors. Quote
legolijntje Posted October 31, 2012 Posted October 31, 2012 @Stephan; your images aren't working. I don't know what's the poblem, it seems you deeplinked them correctly. Although the folder is still not public, the images should work Any ideas? Quote
Stephan Posted October 31, 2012 Posted October 31, 2012 @legolijntje: I know, I fixed that. This time I decided to upload my post first with all the links and after that upload them to Brickshelf. That's why :) Quote
marco9999 Posted October 31, 2012 Posted October 31, 2012 (edited) 7646 - ETX Alien Infiltrator - Theme: Space - Subtheme: Mars Mission 7646_etx__alien_infiltrator.lxf Updated to LDD 4.3.6. Parts missing: 61185c01: replaced with custom brick 61680 replaced with 63965 Martian figures' parts missing: 62723 62724 58845 and 58844, replaced with custom bricks and "Life on Mars" figures' parts. Fixed in the file. Missing all stickers and some decorations 7647 - MX-41 Switch Fighter - Theme: Space - Subtheme: Mars Mission Open configuration (see picture): o lxf Closed configuration: c lxf Updated to LDD 4.3.6. Martian figures' parts missing: 58845, 58844 and 58843, replaced with custom bricks and "Life on Mars" figures' parts. Tube End 58947 in LDD is slightly different from the part shown in the instructions and in Bricklink's picture, although they refer to the same id#. The LDD part has 6 holes on each side, the Bricklink part has 5. Not a dramatic difference, but it causes a minor incoherence with the original design. Missing all stickers and some decorations Edited March 9, 2013 by marco9999 Quote
Gnac Posted November 1, 2012 Posted November 1, 2012 Sea Machines? Do Machines! ---------------------------------------------------------------------------------------------------- 4505 - Sea Machines [Model A] - theme: Designer LXF (LDD 4.3) 4505 - Sea Machines [Model B] - theme: Designer LXF (LDD 4.3) 4505 - Sea Machines [Model C] - theme: Designer LXF (LDD 4.3) 4505 - Sea Machines [Model D] - theme: Designer LXF (LDD 4.3) 4505 - Sea Machines [Model E] - theme: Designer LXF (LDD 4.3) 4505 - Sea Machines [Model F] - theme: Designer LXF (LDD 4.3) Quote
marco9999 Posted November 1, 2012 Posted November 1, 2012 7015 - Viking Warrior challenges the Fenris Wolf - Theme: Vikings ... Part 32310 won't attach to the wolf in the correct place. It is actually possible to place part 32310 on the back of the wolf if you take advantage of a small gap between the axle and the lever. Remove 4519, 43857, 43093 and 2780 from the back of the wolf, then connect 32310 to 2M levers 41677 by means of a bar, for example 30374. Then set a 1 degree anticlockwise rotation for 32310, remove the bar and all other parts will fit. If it can help here is the fixed file: 7015_fix.lxf Quote
Sjuip Posted November 1, 2012 Posted November 1, 2012 (edited) 7994 - LEGO City Harbour - Theme: City / Harbour [bricklink] [brickset] 7994 LXF Notes: - Ship 72x4x18, Assembled (Design ID 59278) not in LDD (appears only in this set sofar). Replaced by custom build ship's hull. - No strings for crane, anchor and fishing rod - Different minifig body decoration for ship's captain - Truck: Red Technic Brick 1x1 placed aside due to illegal build in truck cabin (supposed to be between two Brick 1x1 with Four Knobs 4733) EDIT: Ship's hull corrected with LDD 4.3.8/1264. Placement of Red Technic Brick 1x1 corrected with LDD 4.3.9/2075 Edited July 4, 2016 by Sjuip Quote
Gnac Posted November 2, 2012 Posted November 2, 2012 (edited) BIG DAMN TRUCK. ---------------------------------------------------------------------------------------------------- 5563 - Racing Truck [Model A] - theme: Model Team Errors: No stickers Possible collision error with 6592 (Toothed Bar 10M) - connector pegs won't fully insert, but still just about connect Steering feature not operational due to LDD limitations Flexible hoses 78c06 (Black Hose, Ribbed 7mm D. 6L) not available in LDD Print for part 3039px6 (Black Slope 45 2 x 2 with 3 Gauges and 3 Knobs Pattern) not available in LDD Bull bars part 71972 (Chrome Silver Vehicle Grille Guard) not available in LDD, replaced with brick-built solution Doors 30073 (White Door 1 x 6 x 8 Left) and 30074 (White Door 1 x 6 x 8 Right) not available in LDD, replaced with brick-built solution (which also mimics the missing stickers) Rim part 32004b (Light Gray Wheel 68.8 x 24 Model Team Type 2) missing in LDD, replaced with part 88652 (Rim 43.2 x 18) Road tyre part 32003 (Black Tire 68.8 x 24) missing in LDD, replaced with part 32019 (Tyre 62.4 x 20) LXF (LDD 4.3) 5563 - Racing Truck [Model B] - theme: Model Team Errors: No stickers Possible collision error with 6592 (Toothed Bar 10M) - connector pegs won't fully insert, but still just about connect Steering feature not operational due to LDD limitations Print for part 3039px6 (Black Slope 45 2 x 2 with 3 Gauges and 3 Knobs Pattern) not available in LDD Part 32062 (Axle 2M with groove) cannot be inserted into 71075* (Tube with knob 1 2/3) - the axle has been left underneath the model Rim part 32004b (Light Gray Wheel 68.8 x 24 Model Team Type 2) missing in LDD, replaced with part 88652 (Rim 43.2 x 18) Road tyre part 32003 (Black Tire 68.8 x 24) missing in LDD, replaced with part 32019 (Tyre 62.4 x 20) LXF (LDD 4.3) * BrickLink and LDD seem to disagree over which parts are referenced by 71705 and 71706 EDIT 20121104: Fixed the issues with the steering system, where the rack could not fully connect to the steering knuckle EDIT 20121105: Fixed link to the A Model. Sorry about that! Edited November 5, 2012 by Gnac Quote
marco9999 Posted November 2, 2012 Posted November 2, 2012 (edited) 7648 - MT-21 Mobile Mining Unit - Theme: Space - Subtheme: Mars Mission lxf Errors: - martian figure non in LDD - round signs 30261 are correctly placed but not connected - a couple of wheels 6118 won't connect to the vehicle. The reason for that is the wrong positioning of brick 6249's pin inside the wheel (it goes too deep inside) so the wheel gets too near to the vehicle and collides with the slope brick. The same bug occurs to any Technic pin connecting to 6118. - Missing all stickers and some decorations. Edited November 2, 2012 by marco9999 Quote
peterski Posted November 3, 2012 Posted November 3, 2012 (edited) 9092 - Crazy Demon - theme: Racers 9092.lxf 9093 - Bone Cruncher - theme: Racers 9093.lxf 9094 - Star Striker - theme: Racers 9094.lxf 9095 - Nitro Predator - theme: Racers 9095.lxf Edited November 3, 2012 by peterski Quote
Calabar Posted November 3, 2012 Author Posted November 3, 2012 @Petersky You have to post every set separately, and with one image for each. Can you edit your post? EDIT: thanks! Quote
PeabodySam Posted November 3, 2012 Posted November 3, 2012 (edited) All the models in this post, with the exception of the last one (6037 Witch's Windship), are alternate models to previously-indexed Adventurers sets. As such, the A Models are not listed. 5925 - Pontoon Plane (B Model: "Adventurer Hovercraft") - Theme: Adventurers / Amazon [bricklink] [brickset] 5925 LXF Notes: - The Adventurer Hovercraft is an inspiration model provided on the back of the instructions for 5925 Pontoon Plane. Instructions for the Adventurer Hovercraft are not included in 5925 Pontoon Plane itself, but have been provided in the January-February 1999 issue of LEGO Mania magazine. - In the inspiration model photo and the final step of the instructions, the two 2412 Radiator Grille 1x2 bricks placed on the red 3022 Plate 2x2 brick are colored black. However, in Step 6 of the instructions, they are colored light gray. For this LXF, the light gray color is used, but either color is possible when using the inventory of 5925 Pontoon Plane. Errors: - Incorrect minifigure decorations - 6069 Wedge 4 x 4 Triple without Stud Notches is not included in LDD and has been substituted with 48933 Roof Tile 4x2/18 W/Cor. - 4859 Wing 3 x 4 with 1 x 2 Cutout without Stud Notches is not included in LDD and has been substituted with 48183 Plate 3x4 W/Angle - 30010 Wall Element 1X2X1 - Tr. has been substituted with 4865 Wall Element 1X2X1 - 30057 Plate 1X1 Round has been substituted with 6141 Plate 1X1 Round 5935 - Island Hopper (B Model) - Theme: Adventurers / Dino Island [bricklink] [brickset] 5935 LXF Errors: - Incorrect minifigure decorations - 4733 Brick 1x1 W. 4 Knobs cannot attach properly to 2458 Brick 1x2 W. Horizontal Snap, as this is most likely an illegal building technique. As such, while the brick is correctly placed on the model using scaffolding, it is not attached to the rest of the model. - 2625 Stem Plate 7X6 is not included in LDD and has been substituted with 50303 Stem Plate 7x6 W/Cor. - 30057 Plate 1X1 Round has been substituted with 6141 Plate 1X1 Round 5935 - Island Hopper (C Model: "HelioRaptor") - Theme: Adventurers / Dino Island [bricklink] [brickset] 5935 LXF Notes: - The HelioRaptor is an inspiration model provided on the back of the instructions for 5935 Island Hopper. Instructions for the HelioRaptor are not included in 5935 Island Hopper itself, but have been provided in the November-December 2000 issue of LEGO Mania magazine (pages 18 and 19). Errors: - Incorrect minifigure decorations - 4733 Brick 1x1 W. 4 Knobs cannot attach properly to 2458 Brick 1x2 W. Horizontal Snap, as this is most likely an illegal building technique. As such, while the brick is correctly placed on the model using scaffolding, it is not attached to the rest of the model. - 2625 Stem Plate 7X6 is not included in LDD and has been substituted with 50303 Stem Plate 7x6 W/Cor. - 30057 Plate 1X1 Round has been substituted with 6141 Plate 1X1 Round 5987 - Dino Research Compound (B Model) - Theme: Adventurers / Dino Island [bricklink] [brickset] 5987 LXF Notes: - The three alternate models for 5987 Dino Research Compound can be built simultaneously. Errors: - Incorrect minifigure decorations - 6069 Wedge 4 x 4 Triple without Stud Notches is not included in LDD and has been substituted with 48933 Roof Tile 4x2/18 W/Cor. - 4859 Wing 3 x 4 with 1 x 2 Cutout without Stud Notches is not included in LDD and has been substituted with 48183 Plate 3x4 W/Angle - 30057 Plate 1X1 Round has been substituted with 6141 Plate 1X1 Round 5987 - Dino Research Compound (C Model) - Theme: Adventurers / Dino Island [bricklink] [brickset] 5987 LXF Notes: - The three alternate models for 5987 Dino Research Compound can be built simultaneously. Errors: - 30057 Plate 1X1 Round has been substituted with 6141 Plate 1X1 Round 5987 - Dino Research Compound (D Model) - Theme: Adventurers / Dino Island [bricklink] [brickset] 5987 LXF Notes: - The three alternate models for 5987 Dino Research Compound can be built simultaneously. Errors: - None! 6037 - Witch's Windship - Theme: Castle / Fright Knights [bricklink] [brickset] 6037 LXF Errors: - Missing/incorrect minifigure decorations - x83px1 Minifig Accessory Cape Cloth with Scalloped Edge and Dull Corners and Spider Pattern is not included in LDD and has been substituted with 56630 Special Mantle. EDIT 3/7/13: Updated 5987 C Model to LDD 4.3.6. EDIT 3/26/13: 5987 C Model bug fix. EDIT 7/12/13: Updated 5935 B Model to LDD 4.3.6. EDIT 12/16/13: Updated 5935 B Model and C Model to LDD 4.3.8. EDIT 1/31/14: Updated 6037 to LDD 4.3.8. Edited January 31, 2014 by PeabodySam Quote
Calabar Posted November 3, 2012 Author Posted November 3, 2012 @PeabodySam Looking at set 5987, are you sure that such a small builds are official alternative models? Perhaps are these part of a single "alternative model?" Look at the upper part of the last page of the instruction booklet. Quote
PeabodySam Posted November 3, 2012 Posted November 3, 2012 @PeabodySam Looking at set 5987, are you sure that such a small builds are official alternative models? Perhaps are these part of a single "alternative model?" Look at the upper part of the last page of the instruction booklet. Technically, all three alternate models can be built at the same time using only the pieces of 5987, as emphasized by a photo on the back cover where all three models are shown together (along with a couple of inspiration models with no known building instructions). Would it be preferable, in this case, to combine the three models into a single LXF file? Quote
Calabar Posted November 3, 2012 Author Posted November 3, 2012 @PeabodySam Perhaps the best thing would be to create the whole scenario showed in the photo on the back cover. Do you think you can do that? Quote
PeabodySam Posted November 3, 2012 Posted November 3, 2012 @PeabodySam Perhaps the best thing would be to create the whole scenario showed in the photo on the back cover. Do you think you can do that? I admit, it is a little pet project of mine that I've been working on, but the issue with this is that, with the exception of the three models provided in my above post, none of the models in the photo have any known instructions and are merely inspiration models. The truck, which is more-or-less completely assembled as seen in the picture I just linked to, is included in LEGO Racers 2's car builder, but LEGO Racers 2 takes some liberties with the truck's design (for example, it uses more white bricks than actually available in 5987) and the chassis is pre-built, meaning that there are not even complete instructions for that. On top of that, all scans of that photo that I can find on the internet (even on LEGO.com's official PDF file) are too grainy and low-res to be absolutely sure of everything in the model. But, unfortunately, even if you were to give me the clearest possible photo straight from the LEGO vault and even pull out the original inspiration models designed by the set designers and hand them to me, there's one major flaw with all of this: Set have to be constructed using official LEGO instructions and not interpreting preliminary or official images. Unfortunately, aside from the three models with provided instructions, to recreate the entire scenario featuring these three models would require a lot of interpretation of a single official image, and that's forbidden by the second rule of this topic. As I said, recreating the inspiration models in the photo is a little pet project of mine, so to answer your actual question, yes: I do think it's within the realm of possibility that I can do it. However, I don't think that said pet project is fit for being indexed in this topic due to the amount of interpretation that is required by this task. Since the three models which I posted do have official instructions and can be built simultaneously, would you prefer that I combine the three LXF files into a single file, or would you prefer keeping them separate? Quote
Calabar Posted November 3, 2012 Author Posted November 3, 2012 @PeabodySam You are right. I gave only a look at the image and I thought that other models are those specified in the built instructions. I've to discuss about this situation with other of the staff. For now leave the post as is then, and add a note that models B, C and D can be built together. Quote
marco9999 Posted November 3, 2012 Posted November 3, 2012 (edited) 7690 - MB-01 Eagle Command Base - Theme: Space - Subtheme: Mars Mission lxf ERRORS: Parts not in LDD replaced with custom bricks: 30585b 58843, 58844 and 58845 x153 30584c01 47122 1x1 round plate is not connected to tube end 58947 in the white spaceship dart 58842 cannot be 2-coloured Missing stickers, rubber belts and proper decorations. 7691 - ETX Alien Mothership Assault - Theme: Space - Subtheme: Mars Mission lxf ERRORS: Parts not in LDD replaced with custom bricks: 30585b 58844 and 58845 x153 30584c01 dart 58842 cannot be 2-coloured Missing stickers, rubber belts and proper decorations. Edited November 3, 2012 by marco9999 Quote
Superkalle Posted November 4, 2012 Posted November 4, 2012 It is actually possible to place part 32310 on the back of the wolf if you take advantage of a small gap between the axle and the lever. Remove 4519, 43857, 43093 and 2780 from the back of the wolf, then connect 32310 to 2M levers 41677 by means of a bar, for example 30374. Then set a 1 degree anticlockwise rotation for 32310, remove the bar and all other parts will fit. If it can help here is the fixed file: 7015_fix.lxf That was a nice workaround (In the meantime I reported the initial bug to TLG). Quote
Superkalle Posted November 4, 2012 Posted November 4, 2012 Errors: - 4733 Brick 1x1 W. 4 Knobs cannot attach properly to 2458 Brick 1x2 W. Horizontal Snap, as this is most likely an illegal building technique. As such, while the brick is correctly placed on the model using scaffolding, it is not attached to the rest of the model. This is a tricky one in terms of illegal technique. From what I have learned it is not an illegal technique in the respect that there is constant compression on any part of the elemenets (the flanges of the 2458 fits inside the cavity of 4733). On the other hand it is not a "designed" connection, but a loose one, and therefore not supported in LDD. I'm not sure what to think myself of this one. Quote
Sjuip Posted November 4, 2012 Posted November 4, 2012 This is a tricky one in terms of illegal technique. From what I have learned it is not an illegal technique in the respect that there is constant compression on any part of the elemenets (the flanges of the 2458 fits inside the cavity of 4733). On the other hand it is not a "designed" connection, but a loose one, and therefore not supported in LDD. I'm not sure what to think myself of this one. I agree, Superkalle. It's not designed, but creative and is used quite often and for some time now. I myself have come across several times, for example in the posted sets 4556 Train Station (turnstile) and recently in 7994 LEGO City Harbour (navigation radar on port side of the ship's bridge roof). Quote
Superkalle Posted November 4, 2012 Posted November 4, 2012 7994 LXF - Truck: Red Technic Brick 1x1 placed aside due to illegal build in truck cabin (supposed to be between two Brick 1x1 with Four Knobs 4733) I actually got the red brick to fit. Just pick it up, and place it, and it will snap. Normally it's an illegal build, but sometimes you can make it snap in LDD; and this is such a case. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.