Jump to content
THIS IS THE TEST SITE OF EUROBRICKS! ×
THIS IS THE TEST SITE OF EUROBRICKS!

Recommended Posts

  • 3 months later...
Posted

You could possibly substitute a mini Linear Actuator (mLA) made by Zblj:

linear_actuator_mini.png

Alternatively, you could possibly re-engineer (mix and match) Zblj's pneumatic LDD parts (pictured below) to create a full-size Linear Actuator part that can be adjusted within LDD. A Lego Technic Axle sliding up and down the center of 2x2 Round Bricks looks like a LA, if you color it Light Bluish Gray and attach the appropriate connections on the top and bottom....

big_cylinder.pngbig_pump.pngsmall_cylinder.pngsmall_pump.png

  • 2 months later...
Posted

Good question. I don't think there is such a trick, but maybe someone else knows.

I have just created LXF file containing rectracted LAs.

LAs.lxf

There are 21 of them, each with different length (with step of 0.25 stud).

There are 4 groups:

1. length 0, 1, 2, 3, 4, 5

2. length 0.25, 1.25, 2.25, 3.25, 4.25

3. length 0.5, 1.5, 2.5, 3.5, 4.5

4. length 0.75, 1.75, 2.75, 3.75, 4.75

(remove the extra axles and other parts, they are there just to prove propper alignment).

Posted

I have just created LXF file containing rectracted LAs.

There are 21 of them, each with different length (with step of 0.25 stud).

There are 4 groups:

1. length 0, 1, 2, 3, 4, 5

2. length 0.25, 1.25, 2.25, 3.25, 4.25

3. length 0.5, 1.5, 2.5, 3.5, 4.5

4. length 0.75, 1.75, 2.75, 3.75, 4.75

(remove the extra axles and other parts, they are there just to prove propper alignment).

Great work hrontos! These will come in very handy indeed!!

Posted (edited)

Great work hrontos! These will come in very handy indeed!!

The similar thing done with shock absorbers.

So compressed shock absorbers:

ShockAbsorbers.lxf

(Only one of the has length that can be aligned with a beam holes).

Edit: I updated the file during edit to include all more types of shock absorbers.

Edited by hrontos
Posted

The similar thing done with shock absorbers.

So compressed shock absorbers:

(Only one of the has length that can be aligned with a beam holes).

Once again, super work :thumbup: I'm surprised no one have thought about this clever solution before. I mean, it solves a lot of problems in a very elegant way.

Posted

Once again, super work :thumbup: I'm surprised no one have thought about this clever solution before. I mean, it solves a lot of problems in a very elegant way.

Thank you, I am sorry, I updated the file in the mean time, to include more shock absorber types (I am not sure about the colors, but anybody can color it).

Posted

I have just created LXF file containing rectracted LAs.

LAs.lxf

There are 21 of them, each with different length (with step of 0.25 stud).

There are 4 groups:

1. length 0, 1, 2, 3, 4, 5

2. length 0.25, 1.25, 2.25, 3.25, 4.25

3. length 0.5, 1.5, 2.5, 3.5, 4.5

4. length 0.75, 1.75, 2.75, 3.75, 4.75

(remove the extra axles and other parts, they are there just to prove propper alignment).

Great, Great Work !

Thanks a lot for having shared :sweet:

Neuro

Posted

I'm sorry if I'm missing the obvious, but may I ask - how was is that the LA's were modified to different extension lengths?

Cheers ~ Perry

Luckily, the absence of retracted LAs was not a problem of how LAs are modelled in LDD, it was only problem of missing functionality in LDD user interface (there is nothing similar like hinge button that could be used to retract LAs or compress shock absorbers). So I modified the LXF file and changed position of LA "piston" to make it look retracted. May be TLG will add function to do such operations directly in LDD without editing the LXF file.

Posted (edited)

Luckily, the absence of retracted LAs was not a problem of how LAs are modelled in LDD, it was only problem of missing functionality in LDD user interface (there is nothing similar like hinge button that could be used to retract LAs or compress shock absorbers). So I modified the LXF file and changed position of LA "piston" to make it look retracted. May be TLG will add function to do such operations directly in LDD without editing the LXF file.

For a second there I imagined that you were Neo - and what appear to us mere mortals as linear actuators show up for you as green characters falling down the screen - and you just will the matrix transformations to happen with only your thoughts ... how cool would that be??? :grin:

Edited by PerryMakes
Posted

For a second there I imagined that you were Neo - and what appear to us mere mortals as linear actuators show up for you as green characters falling down the screen - and you just will the matrix transformations to happen with only your thoughts ... how cool would that be??? :grin:

:laugh: I am happy to see things in "True color". But sometimes, it would be nice to move things just by power of thought.

  • 11 months later...
Posted

I have just created LXF file containing rectracted LAs.

LAs.lxf

There are 21 of them, each with different length (with step of 0.25 stud).

There are 4 groups:

1. length 0, 1, 2, 3, 4, 5

2. length 0.25, 1.25, 2.25, 3.25, 4.25

3. length 0.5, 1.5, 2.5, 3.5, 4.5

4. length 0.75, 1.75, 2.75, 3.75, 4.75

(remove the extra axles and other parts, they are there just to prove propper alignment).

Thank you, very handy!

  • 11 months later...
Posted

I have just created LXF file containing rectracted LAs.

LAs.lxf

There are 21 of them, each with different length (with step of 0.25 stud).

There are 4 groups:

1. length 0, 1, 2, 3, 4, 5

2. length 0.25, 1.25, 2.25, 3.25, 4.25

3. length 0.5, 1.5, 2.5, 3.5, 4.5

4. length 0.75, 1.75, 2.75, 3.75, 4.75

(remove the extra axles and other parts, they are there just to prove propper alignment).

Great work !

Thanks a lot for shared :sweet:

  • 7 months later...
Posted

Sorry to bump this topic, but have someone made the Mini LA in differents stages, like hrontos did with the normal LAs?

I see the ones for the outriggers on the LDD 42009 in this forum are fully retracted, but I'd really like one fully extended for a LDD project I'm working on! :classic:

  • 1 year later...
  • 2 months later...
Posted

The similar thing done with shock absorbers.

So compressed shock absorbers:

ShockAbsorbers.lxf

(Only one of the has length that can be aligned with a beam holes).

Edit: I updated the file during edit to include all more types of shock absorbers.

How did you make this?

I need to make one with the black bit of the standing ones and the yellow bit of the ones on horizontal,

Please advise.

Kind regards

Carlos

  • 1 year later...
Posted

Sorry to revive an old topic, but I'm sure this will help others, trying to add linear actuators to their models.

I needed some large linear actuators in my model that were not fully extended. The trick is the create an empty LDD drawing, with the actuator in it. Then, save it, without adding anything else. Rename the file you just saved to la.zip. You should now be able to open the file and find a file, called IMAGE100.LXFML. This is an XML file, which you can read or edit. You can also find this file here. Below are the important parts of the file (you can open this with notepad, our your favorite editor):
 

...
      <Part refID="1" designID="62275" materials="309">
        <Bone refID="1" transformation="-1,0,0,0,1,0,0,0,-1,6,1.2000000476837158,0.40000003576278687">
        </Bone>
      </Part>
...
      <Part refID="3" designID="62274" materials="199">
        <Bone refID="3" transformation="-1,0,0,0,1,0,0,0,-1,6,1.2000000476837158,0.40000003576278687">
        </Bone>
      </Part>
...

 

When you modify the value 6 (so, the value after -1, before 1.20000...) into something else you will see the actuator is extended or retracted. The LXFML file can also be opened directly in LDD. So you can play with the values, double click the file and you can see the result of your changes.

When your satisfied with your changes, save it and now you can import this into your model, using the "File -> Import model" menu.

I hope this helps someone.

  • 4 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...