KirTech LAB Posted October 30, 2014 Posted October 30, 2014 (edited) Hello All!!! After my holiday i’ve come back with new ideas, so there is the first one. I was inspired by Filsawgood’s Airfield Tug and decide to create my own version of this machine. I am glad to present a scale model of non-existent Heavy Multifunctional Aerodrome Tow Truck in a technic-figure scale. The model is 77 cm long, 23 cm wide (without mirrors), 13 cm high (without exhaust), the weight is 4,45 kg. It took me about 1,5 months to create it. Short video presentation: And winter test-drive: The model have eight RC functions (seven useful + compressor) and manual controlled winches and lights (total 12 motors). - moving (three XL-motors); - independent front and rear steering (two servo-motors); - lifting jacks (M-motor, eight pneumatic cylinders); - cab lifting (M-motor, two pneumatic cylinders); - front PPTO (M-motor); - rear PTO (buggy-motor, slow output); - winches (two L-motors); - light (twelve LED pairs). The transmission is very simple but rather reliable, one motor per axle with 1:3 reduction and differential gear. There are no safety devices in winches because I want to get maximum power. So i provide a fast-unwind mechanism. Winch hook is used like a movable pulley giving theoretically double gain in efficiency. All mechanisms are covered with protective covers. The accumulators turns on/off on the top of the model. There is a lightning switch in the rear part of the truck. The model have lightning around the periphery. Pneumatic is working due to four-pump compressor and RC valves. The lifting jacks are the old-type large pneumatic cylinders mounted on the chassis. Lifting cab function improves operator survey. It is very useful if we connect external mould-board. The mould-board height is controlled by using PPTO. Rear PTO is used for different attached implements. For demonstration I’ve constructed an external boom-crane (the length – 89 cm, width – 22 cm, transportation height – 19 cm, boom length – 95 cm, weight – 3,65 kg). We need to connect crane to the main tow truck for lifting jacks activation. Comfortable crane transmission creation was non-trivial task. I’ve took all the controls out to the operator cab (every lever changes the direction of its own function). Manual control allows to rotate tower, rise and extend the boom. At the small angles we need to rise boom with rear winch because actuators can’t conduct such big load. Another cool feature of the crane is wheels hiding. It is necessary because the wheels prevent tower rotation. I try on my white-stripped rims from 41999: More photos: https://flickr.com/photos/141718063@N06/albums/72157669696422836 Thanks for watching! Hope you like it! Edited January 1, 2020 by desert752 Quote
Zerobricks Posted October 30, 2014 Posted October 30, 2014 (edited) What a massive piece of machinery! The dteails and completness is amazing. Only think worrying me is the CV joints... Do they hold? Because 1:4+ gearing from XL motor is a lot for those. Edited October 30, 2014 by Zblj Quote
VKTechnic Posted October 30, 2014 Posted October 30, 2014 This thing is huge! Good job on all the details and functions, and the pictures are amazing as well. Quote
Blakbird Posted October 30, 2014 Posted October 30, 2014 An astoundingly unique creation executed perfectly. Thanks for sharing. Quote
darksheep Posted October 30, 2014 Posted October 30, 2014 A stand creation ,a very different type of vehicles with a large amount of different functions ,very cool love all the lights The attachments are very cool as well , love how the wheels rotate on the crane ! Quote
MajklSpajkl Posted October 30, 2014 Posted October 30, 2014 Very impressive!!! The main vehicle wasn't big enough, so a "small" crane add-on came really handy ;-) I love it, and also envy you the collection of parts, white stripe wheelt the most Quote
Rishab N Posted October 30, 2014 Posted October 30, 2014 Absolutley insane. This creation is so perfect with all the details. I like how the trailer wheels turn like the Delorean Quote
Black-Build Posted October 30, 2014 Posted October 30, 2014 That's a really nice machine! Love it! All those functions and that its low to the ground! Great job! Quote
grum64 Posted October 30, 2014 Posted October 30, 2014 (edited) I'd say this is incredible but somehow it just doesn't seem do it justice! To be honest, I can't think of a word that does! Edited October 30, 2014 by grum64 Quote
KirTech LAB Posted October 30, 2014 Author Posted October 30, 2014 Thanks for comments! I am glad you like it! What a massive piece of machinery! The dteails and completness is amazing. Only think worrying me is the CV joints... Do they hold? Because 1:4+ gearing from XL motor is a lot for those. Yes, CV joints are Ok. If rear wheels don't fit the trajectory there is another problem - the tires tend to fall off, but with careful driving it is not critical! Quote
nerdsforprez Posted October 30, 2014 Posted October 30, 2014 WOw, this really is amazing. Great engineering. DO you have a site to share with everyone of other creations you have built. With this level of expertise, I am assuming that there are many other models you have built. Quote
Good old Lego builder Posted October 30, 2014 Posted October 30, 2014 Looks great. Does something like this really exist? Quote
timslegos Posted October 30, 2014 Posted October 30, 2014 The hugeness is what amazed me, great work! tim Quote
AndyCW Posted October 30, 2014 Posted October 30, 2014 Wow that looks amazing. The complexity and uniqueness are definitely selling points. v/r Andy Quote
jorgeopesi Posted October 30, 2014 Posted October 30, 2014 Wtf I need to see the real one is nice to watch new machines :thumbup: . Quote
miguev Posted October 30, 2014 Posted October 30, 2014 Mind = blown. I don't even understand some of the functions :D Quote
zux Posted October 30, 2014 Posted October 30, 2014 What a great piece of machinery! If you wouldn't say it is fictional I would believe there is one build for real. Quote
filsawgood Posted October 30, 2014 Posted October 30, 2014 Very serious, very large, very functional! This is the best tug undeniably! I like it! P.S. I am very pleased that inspired you my creation, thanks! Quote
__________________________ Posted October 31, 2014 Posted October 31, 2014 Very nice and probably very realistic: but the ground clearance seems too little for everyday RC driving. Quote
VKTechnic Posted October 31, 2014 Posted October 31, 2014 Very nice and probably very realistic: but the ground clearance seems too little for everyday RC driving. Airports are pretty flat, I don't think you need much ground clearance. Quote
Jim Posted October 31, 2014 Posted October 31, 2014 This is absolutely ridiculous....in a good way Fantastic MOC! I love all the functions you've incorperated. Very well done. My compliments. The lifting jacks are so cool Quote
KirTech LAB Posted October 31, 2014 Author Posted October 31, 2014 Thanks a lot!!! WOw, this really is amazing. Great engineering. DO you have a site to share with everyone of other creations you have built. With this level of expertise, I am assuming that there are many other models you have built. Thanks! You can see some models on EB: Grader - http://www.eurobricks.com/forum/index.php?showtopic=84978&hl, Enzo Ferrari - http://www.eurobricks.com/forum/index.php?showtopic=92626&hl, Harbour Crane - http://www.eurobricks.com/forum/index.php?showtopic=87224&hl, The Arrow - http://www.eurobricks.com/forum/index.php?showtopic=85128&hl, Tower Crane - http://www.eurobricks.com/forum/index.php?showtopic=85420&hl and some others. I haven't my own site now but you can try to open my page on DoubleBrick - http://www.doublebrick.ru/all_mocs/desert752 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.