motomatt Posted March 19, 2016 Posted March 19, 2016 My construction equipment 42030 wheel loader and ultimate 8043 excavator needed a dump truck... but I figured a detachable tilting dump trailer would be even better. So here it is in orange and black. Here is a video showing some of the operation About a year ago I built my first MOC, a yellow and black Peterbilt with a liftable axle. Since then I learned how to improve many parts of it and I incorporated them in this model. This Peterbilt looks similar to the older one at first sight but has too many changes and updates to list. I've got a custom battery box which uses eight rechargable AA batteries and the goal was to fit it all under the hood. The gear shifter activates the head lights, roof lights, tail lights, as well as a PF connector at the rear used to connect to the trailer. More pics and instructions here http://bricksafe.com...tt/peterbilt389 http://rebrickable.c...black-and-orang Quote
Kendo12 Posted March 19, 2016 Posted March 19, 2016 Really nice! I think I need a dump truck for my wheel loader Quote
Karle Posted March 20, 2016 Posted March 20, 2016 Very nice indeed! It appears that some of your improvements can also be applied to the tri-axle Pete as. How did you mod the battery box to hold 8 batteries? I've already added this to my build list. Quote
nastystage Posted March 20, 2016 Posted March 20, 2016 Great!! The only thing i'dont like so much is the color scheme. I'm very curious about the battery mod Quote
jono rocky Posted March 20, 2016 Posted March 20, 2016 An amazing show class truck. You have captured the Peterbuilt amazingly and that trailer is perfect. Quote
lcvisser Posted March 20, 2016 Posted March 20, 2016 Very nice! Like a grown-up version of http://brickset.com/sets/42023-1/Construction-Crew I like all the details on both the truck and the trailer and the color combinations is something new. Are both rear axles of the tractor driven or only the first one? And is there suspension on the trailer (couldn't see). Too bad you couldn't fit double wheels on all three axles of the trailer due to the linear actuators. Quote
motomatt Posted March 20, 2016 Author Posted March 20, 2016 Thanks for all the nice comments guys. I'm very curious about the battery mod I found that using six rechargable batteries (which have a lower voltage) produced slower rotation when driving one or two XL motors. So, adding two more AA batteries raises the output to 9-10 volts and results in more horsepower for the trucks It all fits underneath the hood. I like all the details on both the truck and the trailer and the color combinations is something new. Are both rear axles of the tractor driven or only the first one? And is there suspension on the trailer (couldn't see). Too bad you couldn't fit double wheels on all three axles of the trailer due to the linear actuators. The color scheme came about since I already had a yellow/black truck, a red/blue/white truck, I thought doing something in orange would be a bit more challenging and unique... and black obviously goes well with orange. I usually just drive the forward most rear axle on my trucks since it's always on a flat surface. With one additional step you could drive both axles like a real truck. http://bricksafe.com/files/motomatt/Custom%20Lego%20Peterbilt%20379/instructions/peterbilt379_rear_drive_axle.png I did not even attempt to add suspension to the trailer. Before this, I created my trailers with suspension and so I thought I would do this one without any to see the end-result. Also, the first iteration of the dump trailer only had two axles. The bonus of squeezing an additional axle for a more realistic look came about when I shifted the geometry of the linear actuators and the dump trailer pivot point upon finding that I needed to provide a better angle to push the dump container upwards. Ideally the extra axle would be liftable... but that was a bit too much. I think the biggest challenge of the build was to find a compromise between achieving the maximum raised angle of the dump container, and the ability to actually put any weight in the trailer to dump. The tilting dump container was constructed to be as light as possible. As it is, loaded with a pound and a half of cereal it's close to the limit of being able to raise up with two linear actuators. If it were loaded with sand or rocks it would not be able to go up. Of course, it would be nice to be able to utilize a giant 3D printed linear actuator and place it on top of the fifth wheel of the truck for more realism... like bricksonwheels display dump trailer. Quote
timslegos Posted March 20, 2016 Posted March 20, 2016 Orange and black looks great, as do the renders. You definitely captured the feel of an American truck. I would suggest using sawdust (or animal cage bedding) for a play material instead of what I think is cereal. The sawdust doesn't crumble and has good dirt like characteristics while also being light weight. Quote
powder12321 Posted March 20, 2016 Posted March 20, 2016 Wow, so cool truck! I really love the desing and colors! Quote
2LegoOrNot2Lego... Posted March 22, 2016 Posted March 22, 2016 Nice build again, as we might expect from you!!! Nice colors...well done... Quote
motomatt Posted April 19, 2016 Author Posted April 19, 2016 For anyone that may be interested the instructions for the dump trailer can be found here http://rebrickable.com/mocs/motomatt/117-scale-tilting-dump-trailer-in-orange-and-black Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.