Madoca 1977

Fortunately I had a chance to see you driving this monster in the event. Amazing model. I especially love the bodywork. It looks like a Moby Dick, but also runs unbelievably fast!

That picture is rm8's studio. I'm surrounded by HIS creations! Anyway, I drove this truck in Russian community event. Pictures and videos of the event can be seen on the site of LEGO Technic Russia. From now building instruction is available at Rebrickable. And the picture below is how it looks with 120mm tires. I think these RC4WD tires are the same ones as Sariel had used for his Crawler and Baja Truck.

Last night I visited the studio of my friend rm8. We made a review of my Monster Truck! Now we arrived Moscow and will join the event of Russian Technic fans. Instruction will be available after coming back to Japan.

Thank you for watching! I wanted to use dual shocks only because its look. As the black version does, using single hard shock for each wheel is enough to hold the body. But dual soft shocks was a little bit unstable.

Hello everyone. As a monster truck MOC was one of my earliest creations, the time has come to remake it! Weight: 2030g - Powered by 2 SBricks - 4 XL motors for propulsion - 2 Servo motor for steering - M motor for switching steering mode (normal/crab) - M motor for raising front hood and rear bed - LED lights for headlights - Openable doors and tailgate Those old-school power functions components still work sufficiently in this MOC. The body was inspired by 80's monster trucks made from lifted and modified Ford pickup trucks. The under structure was designed for robustness. Eventually it looks more like modern tubular chassis. There could be multiple options for the sets of dual shocks. (Hard/Soft, Hard only, H/H, S/S) Vertically placed M motor moves Polarity Switch connected to rear Servo motor. Horizontally placed M motor is for two functions. Front hood opens via worm and 24T gear. On the other hand rear bed is raised via small actuator. That requires two driven axles of different torque and rotational speed for each side. Center differential enables single motor to transmit the power to both sides. One of the benefits of portal hub is easy to change gear ratio. Body parts could be replaced with different color scheme, though they are not fully modular. On November 2nd and 3rd, Monster Jam live was held in Japan for the second time. I did go to the event and took photos of amazing real monster trucks and drivers. Thank you, Bari Musawwir and Neil Elliott! Building instructions available at Rebrickable.

2: 10 5: 6 4: 4 7: 3 1: 2 8: 1 Actually I fell in love Seasider’s custom sticker of technic pin flying over the mars:)

Nothing has changed in using parts and building results. Just a few parts were connected before they should be in older 24-25 steps photos. Perhaps builders who noticed that may jump step 23 to 26 and follow the rest. Don’t worry, I see you built it perfectly right. Thank you for building!

I am very sorry, I rechecked instructions again and noticed that I have used wrong photos for step 24-25. I just fixed it. If you have already copied early version of instructions, please check the (tiny) differences and use correct photos. Turns our concentration on working became lower than in my 30s...

3810g is more than 1kg heavier than the old one. The inclination in the last part of video is 40 degrees. Surprisingly there was no gear clicking in that scene. I think because all wheel (8 pairs of bevel gears) equally shared the load.

This odd suspension linkage was necessary to make chassis narrower because steered axles with portal hub move wheels deeper toward the center of frame. For years I’ve been searching how to conquer terrain and gravity. And I’m still looking up your 8 XL powered FOX 8x8x8. This is yet another answer to it.

Thank you! For me sharing MOC is purely enjoyable. Making money is not. Even though I’m not rich at all. The truth is, I’m a stubborn cynic who wants to go against the grain.

I’m sure that will lead to even more clicking because it is much heavier and putting larger tires.

Hello everyone. This is my second Tatra model.Comparing to previous Tatra 813 Trial Truck built in 2014, it is bigger, heavier and a little bit faster. Weight: 3810g Length: 62.4cm Width: 24cm Height: 25cm -Powered by 2 SBricks -6 L motors for propulsion -2 M motors for steering -M motor for 2 speed gearbox -Working steering wheel and V12 engine -Openable doors, front grill and roof hatch The model was specifically inspired by a unique truck of Jansa Team participating at real truck trial events. I tried to replicate overall look as possible without using any stickers. The cabin became one stud longer than it should be. Also using many system parts was somewhat compromising as a Technic builder. This time I omitted offset axles because symmetrical structure was more robust and efficient. Each side of half axles are independently driven via two parallel drive shafts. That enables slightly smoother turning than previous one adopted single drive shaft. Body parts are removable by pulling out both seats and two 5.5L axles behind the rear bed. When I completed the chassis early in 2018, it never came to my mind that LEGO would officially release "game changing" planetary wheel hub. Admittedly those bulky half axles using portal hub look outdated in 2019. The core of chassis contains bunch of L motors which I called 'Six Pack Abs'. The gearbox is simple yet packed 16 gears into tiny space between L motors. Although suspension mechanism is not like real Tatra, pairs of swing half axles move like real one. That realizes good off-road capability. The steering angle of 1st axle is twice as 2nd axle. Two hard-coupled M motors move 13L gear rack via dual pinion gears. For more powerful steering, I did not use white clutch gears. Consequently geared down motors keep rotating and make clicking noise when gear rack reaches end position. After all, this MOC ended up to be just a big truck driven by old technology. (Strangely it sounds like aged Tatra 813 in modern truck trial events...) Still I am happy with the result and sharing another massive 8x8 model. If you like it, feel free to put colorful stickers on it, make alternate cabin design or build more accurate chassis with new hub parts. Building instructions available on Rebrickable.

Thank you for your kind words! Actually this gearbox was inspired by rm8’s idea of assisting rear axle by another motor. It is always interesting to make it simple, effective and reliable. Some models without instructions are still in my to-do list. I will fix or improve them like I did for Dacoma truck.

Hello everyone! Thanks to the purple Titanian, it took 18 months for coming back from yet another dark age in my life. Now I am here with yet another pickup truck. Design was inspired by Ford Raptor, Dodge Ram and GMC Sierra. Dacoma 4x4 Redux Weight: 1360g -Powered by Sbrick -2 L motors for propulsion -Servo motor for steering -M motor for two speed gearbox, (sort of) limited-slip center differential and lockable rear differential -LED for headlights -Openable hood,doors and tailgate Video: https://www.youtube.com/watch?v=qMUH1YmF1F4&t=1s This is an improved version of my Dacoma pickup truck and TLC 80. I could not finish building instructions for them because they had fatal drawbacks on their drivetrain. In low gear, bevel gears in center differential often skip and pop out by the torque of propulsion motors. To make it reliable, it was necessary to reduce the stress on center diff while handling higher torque in low gear. The gearbox works sequentially. (1 - 2 - 3 - 2 - 1) 1: High - 2: Low - 3: Low with rear diff lock In low gear, center diff works like limited-slip diff. In high gear, two L motors are coupled and rotate center differential together. Front and rear axles are driven via open center diff. In low gear, only one L motor rotates center diff. Another motor is connected only to rear axle. (In other words, it just supports rear half of drivetrain.) Which means rear half of axle in center diff is (nearly) locked. That means front half of axle in center diff is locked as well. Maximum suspension travel is not as long as older Dacoma truck. But new one articulates better thanks to softer front suspension. Years ago I happened to get some rare blue parts from old sets. So I could build it in blue. With a few tweaks, it can be built in white, orange or black. Building instructions: https://rebrickable.com/mocs/MOC-25520/Madoca1977/dacoma-4x4-redux/#comments I hope you will like it. And I will work hard not to take a long time for sharing next model.