Therion

I would like to see the partslist before buying the instructions to see how many missing parts I have. It's not on rebrickable is it?

Here you can find several pages with instructions for various chinese brands: https://www.yourwobb.com/pages/library

I don't think it was ever on rebrickable

Just finished this amazing build. Despite it's huge size and weight, it works flawlessly For more pictures: click here

Does this link work?

In just ran into a small problem with the two legs on page 146. The 2 pieces that should go on both rear sides of the legs won't fit, because the black inverted tiles 2x2 are in the way. When looking at the photos, I can see that those inverted tiles are placed one stud higher than as shown in the instructions.

@Freezer118 On the rebrickable page there's a link to an excel-file with parts per booklet. I used it to sort the pieces for each booklet.

I paid around € 700 for 7.300 missing pieces.

Finally complete, what a beauty! More pics here (when public).

Book 4 is scheduled for next weekend, I'll see how it goes No problems so far:

Finally ready to start building!

Just started ordering my missing pieces for the Agressor I was wondering if there's a partslist per booklet available somewhere? That might be easier during the building proces

One final comment: Page 215, callout step 1: the orange 1x2 liftarm should be one with a pin hole and axle hole. This one does not exist in orange I believe. (Same goes for page 220, same step for the other side of the car) I really must say, it's a stunning car. Very well done! More pics here

Great work, thanks Thorsten! I see you also added the LA's and the mini-LA to the partslist, they were missing (also at rebrickable). page 102 step 89: don't place the long pin with stopbush, there's a 7L axle supposed to go through there in step 95 (page 110) page 174: callouts are swapped page 186: I guessed the 2 pins go beneath the orange panels, but it's not visible from this angle page 187 step 152: assembly is floating, I would move this step after step 154 at page 190 page 207 step 167: partslist says 1x 12L flex-axle, but it should be 2x. I think the total inventory is 1 short too, because of this. Should be total of 8, and not 7. This is how far I got last weekend (page 213): I did a testdrive with the wheels on, and I found that in highest gear some gears were skipping, the other gears are working fine. Standing on the jacks, all gears work fine, so I guess the weight is a bit too much for the highest gear to get it going.

Actually, it's great fun playing with the controls while it's on it's jacks The gearbox works great, even while 'driving'. On the other hand, who needs a gearbox when you have a BuWizz with speed control More pics here (when public)

I've started to build this beauty last weekend, and so far I didn't found any real problems, but I do have some minor comments about the instructions: (note: the pagenumbers correspond to the numbers printed on the page, not the actual pagenumbers from de pdf-file): page 29 steps 19,20: why is the axle in an angle? When you build it, it is straight. Only if you press the springs the axle turns. page 35, callout step 2: I think there's a (3L?) pin missing here, the (o+) connector is floating. page 40, step 7: callouts are switched page 59 step 57: took me a while to find the part, an arrow would have been nice page 60 step 58: the 3L pin overlaps with another pin, so it can't be placed there page 99 step 4: the black pin is out of position, I think it can be left out completely Most of the hoses are a bit long, but I have no real problems tucking them away so far Currently I'm at page 109. I took some photo's while building, but they are still on my camera... I'll post some later

Yes I did, and no I won't mind, but I don't think it's possible to make public profiles right now, with the current beta version. Or maybe I'm missing something? But you can easily make a profile yourself, this was the first profile I ever made, and it took me about 3 minutes.

Awesome model! More pics here

My orderstatus is still 'in warehouse', allthough I also ordered it on june 1st

Great work on the instructions Alex! I'm planning on building the Terex again using your instructions, somewhere in the next few months.

Are you sure? I'm currently building this, and I have 4 L-motors connected to a single V2 receiver (2 per channel), and the servo to a second receiver and it works fine.

I would like to see a new 3D building program with all available parts, combining the best functions from LDD, MLCAD, LPUB etc.

I had this problem too. I solved it by replacing one of the thin 1x3 liftarms with a 1x2 liftarm (on both sides of the car).

I've made quite a few as well: Nathanael Kuipers 8458C Silver sportscar 8458D Silver street sensation 8458+8466 Convertible supercar 8458+8466 GT-car Pony car Madoca Corvette C3 Stingray 6x6 Monster truck Rock Crawler Supercar Tatra 813 jurgen krooshoop: Ultimate 42009 Backhoe Little Devil sportscar Zorex Excavator Crowkillers Lamborghini Gallardo Lamborghini Murcielago Porsche 997 GT3 Vampire GT Erik Leppen 8285C Dump truck 8285D Fire Truck 8421C Towtruck Han67 8421 XXL Dumptruck Bart Olszewski 42038C Crawler crane Jovel 9398C Buggy Stefan Birkefeld Lamborghini Aventador Sky-liner Lamborthini Countach Tech-Nick Crane Truck Gerger Grove GMK6400 mobile crane Lipko Red Coupe Nico71 Roadster D3K Swingloader Sheo Terex RH400 JaapTechnic Scania Towtruck Dikkie Klijn Tow Truck XL Plus there's a bunch of starwars nmocs I've build, but I won't bother posting them here And much more to come!!

Towball-pins in combination with technic links work very well too: