legofrik

QL.

Any news about the same position of CMFs in other boxes you buy?

@ Man with a hat, It's possible. Maybe they pack one day in order I wrote, next day in different order and so on. Don't know, just guessing. @ greg3, I'm glad to help.

I don't know how factory packed their boxes with CMFs, but it will be strange, If every box will be filled differently. Why changing the program and do that for every box? Or they fill it manually and one worker just had a good day and fill it for 20 CMFs in each section and all on the same order. Could be...

@ gamejutzu, I can confirm it for the box from Jirny, LEGO EU Distribution center, Czech Republic. @ Sinthoras, exactly. , But box must be from Jinry. I guess, they don't fill each box with different order of CMFs.

Hi all. My English is not so good, but still, I hope that this information will come in hand for some people who will like to buy just a few LEGO minifigures from this serie. Moderators, If this info already exist, sorry for duplicity. Please delete this post. Well, today I got the box of this CMFs. Inside of the box are 3 complete CMF series, each in one section (box has 3 sections - left, middle and right) and in each section, minifigures are on the same position. They are packed in the order - from front to back... 1. Shark Army Angler 2. Volcano Garmadon 3. Shark Army General 4. Garmadon 5. Shark Army Great White 6. Shark Army Octopus 7. GPL Tech 8. N-POP Girl 9. Sushi Chef 10. Flashback Garmadon 11. Master Wu 12. Lloyd Garmadon 13. Zane 14. Cole 15. Jay Walker 16. Lloyd 17. Spinjitzu Training Nya 18. Kai Kendo 19. Misako 20. Gong & Guitar Rocker I'm not 100% sure that all the boxes all over the world will have the same position of CMFs in the box. This box come from Jirny, LEGO EU Distribution center, Czech Republic.

Thank you!

THX m8.

@Boettner Builds THX, I'll be honored If you'll make a replica. @Kristel, THX!

@ColletArrow, yes I'll add some down-pipes directly on diorama. Geenery will be mabie added later on summer edition. @Cwetqo you wish. THX both for the compliments.

THX both of you!

Another creation for diorama on incoming event - in winter edition. No interior has been made. I also try to put on some icicles, but I didn't like them at all. When I'll put it on diorama, some utensils, decorations and accessories will be added. For now it is, what it is. Credits for "Stop buffers" goes to Karwik. I like the idea, but I made my own version of it.

THX SpinX125 and Man with a hat. About complete layout, you need to wait until October 21st. In the mean time, you can see some pictures of our exhibitions here (use navigator on the left for browsing the events): http://www.kocke.si/kockefest/eng_kf18.php

HA bricks link works OK, but they have their page temporary down.

@ColletArrow. I have made two of them. Here are together with BR80 made from Ha Bricks. I know about the solution with flexible wheelbase. Also with an option when connected two wheels with hose.But problem is, that than I can't use the custom chassis (like I want) and LEGO wheels together, because in case I mounted the turntable, the distance from wheels will increase for two plates. I tried it and it looks ugly. For our exhibitions we stop using LEGO curved rails and we use only ME Models, except with switches, so there is no problem with friction anymore. Yes, the doors. Problem is, that there are no "jumpers" in dark green color, so I used black ones on bottom and DBG on the top of the doors and I wasn't satisfied. THX for the tips!

Goal was to make as similar wagon as this one from Roco company, which make locomotives, wagons etc for model railway. This wagon was made in Epoche III and for "Deutsche Reichsbahn (DDR)". Of course, some modifications and compensation was made, because of lack of some LEGO pieces in right color or they are too expensive, like curved slopes for the roof in metallic color. Emmm, I'm sorry for the unclear pictures. Wagon is without interior, because there is no room for anything detailed, except LEGO seats. I try to make chassis frame as on the picture, but use the original LEGO wheels. The wheels are a little bit too far from each other what causes some friction on LEGO curved rails, but on bigger radius like ME Model tracks has, there is no problem at all.

Cwetqo, THX!

THX Cwetqo. BTW, come to coffee as you planned and you'll see it.

@ gotoAndLego You mean this piece? What to do with that?

@pinioncorp, THX, About window ledges... I still don't know If I put on 1x4 LBG tile or some "snow". Accoriding to white wall, there were probably be tiles.

@lightningtiger THX m8! @gotoAndLego THX for suggestions. I'm open for new solutions and salute the suggestions, so no hard feelings at all. First sorry for my "broken English", I hope you'll understand what I'll write. The windows are on that low position because of the balcony above the door. Dark red plates above the door and windows are on the same position. So I need to take a compensation and lower the windows. About the snow. I know, white building on white snow will hide, but this building will stand on clear LBG base plate and there will be also a few things around it to break up the monotony of color. It's a "heavy" job to make lots of building for snowy diorama and not to use white color for the walls, especially that village will looks like villages in Alps - mostly white and brown combination of color. Icicles. I thought about them. I thought to use 1x1 plate with clip at the edge of the roof and put the spear tip with fins on them. And for small ones this horn But according to the roof angle, they can't be put nicely into clips (to stand verticaly down), so I decided not to use them - If you know what I mean. BTW, do you have any other solution?

Look nice and the round/oval shape is recognisable. For my taste, a little bit too much trees for that small park. Love the idea how you used window pane lattice for "bench" (?).

@carebear THX! @Redhead1982 my "special powers" are unpredictable as my imagination. So I used broken bucket handle as a door handle - on both floors BTW.

@ColletArrow, thx m8! Yes, it's a little bit taller, because of the roof, which must be under 45 degrees to hide the gaps above the "planks" as much as possible. Sorry, it's without interior. I usually make my creations for the exhibitions, where interior is not important, because it can't be seen. I was thinking to post it under Train section, because it's a railroad structure, but it's still a "house" and I decided to put it here in "City" section. If moderator think, it will better fits in Train section, please move it there. Thank you!

Goal of this MOC was to make a replica of Faller Railroad Signal tower. I made it in Winter edition, because it will be part of winter diorama for our next exhibition in October. Of course, it can't be 100% the same as Faller made, but I hope I manage to made the recognizable details.