Ramses25

You don't need to, the cockpit looks already amazing ;) The engines are the two technic bush at the rear. They should be bigger but this is the most accurate version I managed to build. I based my MOC/MOD on this FFG X-Wing miniature for the rear part.

Thanks everyone ! Feels good to be supported :) I will definetly give it a try later. I think Jerac will update his cockpit design for his TIE Advanced X1, maybe I'll wait his update before trying anything here. Still I made some progress on the model. I changed the whole "shield/hyperdrive column" to a more accurate rounded shape. Very happy with the result ! But I'm definitely stuck with the rear solar panel shape. Tried tens of techniques but none looked good and sturdy, and I don't want to change the whole wing connection to keep the "spirit" of the original design so they can fit side by side.

I recently bought Jerac's TIE Advanced instruction on Brickvault and was amazed by the model. But I want it to be "mine" a little bit more. So I started modding it to design a TIE Agressor. The TIE agressor was developped before the Battle of Yavin to give the Empire a multi-role fighter. Its weapons loadout, especially its back turret, give it the ability to sustain long engagement. The front cannons were placed under the wing pylons to leave space in the cockpit to fit a rear gunner. The new profile of the solar panels don't allow the TIE Agressor to collect a lot of energy, reducing its manoeuvrability. The model is still WIP. I'm happy with the turret and the front cannons. But there is some details on the back plates I want to correct. The model won't fit a gunner, I don't thnk it would be possible. I still have to figure out how to finish the rear part of the wings. Any suggestion is welcomed here ! Here are some WIP renders on Stud.io

I Bought the instructions recently and wanted to try the RZ-1 in Phoenix Squadron colors. I also used the mods Gumbinger made. I love it ! Can't wait to build it !

I present you my Imperial TIE/Ln Fighter MOC. It's the final result of years of work and redisigns. The purpose was to made a very detailed MOC, but swooshable, playable and keeping a lot of parts from the set 75211 TIE Fighter to keep the part costs as low as possible. You can see I get some inspirations from other MOC's as Jerac's wing pylones for example ;) https://rebrickable.com/mocs/MOC-42809/Ramses25/tieln-fighter/?inventory=1#comments I don't plan to make money from this MOC, I give the instructions here for free. But if you want to support me and my work, don't hesistate to contact me ! I also designed a TIE Inteceptor and a TIE Striker. Instructions are on the way so stay tuned ! ERRATA : there is two minors mistakes in the instructions. I'm new with this thing ! ^^ : - the X2 logo page 111should be page 104 - the X2 logo page 165 shoud be page 159 Thanks for reading !

Hi ! Just a quick reply to say that those model are simply incredible. I will brick build one for sure in the future ! (First I would love to build a U-Wing) I have just two question : one of the difference between your FO and Imperial TIE are the lenght of the wing pylons. If I'm correct, this is an optical illusion as the difference between the two are not on pylon size but wing size : FO TIE wings are smaller than Imperial ones. At least this is the case for 'canon' size as the Imperial TIE get so many different measures. TIE Comparison Bandai models And a second question that I already asked in another topic : why don't you used the trans red TIE windscreen ? I would give a more distinctive First Order look for this model in my opinion. But overall, I have to say that your model is near perfection and an absolute masterpiece ;)

I know that the grey windscreen piece is Jerac's design choice, I just wonder why no one ever tried the trans red windscreen ;) I would love to see how it looks :)

This one is absolutely beautiful ! But I have one question : why don't you use the red windscreen piece from the official FO TIE Fighter ? It would give it a more distinctive look imo.

Thanks ! They are in old dark grey It looks good too !

Thank you a lot Here is the .lxf file : https://drive.google.com/open?id=1nvD8ma_ExBUka066iSmKQAH2D7_hdy3C Don't hesitate to build some of them for your imperial army ! And if you do so, don't hesitate to share it on this topic ! Personally, I plan to build another one

Hi ! Thanks for your comments Here is the model in real bricks ! For the internal structure, don't worry, I will share the LDD file soon

Thank you a lot Actually the pilot is hold by this part : https://www.bricklink.com/v2/catalog/catalogitem.page?P=93095&name=Panel 1 x 2 x 1 with Rounded Corners and Center Divider&category=[Panel]#T=S&C=11&O={"color":"11","iconly":0} And the neck brackets are here to simulate the pedal

Hi ! Here is my latest creation, a small one : the Imperial Patrol Speeder from the last Star Wars movie : Solo. The aim was to build a narrower speeder than the battlepack one. Also, I made it to be quite swooshable, with more details and able to fit a minifig. Here is some renders of the side and rear. I just have to wait for a small Bricklink order to show you what it looks like in real bricks !

Maybe he has just managed to reverse engineered Anios model.

Hi ! Thanks for your interest in my model ! As I said, I didn't built the bomb compartment as this area is used to put the TIE on a display stand. Unfortunately I will not build it in real brick at the moment as I have a lot of others project in progress. But if you want to give it a try, here is the .lxf file : https://www.dropbox.com/s/fh2ydbbi7avaxgf/TIE Striker.lxf?dl=0 Don't hesitate to give me some feedback ! Thanks ! Ramses25

I planned to start a Crait MOC like this, but you were faster than me ^^ Your trench is very well done and very inspiring, I love the way you built the parapet. Keep the good work ! Ramses25

I can't find it. Someone have a name or something to find it easily ?

New update on the TIE Striker ! I found a solution to connect the grey webbing at the front of the wings. There is no bomb compartment unfortunately... I left the space empty so it will be used to put the model on a stand. Ramses25

Upload directly a LDD file to bricklink doesn't work. I have to make a brickstock part-list before. Ramses25

Here it is : https://www.dropbox.com/s/6ei5z4h1412nxnu/UT-60D U-Wing.lxf?dl=0 You will see that there is a lot of modifications from the original design, especially the wings. I will use the difference between new and used parts to giv the weathered look of the ship. Ramses25

Yes, but Cavegod AT-AT is a little bit taller than minifig scale ;) Ramses25

Hi ! Il love the engines you built on your First Order TIE/Sf ! It will really inspire me to finish my own TIE MOC ;) Thanks for sharing !

Aaah someone finally did it ! Looks great :) Can't wait to see someone building it in real bricks !

It's simply an amazing model of one of my favorite Star Wars ship ! :D If I build this one day, I will mix your model with Psiaki one to build a more swooshable model ;) Thank you ! And keep showing us your amazing models ;)

I won't buy any of these utility belt as the minifig printing do its job pretty well IMO. But those custom arms are amazing and I will buy some of them. And the black skinned pilot head will be perfect for my Barrion Ranner ;)