obijon

So the A in A-Wing stands for Acclamator!

This Rebels thread being dragged up has reminded me that I do need to build a proper Ghost. It was on my list after watching Ahsoka but then Bad Batch Season 3 and Acolyte happened.

The pictures of the Phantom II can be found in this folder: https://bricksafe.com/pages/obijon/reference-pictures All should be self explanatory from these but let me know if you need any help.

Thank you. I do not have time to prepare full instructions I am afraid. The Phantom II is quite a simple build. I still have the model so I can post some exploded pictures of it and all should be crystal clear?

Thank you

Hello everyone! It’s been a while since I posted anything as work and life has been rather busy. I have been building in that time just that not got round to taking photos (bad ones) writing this essay etc. I return with an update of 6 models from Seasons 2 &3 of The Bad Batch. Let’s start with season 2. AT-AC The All Terrain Armored Cannon (AT-AC), was a bipedal walker used by the ground forces of the Galactic Empire during the early Imperial Era. The walker was an early model in the production line that would eventually produce the AT-ST (RoTJ) and AT-DP (Rebels). The front of the head of this walker reminds me of the Imperial Troop Transport. There are no real tricks for this one although I have used the ball joints for the top joint of the legs. I don’t know why I have not used these before on walkers…… Displayed with an Echo minifigure. REMORA The Remora was a transport utilized by Echo during his time with the Clone Underground. The ship was once a mining vessel that had been retrofitted for stealth infiltration, making it ideal for insertion and extraction missions. The high-speed ship was also equipped with a detachable leech vessel (which I have also included). The design of this is based on the Meson Martinet captained by Sidon Ithano and briefly seen in Force Awakens and later in Resistance (I have built that too but that’s for another day). Again, no real tricks for this one, although I like the use of those technic pieces for the engines. A custom Fireball clone figure is used for the display. Now on to Season 3. CX DAGGER VESSEL The CX Dagger vessel was used by the Clone X trooper division of the Galactic Empire in around 18 BBY. It was dagger-shaped and featured twin red-colored engines in the back. A really simple little build. Only little trick is that the dark grey engine section is attached to the rest of the body by the two prongs at the back and is not connected to the large wedges at the front. This was to keep the thickness to a minimum. I am not overly happy with this one but not sure how else to build it in this scale. Displayed with a custom CX Trooper. The helmet is from the General Zod minifigure with the chrome removed using peroxide and then scraped gently with a craft knife. I would rather use official pieces but there was nothing close. IMPERIAL RESEARCH VESSEL This was a type of Imperial transport utilized for the capture, containment and transport of various cloning experiments conducted by the Advanced Science Division. It was manned by Imperial commandos led by Imperial royal guards. One such transport, transport 904, saw its Zillo Beast "Specimen A" escape while traveling in hyperspace forcing it to crash. Another fairly simple build and probably my favourite build of this batch (pun intended). There are a couple of little tricks, like using the door rail plates to fill in gaps when the model goes to 3 studs wide at the front. I also like the use of the horizontal hinge for the bridge at the front. The front prongs are attached using bars and bricks with one stud. Displayed with a custom Dr Hemlock minifigure. No mutilations this time, just labels. ASAJJ VENTRESS’ SHIP The ship had a unique silhouette due to the uneven wings of its fuselage. Outfitted with proton torpedo launchers for escaping dangerous entanglements, the uneven wings on either side of the fuselage cut a silhouette as unique as the ship’s captain. This was a fun build. It was a challenge to keep the wings only two studs high but managed with interlocking parts. The brackets for the engines also helped with the stability. The main trick was for the tie fighter like panels and how to attach them. Took a bit of tinkering but using brackets, clip tiles and plates with handles I finally found something that worked. I also like the use of those tooth pieces for the part of the engines on the wings. Due to the wingspan this model could have seriously got out of hand size wise. Displayed with a custom Ventress figure (all official parts!). PROVIDENCE The Providence was a starship owned by the pirate and treasure hunter Phee Genoa. It has that Star Wars Ugly feel with what is obviously the engine section from an Imperial Shuttle of some sort. Quite a simple build with the tail held together along an umbrella stand bar. The front section is built around brackets. The Phee minifigure for the display is built with all official parts. The hair is from a mini doll. Let me know what you think Cheers, Jon Link to the full Bad Batch Gallery below: https://bricksafe.com/pages/obijon/bad-batch

Hi all Having started to build the Dagger Ship from Bad Batch I need an X Trooper/Assassin for my build display. Any of you minifigure experts got any ideas for the helmet? Cheers Jon

Thanks very much. Here are screenshots of the Wanted List from Bricklink. Should be pretty much complete, may be extras. Enjoy building!

Thanks again.

Thanks both. The size of the model(s) is normally determined by a piece, or pieces, which defines the shape or is central to the design. For the cruiser it was the front section. The front of the cruiser is 4 studs wide and as it is long and thin made it a long model. In general the maximum size is that it has to fit on the stand without looking stupidly large, so a feel.

Hello all I have finally finished my Ahsoka collection after a Bricklink order got lost and I completely messed up another order! Work also took over as it was year end but finally they are done. There are seven models for your visual delight. I will try to keep the descriptions short so if anyone wants to know how certain parts of the models have been built let me know. Now the models, in no particular order……… AHSOKA’S T-6 SHUTTLE I was not going to build this as I had already built a clone wars model which admittedly I did not spend much time on. However, having watched the series I realized that Ahsoka’s shuttle was the signature ship and I needed to do a proper job and I wanted to make the cockpit and engines section rotate together. The ship is built around using a technic liftarm to hold everything together. This allows the ship to be the same top and bottom and also allows the cockpit and engines to rotate. I have also added the extra engine and gun turret. NEW REPUBLIC E-WING Finally this ship is in canon! It was always one of my favourite EU/Legends ships. Simple enough build for anyone that has built an x-wing polybag before! 😊 No real tricks. I do have to admit to using a sticker on the nose. It is an official sticker from one of those Ferrari sets from the petrol station. It just didn’t look quite right being all white. I am surprised LEGO did not release this ship as an official Polybag. ETA-CLASS SHUTTLE Another Clone Wars Era ship brought in to live action. For some reason I never got round to building this before. Maybe there were too many shuttles! A simple little build and I have used click hingers for the wings for those of us that are OCD about having the wings at the same angles! MORGAN ELSBETH’S SHUTTLE Another simple build. The cockpit area was the main problem. The shape is not perfect but I think the use of the wedge pieces was the best compromise. I tried to be clever angling plates but the model would have just become really big with that wingspan. I settled on using dark tan (with some gold pieces) as it is the closest to gold. RP82 FIEND FIGHTER This is probably the most striking model of the collection due to it actually having some colour! I am pleased how this one turned out. It could have been built smaller with a cheese slope as a cockpit but that model would have been tiny. It actually looks bigger in the pictures than it actually is for some reason. The engine parts front and back are attached using 1x2 plates with a wheel pin. 2X4 and 3x6 wedge plates provide the different angles for the wings. SCOUT FIGHTER Obviously a very similar build to the Fiend. The rear section is changed to incorporate the bottom fin and both kinds of 2x4 wedge plates are used for the angles of the wings and the outer parts of the wings on the Fiend removed. I have built a custom HK-87 Droid for the display as there is not a pilot minifigure available. NEW REPUBLIC CRUISER The largest model of the collection and the one that took the most time. This almost got too big for my liking but just about stays within the size I am looking for. The front section is a simple enough build. The rear engine section was far more tricky. The wedge plates have been angled using a combination of bricks with studs on sided and plates. There are 5 engines in a small amount of space. I am not 100% happy with the rear section but it is very difficult when it is only 5 studs wide to get all the angles. Let me know what you think. Jon

MERCENARY SHIP This model again is added here for completeness, Nothing clever really just a flying wing with some greeblies! The engines were the trickiest part and settled for attaching them to 1x1x2 brackets on the plate which holds the whole thing together accross the model. I do like the custom Vect Nokru minifigure. One of my favourites especially as custom figs aren't really my thing. Where possible i want to use an official figure. Hope to have the Ahsoka models done over Christmas....... Jon

FERRIX FERRY SHUTTLE has now been included in the original post

thanks again

Thanks again. LEGO know where to find me 🤣. most of these models on the magazines look like afterthoughts. There has been the odd exception - the last Falcon was good, the turbo tank. If I was paranoid I would think that they copied my design for Reys Speeder from Force Awakens a few years back.