ArtemyZotov

Video review of the MOC

The stickers are done! All the photos can be found here: link

The performance is supposed to be the same as in my Supra with a similar chassis. I will film a video review once the stickers are done and printed.

Hi there! I have designed another Fast and Furious car. This time it's Brian's 1995 Mitsubishi Eclipse from the very first FF movie. Scale: 1:12 Length x Width x Height: 39 x 17 x 11 cm Features: - detachable body - steering wheel connected to the front wheels - spring-loaded doors, bonnet and trunk I used CaDA rims for better looking (the wheels first appeared in C62003W, which was my design). There are 2 versions available. The stickers will be designed later. Rebrickable page (manual version): https://rebrickable.com/mocs/MOC-204070 More photos: https://bricksafe.com/pages/ArtemyZotov/1995-mitsubishi-eclipse/the-fast-and-the-furious

Nope, the suspension hasn't been changed since the release at all. But you are right, the ground clearance on the renders was a bit higher (approx. 1mm). I've just compared it. My mistake in modeling (actually it's quite tricky to model the shocks with proper angle in 3D, as they are compressed in real life at idle position when it's not compressed in the software)

Unfortunately, I stll haven't had those shocks and thus I didn't consider them. But I'm sure there aren't enough room under the front cover to place them because of the little gaps and the suspension adjusting system. Thank you for your feedback! It really inspire me.

The only one brand I gave my permission to sell my MC12 as set is LesDiy (I hope I won't be banned for mentioning it). I'm not sure if they have sub-brands, but I believe the most of those sets you saw are all stolen.

There are no details on that

Thank you! But CaDA rejected this MOC.

Hey there, as you might already know, I released Maserati MC12 last year. But I only managed to publish the video review today (I lacked some white pieces previously) While preparing the video I have updated the gear-shift mechanism, because it caused the turning angle of the front wheel was limited. Scale: 1:8 Length x Width x Height: 63 x 28 x 15 cm Features: - V12 piston engine with rear-wheel drive - 6-speed sequential gearbox + N + R (neutral and 1 rear speed) - steering with working steering wheel - front and rear independent suspension - adjustable front suspension (a real MC12 feature as it has a long front bumper) - doors are supplied with shock absorbers which helps to hold the doors in open/close state. - removable trunk cover and roof You can find more photos on my BrickSafe page https://bricksafe.com/pages/ArtemyZotov/maserati-mc12-18/physical-build

I don't know when it will be released, but I hope it will be this year. I have added motorization support (1 servo + 2 L motors + LED frontlights + LED taillights), changed lights to translucent, changed rims from black to chrome, reinforced roof, A-pillars and rear arches. You can find a photo of updated design on my Instagram.

Hey there~ Long time no see here on Eurobricks. I'm glad to present my first collab project with CaDA - RUF CTR 2017 (1/12 scale)

I asked them and they answered that they ain't interested in this design.

There is no secret, it's an ordinary hinge with one vertical axle of rotating, a L-shape beam just helps limit the opening angle of the door. Thank you all for your kind words!

Hi there, here is my latest build - Brian's Toyota Supra MK IV. Scale: 1:12It has the same scale as 42111 "Dom's Dodge Charger" set Features:- RC controlled (driving and steering)- 2 L-motors for driving- 1 L-motor for steering- Openable doors and hood- Modular building (the chassis and the body are built separately)- Doors are supplied with shock absorbers which helps to hold the doors in open/close state. I recommend to use "BrickController 2" app for better experience. Free stickers are available to download, you can find it on my BrickSafe page. I printed all black logos on transparent self-adhesive film and printed colored prints on white self-adhesive film.

Thanks you all for the kind words! Video is released.

Alternate build of the "10290 Pickup Truck" set.Medium truck UAZ 3303 aka "Tadpole" is one of the legendary Soviet Union cars.The car has been manufactured since 1965. Features:- 1:16 scale- openable doors and trunk- rigid structure- all accessories from the original set was not used, you can put them into the trunk Instructions: Rebrickable

I saw yellowish lime before in reviews, but in my 42115 there are green liftarms... I'm very disappointed( Manufactoring date is 11 2020 https://photos.app.goo.gl/7cQfmypyTSh4qLv2A

@lorenzo_00_h built my RX7 with chrome wheels and black interior details + maximum amount of black pins was used, looks more authentic

I know many people buy chinese brands, so I did a collage with some variations I like white version, but there is no ogirinal LEGO white mudguard for the front wheels.

I know that the engine works not properly, but it is impossible for me to do realistic kinematic in this scale =) I watched your video before, you did a great job, but I wanted to create my own engine.

No, the first photo is the same as video preview... I reloaded it. Thanks all for good words~

Mazda RX-7 VeilSide Fortune from "The Fast And The Furious: Tokyo Drift" Hi all~ My English is not perfect, so I can't write long descriptions and you can find some information below. Scale: 1:8 [1:7,7 is more accurate value] Dimensions: 56x27x15 cm Weight: 2,5 kg Features: - Manual model (No RC and motorized functions) - Working rotary engine in 1:8 scale - 4-speed sequential transmission (one direction shifter: 1>2>3>4>1) - Steering with steering wheel - Full independent suspension (double wishbone) - Modular chassis - Openable doors, trunk and hood - Doors with locks Full photo gallery: https://bricksafe.com/pages/ArtemyZotov/mazda-rx-7-veilside-fortune Instructions: https://rebrickable.com/mocs/MOC-57488 Video:

Hi all I won 42107 set as prize for latest TC18 contest and I'm glad to present my unofficial b-model ot thit set. This is 2020 Ducati Diavel 1260 S Features: - steering - front and rear suspension - working fake v2 piston engine - folding stand Perhaps the instructions are will be available later