n2kar_jw

I will put it next to my Lego P1 from Bruno. Wonder how the Lego Set will compete. Based on panel and part availability, I will also convert the Lego one on Gulf Style :D MCLP1_2 by N2 KAr, auf Flickr MCLP1_1 by N2 KAr, auf Flickr

A little insight on a modification to overcome the missing 10197 Technic Pin Connector Hub with 2 Perpendicular Axles in red: It is used on the rear part of the Engine Cover. -------------------- Here in the first picture, the 10197 is used in orange. The right side is already modded. The modification takes advantage of 44809 Technic Pin Connector Perpendicular 2 x 2 Bent which is available in red. Please note that I have currently only 1x 44809 in red, so i will use a black one for illustration. EC_M1 by N2 KAr, auf Flickr -------------------- EC_M2 by N2 KAr, auf Flickr -------------------- With this design, the red panel 71682 would be loose, the cut a tiny piece of rigid hose and use it fix the assembly EC_M3 by N2 KAr, auf Flickr

Hey All, another masterpiece from LoxLego and I could not resist to build it directly in DBG with the 42156 Peugeot released in Dark Bluish Gray. Some parts needed to be modified with not to much effort, except the engine front cover due to 64394/64680 not existing in DBG. - all 100% Lego - pieces to be replaced for DBG: 63896, 62462, 65304 - using mudguards from 42156 - change all soft axle to black - modifed single frame grill with horizontal lines - 4 Golden Chrome Rings Part 11010 ---- Special Rims by Systemofabrick ---- Hope you enjoy the pictures :D RS6_1 by N2 KAr, auf Flickr RS6_2 by N2 KAr, auf Flickr RS6_3 by N2 KAr, auf Flickr RS6_4 by N2 KAr, auf Flickr RS6_5 by N2 KAr, auf Flickr RS6_6 by N2 KAr, auf Flickr RS6_7 by N2 KAr, auf Flickr RS6_8 by N2 KAr, auf Flickr

Building-Log 7 Hello All, For the Monocoque, there was not so much left, right hand side was to be finished. Adaptions: - cut 5c32 Hose Rigid 3mm for 2x 5L for Step B99 - use 2x 41677 Technic Beam 1 x 2 Thin at B224 & B248 (Cads part not exists in Lego) - use directly panel 64683 & 64391 at steps B232 & B256 instead of 71708 Technic Beam 2 x 3 L-Shape - dont get confused due to Cadas Panel variation Building - Monocoque | Finished Monocoque_11 by N2 KAr, auf Flickr Monocoque_12 by N2 KAr, auf Flickr Monocoque_13 by N2 KAr, auf Flickr

Building-Log 6 Hello All, Continueing with the Seats, as a preheader to the Monocoque Adaptions: The provided Lego Partlist misses some parts here, or at least less quantities. You can find a picture of all required parts for the 2 seats below. - e.g. plate 3623 must be 2 instead of 1, plate with hole 18677 must be 4 instead of 2 - use 8x red 32828 Plate Round 1 x 1 as indicated in the pictures from T-Lego (I used black and it does not have so much negative effect) - replace technix pin 1/2 at steps 153 / 162 with 39888 Technic Pin Long to provide friction for the 65578 Bar, Angled with Stud on End - 65578 Bar, Angled with Stud on End is only available in transparent for Lego purists Building - Seats | Finished Unbenannt by N2 KAr, auf Flickr Seat by N2 KAr, auf Flickr

Building-Log 5 Hello All, aftter a break due to another Lego project, I resumed the LaFerrari. In the meantime, Cada has uploaded all the PDF instructions and it seems also incoorperated the corrections. Therefore, I will change a little bit the approach using the PDF Files instead of the YouTubes Videos and try to adapt here and there where the Lego Model is different. I made progress though different modules of the LaFarreri, and will go in chronological order through the building, presenting the final submodels. The Cockpit and the Frontaxle is done, pictures below and some parts that are requiered to attach the gauge cluster are described. Changing Gears, steering and hight adjustment works perfectly fine. Fun part of the section was submodel from Step 89, which finally leads to small panel 22 come below the big panel, finetuning the look of the interior. Adaptions: For the original gauge cluster: - Step 98: Do not attach the 1x5 Beam in front of the steering wheel - Step 99/100: Prior to attach the 1x15 beam, concentrate to assembly the different parts of the gauge cluster, using: 2x 60483 x 1x 6536 attached to the axle 55013. - attach both sides of 90640 with an assembly of 36840+3024, attached to 60483 - use for the center part with the black bush red pin 89678, because it provides friction - Step 154 does not work for me, it does not hold to the bar of 85940 - changed the direction with the half part to the bar - Step 159: the technic gears used (black and tan) match with the Lego Partlist, but in the picture shared by T-Lego, blue gears were used Building - Section Cockpit and Front Axle | Finished A5 by N2 KAr, auf Flickr A6 by N2 KAr, auf Flickr A7 by N2 KAr, auf Flickr A8 by N2 KAr, auf Flickr

T-Lego shared the Lego Partlist earlier in this Thread on page 2. Using only original Lego Parts, you cant build the Model in yellow.... There a number of parts which are (currently) not available such as 2x5 Ellipse Thick (80286) or the mudguards 69911 and more... Other items which may be replaced like Pins 22961 or 44874.... I think yellow is a fantastic color for the Model, but difficult with the part share for 1:8 Technic Supercars.... I experienced the same with Loxlegos F12, which was possible to build, but some parts really hard to get. Cheers

Building-Log 4 Hello All, I have switched back to the Monocoque to finialize prior to building and integrating the seats. Such a cool module, I like the side fairing very much and representing the overall segmet seems to be nailed compared to the original model. Parts: - According to the partlist, rare 3x 4519 black axle (3L) is required - two of them will be used here to attach the 61070 / 61071 panel mudguards (Cada uses LBG here) - by the way, the 61071 / 71 panels which have been released in black in 3 sets back in 2014/2015 are excellent choosen and brilliant integrated! So cool :) - difficult here and there to convert from Cada panels and building approaches - still need to cut the black rigid hose for the roof connection of the panels and 1x3 thin beam Building - Monocoque | 2 I had some problems to attach 43712 (Black Wedge Curved) in the Center bach Interior. I added two 3713 technic bushes to perfectly align it in the center and finally pushed the black brick 32064 with in Axle from behind a little forward to attach the 43712 part. Monocoque_10 by N2 KAr, auf Flickr Without the Cada Instructions available, i was forced to guess a little here and there, as the youtube videos did not provide full details. I believe, I matched it closely enough :) Monocoque_8 by N2 KAr, auf Flickr Monocoque_9 by N2 KAr, auf Flickr Seats will follow in a different module as I still struggle to get red 1x11.5 beam.... To be continued....

Building-Log 3 Hello All, yesterday, I jumped over to the Doors for an evening/night session, thought i can finish it in one shot - took some more time, but now, left door is finished. Incredible Module, a dozen out of the box solution, really tough to finish - outstanding result! Biggest impact during converting into Lego are the differences in the panels. Parts: Replacing: - 42924 3L Blue Pin against Black Version (2x) on top red beam for visual clean [no black 3L Pins in the partlist] - Replacing 4274 LBG Pin against Red Version keeping the Red Bionicle (48267) in place - Replacing 27940 Pin with 2 Axle from DBG into black on inside part of the door [27940 is new since the Daytona (4x), quite expensive at Bricklink Remarks: - Red Wing 61800 from Lego seems to vary compared to the Cada Version - Running Short of black bushes 62462, but maybe i did an error during part collection @T Lego @LvdH Not sure if the one red panel is hold by a 45590 Technic Axle Connector Double Flexible [Rubber], at least there is no one in the lego partlist - maybe you can comment / still remember Door_Question by N2 KAr, auf Flickr Building - Doors | 1 r_Door_outside by N2 KAr, auf Flickr r-Door_inside by N2 KAr, auf Flickr

Building-Log 2 Hello All, after a long week, I diceded to give a break to the cockpit, starting with the monocoque. It looked to me a ltittle bit more straight forward and easier to build. Parts: There seem to be not so much differences from the CADA Parts, except for the standard 64782 Black Panel. - I use blue 3L connectors 42924 and bue 2L with axle joint 43093, while it is sometime difficult to difference the 43093 to the standard 2L Pin in the CADA build for rebuilding - For 4185 Technic Wegde Belt, please consider the correct orientation when installed, otherwise the 22961 Pin Connector with Axle will not fit. - can someone tell me where 15071 Weapon Gun is used? - I assumed it will be used in the center handle, but it seems it is 85940 double bar.... - i will need to put some more intention to the roof, in some areas it seems that cutted hose rigid is used to hold the panels and the 3x 60483 1x2 Beam with axle hole Building - Monocoque | 1 Monocoque_1 by N2 KAr, auf Flickr Monocoque_2 by N2 KAr, auf Flickr Monocoque_3 by N2 KAr, auf Flickr Monocoque_4 by N2 KAr, auf Flickr Monocoque_5 by N2 KAr, auf Flickr Monocoque_6 by N2 KAr, auf Flickr Monocoque_7 by N2 KAr, auf Flickr I think there is red interior missing in the CADA build between the air vents. To be continued....

You are right, it is not in the picture.. However, it is part of the original Partlist, so I wonder where the Nr.1 Connector in yellow is used in a another location...

Sneak Preview on the Lego Gauge Cluster Gauge 2 by Jo W, auf Flickr Gauge_1 by Jo W, auf Flickr :) I will check and come back to this topic Nr1Conector to MiniLa by Jo W, auf Flickr That was my Basline to build - how is it looking on your model? I have the impression that i can only switch to 4 gears with this design

Thanks for your nice words - not sure if it was a smart choice to start this project :D Thanks you - Starting the build now, i can not even imagine all the efforts you put in the build - really crazy! and thanks for the gauge cluster, parts are here, will try to achieve it! Just a short update: A_3 by Jo W, auf Flickr A_4 by Jo W, auf Flickr Gears stuck from time to time, I think i need to adjust them further - still happy to achieve in first iteration Special thanks to Blbills for his support!

Thanks for your offer :) I have a certain amount of spare parts, and also using a spare Daytona, Sian, McLaren F1 and Volvo Hauler (which were used also for other projects) To give a rough overview: Brickling Orders: 167€ Ebay for the Quad: 10€ Lego B&P: 136€ That ends up to ~ 313€ on top of the spare models BR

Building-Log 1 Hello All, after finishing Loxlegos F40 i will start a new project, building the LaFerrari with Lego Bricks in red. I havent got either the Cada Set nor an Instruction Paper / PDF, so I will use different youtube videos, the pictures here from the Forum and Thijs fixes V2.2. Youtube Sources: https://www.youtube.com/@schorni https://www.youtube.com/@der_technic_fan/videos Parts: I used the Lego Partlist that was distrbuted earlier here and put some effort in to order all missing parts. Here some experience: - Parts 32294 (Wishbone) & 32126 (toggle joint) are quite expensive in red - i will use them in black and check if it is to much compromise at the end - 44809 (Pin Connector Perpendicular 2 x 2 Bent) has been released in the mustang and is cheaper on Lego B&P than on bricklink - 32063 (Technix beam thin) in red was recently used in 42145 Airbus Helicopter and is much cheaper on Lego B&P than on bricklink - For mudguards 61070 & 61071 I bought a used 42034 Quad on Ebay - 58176 Light Cover with bar in yellow is used in the knob wheel and can be replaced by another color (yellow was only released in set 41386 with a quantity of one) - black figure covers 90639 and 90640 seem not to be used in the Cada Model on the dashboard Some of the part orders from Lego B&P "standard" have shipping time up to 2 month - were still missing, i used a temporary color change just to understand the building and will be replaced by the correct color later. Building - Section Cockpit and Front Axle | 1 Just Started: At the beginnig, a Cada Stand alone part is used to connect to black 44809 connectors. According to the pictures on page one, I identify it is replaced in the Lego Version by 2x 65487, 2x 24326 and 1x32034. A_2 by Jo W, auf Flickr A_1 by Jo W, auf Flickr to be continued... PS. My Lego 488 Pista in white/dark blue from Bruno is waiting another Cada Model with Lego bricks :) 20210302_153237 by Jo W, auf Flickr