THIS IS THE TEST SITE OF EUROBRICKS!
1gor
Eurobricks Grand Dukes
-
Joined
-
Last visited
Everything posted by 1gor
-
1gor replied to efferman's post in a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling@vascolp after several months of experimenting and testing, I came with this final solution for narrow axle using reduction hubs: Yellow 5 studs axles at the back are inteded to hold ball yoint But since Lego battery boxes are to weak to power my buggy motor, I'll probably use it with PF large motors for propulsion...at least PF servo works with coupled large motors... -
1gor replied to msk6003's post in a topic in LEGO Technic, Mindstorms, Model Team and Scale ModelingThat is why I prefer review by @kbalage or @Sariel because they always show new or onteresti g parts on their reviews
-
Is it possible to put new suspension arm (the one that holds rear axle from above) over light bluish frame 7 x 5? Thanks in adwance
-
1gor replied to gyenesvi's post in a topic in LEGO Technic, Mindstorms, Model Team and Scale ModelingOn my models axles are robust, so it could be great (but first need to find out exact dimemsions.
-
1gor replied to Ngoc Nguyen's post in a topic in LEGO Technic, Mindstorms, Model Team and Scale ModelingWhen I get my paws at it I could test something that is buggling my mind since reduction hubs are introduced to Lego Technic. So P1 has plenty of (hopefull) pleasant surprizes for me...
-
1gor replied to gyenesvi's post in a topic in LEGO Technic, Mindstorms, Model Team and Scale ModelingI needed such part a while ago to make stiffer (but at the same time narrower) chassis where live axles would be attached...
-
1gor replied to Ngoc Nguyen's post in a topic in LEGO Technic, Mindstorms, Model Team and Scale ModelingI suppose you are refering to Z shaped piece to the right in early post3d image where 2 new susprmsion armes are separated and clearly visible..
-
1gor replied to gyenesvi's post in a topic in LEGO Technic, Mindstorms, Model Team and Scale ModelingInteresting part beside new susension arm in McLaren is Z shaped liftarm... You can see it at the right side on image of incomplete McLaren tpgether with two new suspension arms... https://www.jb-spielwaren.de/en/lego-42172-mclaren-p1-v8-twin-turbochargers/a-42172/ ...penultimate image in gallery... Or is it better to transfer this post in general parts discussion? @Milan do what you think that is more apropriate...
-
1gor replied to Ngoc Nguyen's post in a topic in LEGO Technic, Mindstorms, Model Team and Scale ModelingWidth is OK; it goes arround differential, but to mount it is enough to have one stud (lets say with pinhole) and it could have been in green why not (there is John Deere license)
-
1gor replied to Divitis's post in a topic in LEGO Technic, Mindstorms, Model Team and Scale ModelingActually I don't care a lot about modern cars because they get broken more often than classic cars and I like design of some classic cars... That's all...
-
1gor replied to Ngoc Nguyen's post in a topic in LEGO Technic, Mindstorms, Model Team and Scale ModelingAnd there seems to be a new suspension arm... Too late; please ignore... I hope that differential could fit inside... ...to make narrow suspension... Actually it is very wide...
-
1gor replied to falconluan's post in a topic in LEGO Technic, Mindstorms, Model Team and Scale ModelingCurrently I'm testing this prototype... If I managed to make steering with powerfunctions medium motor, then I can use buggy motor instead of large motors...
-
1gor replied to Ngoc Nguyen's post in a topic in LEGO Technic, Mindstorms, Model Team and Scale ModelingAnd I was hoping for new kind of flip flop beam. Thank you
-
1gor replied to Ngoc Nguyen's post in a topic in LEGO Technic, Mindstorms, Model Team and Scale ModelingWhat is that part with perpendicular axle hole (like on 7L gear rack only in light bluish gray) in the middle of differntial housing at both side
-
G wagon with low profile tires is actually stylish as posted Xerion. Excelent comparisson @AVCampos
-
1gor replied to falconluan's post in a topic in LEGO Technic, Mindstorms, Model Team and Scale ModelingYes it is; a kind of evolution. Major evolution for me was to find out (the hard way) that every PF V2 receiver (I have 4 of them) works on one chanel with following coupled motor(s) combination: - 2 x PF large + Servo or - 2 x PF XL × PF large or medium (won't work with Servo) (Even Buggy motor works fine on one channel and Medium motor on another for steering) ...when I use train battery box or rechargible battery box because I have no space... I would gladly help when I can
-
1gor replied to falconluan's post in a topic in LEGO Technic, Mindstorms, Model Team and Scale ModelingLooking at 2023 Magnum 400, upper hood line is best simulated with curved 3 x 13 panel (like I made on latest Fastrac incarnation...)
-
You are right, they are smooth, so older with smaller turning angle... Rear is solid axle.
-
To make 31 mm wide, TLC should develop new rim, since thid 56mm medium wheels are 34mm wide
-
Perhaps they put the ones in front introduced with Audi because they have bigger steering angle ...and it have double shocks at the front...we saw that before (somewhere )
-
When you zoom this image you can see 87.9 x 36 writting on tire...so it is new tire that follows philosophy introduced with Audi...
-
G300D W460 short wheelbase is IMHO best G class ever (my wife had it as used car and even today we can not forgive ourselves that we got influenced by economical / ecclogy friendly smaller car...and spld it )
-
Hmmm... The day after tomorrow; should be interesting...
-
1gor replied to falconluan's post in a topic in LEGO Technic, Mindstorms, Model Team and Scale ModelingPerhaps this hood idea could help you (very vrry similar slope...)
-
It looks like 87.9 x 36 tires...
Sponsored Links