THIS IS THE TEST SITE OF EUROBRICKS!
Search the Community
Showing results for tags '2-4-4'.
Found 2 results
-
(Built and designed for my father, not for me) The Disneyland engines with consists in order from Left to Right: 4-4-0 "C.K. Holliday" (engine 1) from 1955 pulling the my semi-fictionalized version of the Retlaw 2 freight train 4-4-0 "E.P. Ripley" (engine 2) also from '55 is pulling the post-1971 fictionalized Retlaw 1 passenger train 2-4-4 "Fred Gurley" (engine 3) started service in 1958 and is pulling the Holliday Blue excursion train 2-4-0 "Ernest S. Marsh" (engine 4) began service in 1959. Most of the 4-4-0 models use 9v motors, as my father has that system as his preferred train propulsion type... and GatewayLUG uses the 9v style-track / motors too, so it makes it runnable at shows. The Fred Gurley is not able to be powered this way, sadly. C.K. Holliday 4-4-0 and Retlaw 2 freight train There were two trains at Disneyland opening day in 1955, and these were the Retlaw series. Retlaw 1 was the passenger train which was pulled by E.P. Ripley and consisted of one baggage, four passenger cars, and the observation car. Five of which are no longer used or were sold. (but the observation car is still used - as the Lilly Belle parlor car as seen in the official set) Retlaw 2 was the freight train, pulled by the engine as shown above - C.K. Holliday - and consisted of three cattle cars and three gondolas, plus the caboose. As you may have noticed, I chose to only use two cattle cars from that train, and no low-side gondolas... There are no pictures of those as far as I can tell before the freight cars were all converted into another train type, the same as are in LEGO set 71044. The tanker car and coal hopper are my own invention. The two cattle cars. The two doors on each side of the identical cattle cars fold down. The roof sections come of now as well. As you can see, no seats are inside these cars as there were none installed in Retlaw 2 on opening day 1955! The two gondolas have been shortened from the original versions on the original Retlaw 2, but they are pretty close to it in looks! The caboose. I made up this car, as I couldn't get the real four-world axle caboose to look good in LEGO. The caboose has a removable roof too. E.P. Ripley 4-4-0 and Retlaw 1 passenger train (fictional post-'71 rebuild) Retlaw 1 was the passenger train which consisted of one baggage, four passenger cars, and the observation car, which were pulled by E.P. Ripley on opening day in 1955. Five of which are no longer used or were sold. (but the observation car is still used - as the Lilly Belle parlor car as seen in the official set) However, in this fictional revised version of the train, this retirement didn't happen, though they were modified to suit side-seating. The real Retlaw 1 was originally a yellow painted train, featuring front facing seats until it was mostly retired in 1971. The observation car of Retlaw 1 then became a parlor car known as the Lilly Belle after Walt Disney's wife Lillian. This fictionalized train is in the revised, post-1971 color scheme of the Lilly Belle, (which is in set 71044) and also has two passenger cars plus a baggage car with opening side doors. These cars all have side facing seats, as if Retlaw 1 were around and used in modified format after the 1971 overhaul of the Lilly Belle. As a side note, each of the cars feature a removable wall for getting at the inside details, as in set 71044. My revised version of @TJJohn12's MOC of the Disneyland number 2 steam loco. I made it using parts ordered by my father, but it's still missing the 9v motor in this picture. As you can see, the loco is mainly dark blue, as it swapped colors with the originally dark green real-world engine. This is because the C. K. Holliday model in the Disney train Lego set is also color swapped, from what should be dark blue to dark green. So, basically, Lego used bits from both engines for the set, and we continued this trend here. The baggage car features two sliding doors in red, though other colors are an option to stand out more. (I prefer black doors, but that's not prototypical!) The side wall comes off, as it does on all the cars, to reveal seating. In this car, that means luggage room and two seats. The two coaches are identical in every way, and are also quite similar to the parlor car at first glance. The inside features side seating, as in the Disneyland park... this also allows for easier moving of figures, and placing them in any of the five seats per car. This car is in the LEGO set 71044, but I thought you guys would like to see it alongside everything else. Fred Gurley 2-4-4 and Holliday Blue excursion train The Holiday Blue train was added in early1966 to replace the original Retlaw 1 passenger train which was going to be being pulled from service due to slow loading / unloading at stations. (It is also notable as the last consist added to the Disneyland Railroad.) Here it is being pulled by the Fred Gurley, also known as Disneyland number 3. Here is my Dad's (now finished IRL!) third Disneyland loco, to accompany the C.K. Holliday one in set 71044 and the E.P. Ripley MOC I just finished for him: it mimics the real world Fred Gurley pretty well too. The real 2-4-4 loco has been at Disneyland since early March of 1958. This paint scheme isn't 100% accurate (black boiler / black domes are dark green / red here), but IT IS in line with the modification my Dad and I have already done to the other locomotives. The roof lifts up as normal for this series. This loco is one of my Dad's few unpowered engines, as it is impossible to fit a 9v motor underneath... or any motor block, really! The "Holiday Blue" car by themselves, with only tail-lights added to them. The Disney train my father bought has added three Bricklinked cars with some new cartoon passengers courtesy of "The Minifig Shop" LEGO resale store in Kirkwood, Missouri. Still need get the 4th car and the Lilly Belle car built from the actual set, and add the Star Wars characters to it and the empty one on the right. I should probably put Donald Duck as a he fireman as seen in the cartoon short 'Out of Scale" from the late 1950s. Ernest S. Marsh 2-4-0 Just to complete the first four locomotives from Disneyland, here is Ernest S. Marsh. It's a 2-4-0 based off the 1871 Denver & Rio Grande loco number 1, "Montezuma" and was readied for service at the California park for the first time in late April 1959. This LEGO version is also inspired by LEGO set 71044 for the two-axle tender, piston design, and general look of the engine, while the boiler design originally hails from set 7597. The tender is powered by a 9v motor, and weighed down for traction by a standard weight brick. Notes on the post and future additions: Real life pictures will be added whenever possible. Also, Disneyland RR Number 5 - Ward Kimball - is a relative newcomer to he park and is a 2-4-4 like the Fred Gurley. It would not be interesting to have two more identical locos on the roster, so it is not included, and as it arrived in 2005, it's not quite from for the time period my dad and I are attempting to model. (He is kind of not sure if he wants another loco after Fred Gurley, so the 2-4-0 steamer Ernest S. Marsh might not get built either!) Any questions, suggestions, or complaints? Let me know below! EDITED 8/26/21: added Fred Gurley (Disneyland number 3) steam loco's real world MOC pictures to this post! -
This long journey started in November 2021 with a used copy of Toy Story 3 set 7597 - Western Train Chase - bought from a local Lego resale shop here in St. Louis. I quickly expanded the loco to have a tender, then working pistons, and finally rolling stock. I was then inspired by the original 1955 engines from Disneyland for a second coal-burning loco, (the C.P. Jupiter and U.P. 119 from the Last Spike Ceremony of 1869 was also an inspiration!) and then awhile later a 4-2-4T styled after the C.P. Huntington. (This became a 2-4-4T last December.) The 4-10-0 was originally 8-wide, and was built before I got the 7597 set in August 2021. I never liked it in eight wide, (I never even photographed it in that form) and when I was taking apart all my eight wide MOCs recently, I took pity on it and converted it into 6 wide to preserve it. Then, I took photos of all the locos... I still haven't finished some of the freight cars, so the rolling stock will be added later. (I promise it won't be three more years!) All rolling stock added 6/1/24! The trains all together, minus the rolling stock. This 4-4-0 pulls my passenger train This was the first engine finished. Rear of loco No. 1. It's styled as a mid-to-late 1860's wood burning loco. You could also say it is likened to the Jupiter and the Gov. Stanford of Central Pacific Railroad fame. The passenger cars were styled after three sources: the one in set 7597 - Western Train Chase, set 10015 - Passenger Wagon, and the Disneyland and Santa Fe 'Retlaw 1' MOC's made by @TJJohn12. This is my coal burning 4-4-0 (numbered 8), and pulls my railroad executive's train. The front of the coal-burning locomotive. This MOC is modeled after a early-to-mid 1870s loco, but it could be considered to partially resemble the Union Pacific 119 from the Last Spike ceremony of 1869. The combination baggage / sleeper car is for my railway executive's train. This car's purpose and paint scheme is actually inspired by a car owned by the (fictional) Wasatch and Nevada Railroad in the 1975 Western / thriller 'Breakheart Pass', based off the novel of the same name by Alistair MacLean. This private car was based off the same source material as the tan sleeper / baggage car, which is the film Breakheart Pass. In the film, the car was named 'Fairchild', after the fictional Nevada Governor played by Richard Crenna in the film. As to why Abraham Lincoln is standing at the back of the car even though he is actually long dead by the 1870's, I have but one answer: because it looks cool to have him there! The 2-4-4 tank engine I'm using as a switcher, and is seen here moving a cut of freight cars. In my fictional backstory I wrote, loco No. 4 was originally a 0-4-4 Forney loco that soon needed a leading two wheel pony truck to operate better at speed and keep wear down on the front set of driving wheels. Of course, in reality, it was first built as a 4-2-4T like the C.P. Huntington you can still see in the California State RR Museum, or at you local Zoo / amusement park, as smaller-scale replicas are made by Chance Rides for places like that. This coal-hauling hopper car was modified from 2007 set 10183 - Hobby Trains - specifically, it was alt model 28 - Gondola. The tanker car you see was inspired by part of the 1997 set 2126 - Train Cars. This green boxcar was taken directly from 2011 set 3677 - Red Cargo Train. The caboose was inspired by set 10014 - Caboose - and set 7597 - Western Train Chase. This monster of a steam engine hauls my freight train. This loco (No. 3) is modeled after the only 4-10-0 to ever run on US Rails. This, of course, was the 1883-vintage El Gobernador. (Spanish for "the Governor") The real locomotive was a colossal failure, but this one is (in my fictional backstory) built from the plans with the mistakes corrected, making the loco a good drag-freight engine. The rear of the engine, with it's tender being two studs longer than the others. The cannons on this flat car were inspired by 2013 Lone Ranger set 79106 - Calvary Builder Set. This drop-side gondola was inspired by the one in 2022 set 60336 - Freight Train. This red boxcar was lifted from 2006 set 7898 - Cargo Train Deluxe. The caboose was inspired by set 10014 - Caboose - and set 7597 - Western Train Chase, but done in yellow instead. ...I just realized these locos are almost all modeled after CP engines! This was totally accidental, and wasn't noticed until I made this thread. Anyway, that's all I got. Comments, questions, and other things like that are welcome!
