THIS IS THE TEST SITE OF EUROBRICKS!
Search the Community
Showing results for tags 'Makuta'.
Found 17 results
-
It's my MOC of Makuta in his Mask Maker form. Let me know what you think about it... And yeah, the minifig is supposed to be me.
-
My first entry for the ongoing Bionicle contest, also known under the WIP name, "Destroyer God Makuta." Never before have I built a MOC this huge (totaling 618 pieces and approximately twice the height of either of the other models I made), especially not in LDD, so building this was an interesting experience for me- in particular, having to work with LDD's often-uncooperative hinge tools. Entry page here. "This form of Makuta is not the form he takes to fight the Toa heroes. No, this form is the one Makuta takes when he has won. The last remaining members of the tribes of Okoto have expended all of their resources to stop this shadowy overlord and failed, and it has come at a great cost: the world is now barren and lifeless. Alone to rule over an empty, desolate world, Makuta wanders the planet in despair, having discarded the Mask of Ultimate Power, which is now useless to him." Fitting for such a grim alternate-universe scenario, Makuta uses primarily dark colors with the notable exception of his chest piece, which is meant to bring to mind some sort of area of high elemental energy concentration (imagine Makuta firing a laser out of there or something, hence the rather open chest that somewhat resembles a futuristic weapon system). Although the articulation of the legs at the hips would likely be somewhat stiff and quite limited, there is some degree of side-to-side motion of the upper body (to an extent which I can't really guess) thanks to a simple gear/turntable system; of note, the way the extenders are integrated into the body was inspired by the torso of ddeklerk's recent WIP, "Lockdown," and in fact part of the reason why I decided this MOC had to be so huge in the first place, and because of this, there should be at least some leniency for waist articulation, unless I'm greatly underestimating the friction of the ball joints on the ends of those pieces. This model can indeed hold the included staff, albeit not in a position like this, which involves some careful angle manipulation and the removal and addition of one or two pieces. Due to the aforementioned clumsiness of LDD's hinge tools and their interactions with Technic and CCBS pieces, this is the most visually appealing pose I could take of this feature. I hope you enjoyed this MOC.
-
LEGO was kind enough to provide us with detailed models of the JTO model so that it should be easy enough to build it now; at some point I might myself go and create step-by-step instructions, but this will more than suffice. On my Flickr Courtesy of LEGO (obviously), credit to the designers: Nicolaas Vás (Brickthing), Corvin Stichert (Vezok's Friend) and Niek van Slagmaat (who I believe took the photos, so an extra thanks!) Sorry if this does actually belong on the contest page, but I felt at some point this was a big enough issue on its own =)
-
Hello, This is my entry to the Bionicle Makuta Build contest: Close-ups: Vs Ekimu: Here's my entry's page if you like to check it out: Click here
-
As you may have guessed by now, this is my first entry for the Rebrick Makuta Contest. My Makuta build itself was feeling a little "typical" with its small Toa size, simple build, and typical Makuta colors. To rectify this though, I had the vision of giving Makuta a vehicle of some sort, and he ended up with a Chariot that cobbled together a multitude of G1 and Technic pieces. Including a few G1 pieces alongside the CCBS parts was one of my building goals. I also built my first proper photo set up for the contest to get proper pictures. Unfortunately even then my build was to big to get a horizontal angled shot with a proper full white backdrop... I am considering a few more entries for the contest, but I fear that going bigger will just ruin my chance to use the photo booth I just barely built! Yes as I said before, my Makuta is actually just Toa sized, sharing a lot with the 2015 Toa. I like his look, but he doesn't seem as 'flashy' as some of the other contest entries. His reserved design though was intentionally done though to make him look like a "What Could have Been" Makuta retail set. Can you spot the G1 pieces? I am digging the ease of posebility in the smaller figure though! Try doing this with your monster sized titan! While the Skullie is a little cliche, I am in love with the greebled garbled look of the chariot. The Old G1 pieces really help create an 'underworld' look that I don't know if it could be achieved as easily with CCBS. For the most part this MOC is actually a combiner model, using pieces from Mask Maker vs. Skull Grinder, Umarak the Hunter, Onua Master of Earth, Pohatu Master of Stone, Skull Warrior, and the classic Vezon and Fenrahk. The wheels and plates on the chariot come from a Technic Off Road Crawler, and the G1 Manas set. You might notice I am using a hidden leg to support the chariot rather than place pressure on the wheels. The wheels can hold the model, but for static display I prefer to use the 'kickstand' leg. The chariot also has some spots to mount G2 masks on it, as if Makuta is hauling away the masks of his victims... I hope you enjoyed my entry. I am highly considering a few more Makuta builds so time will tell if I end up having quite the 'Makuta Club' to enter this contest! Thanks for looking! Please visit the actual contest entry here: http://www.lego.com/...sortEntry=false
-
[Flickr Album] Throughout his incarnations, Makuta has always been a failed ruler, secretly coveting the admiration he was never qualified to receive. Here, he has succeeded; King Makuta, fierce defender of the people of Okoto, even at the small expense of their liberty. Freedom is a dangerous thing. Kneel to the crown. Been working on this guy for about a month for the Rebrick contest (technically I had a head start, but I'm going on vacation, so sue me =P). Haven't MoC'd with physical bricks since... 2010, I want to say, so a solid six years. Before CCBS. Pretty pleased with how it turned out, all things considered; there's stuff I could blather on about, but my favorite part is the crown, which was the original design impetus and took a while to get right, but just clicked in the end. Criticism, questions, critiques, etc. always welcome. Yes my photography is atrocious.
-
This is my take on Ekimu and Makuta. Both share nearly the exact same build. Rather than using Ekimu's build from 2015. I went with a similar but more animation accurate design and built a custom gearbox for them. Ekimu has green eyes and Makuta has red eyes. This is cause there are no purple eyes yet and both sets of eyes contrast against there trans colors. I've made Makuta's gear function swing his left arm as in the legend video. Makuta was shown holding his hammer in his left hand. Makuta also has the same shield as Ekimu as I couldn't think of anything else to give to his other hand. With that out of the way here are pictures of the brothers Ekimu http://www.brickshel...tors/ekimu1.jpg http://www.brickshel...tors/ekimu2.jpg http://www.brickshel...tors/ekimu3.jpg http://www.brickshel...tors/ekimu4.jpg Makuta http://www.brickshel...ors/makuta1.jpg http://www.brickshel...ors/makuta2.jpg http://www.brickshel...ors/makuta3.jpg http://www.brickshel...ors/makuta4.jpg Together http://www.brickshel...uandmakuta1.jpg http://www.brickshel...uandmakuta2.jpg Comments and criticism appreciated
-
Makuta Takarrah by Artemiy Karpinskiy, on Flickr Takarrah is an OC of a Tumblr user makutatakarrah. She is a Makuta that came to be during the war with the League of Six Kingdoms. Takarrah is a kind and caring type, unlike most of her brothers and sisters, and was not supportive of Teridax's plans, following him only because she couldn't oppose him. After Makuta was defeated, Takarrah have migrated on Spherus Magna along with other ex-inhabitants of Matoran Universe. Takarrah specializes in Avian Rahi, however her current projects are aimed towards Visorak and development of Hordika anti-venom.
-
Seeing as JTO Makuta was a combiner model. I thought I'd take a crack at making a Makuta that used soley pieces from the purple sets. The sets used in this combiner are Protector of Earth Onua Master of Earth Skull Basher Terak Creature of Earth Onua Uniter of Earth Quake Beast Mask of Control from Umarak the Hunter. With that out of the way here are the pictures http://www.brickshel...or_makuta_1.jpg http://www.brickshel...or_makuta_2.jpg http://www.brickshel...or_makuta_3.jpg http://www.brickshel...or_makuta_4.jpg http://www.brickshel...or_makuta_5.jpg http://www.brickshel...or_makuta_6.jpg Comments and criticism appreciated
-
Hello! I would like to show you my own vision of the Fallen Mask Maker (pictures are clickable). In this design I wanted to include elements of Aztec and Mayan cultures. And my Makuta looks like the Gods or shamans of those times (Horned Helmet, Scull Amulet (hi, Scull Creatures!) and etc). Additionaly the Herald of Solar Eclipse have any elements of the Okotan culture (Golden Armor, elemental crystal Hammer, etc). As other Masters of Elements, Makuta has his own elemental creature, Kraven (from "Kra-" (matoran stem "elemental shadow") and "raven"). Thanks for taking a look and may shadow be with you!
-
Coming in at over 600 pieces (approximately 85% CCBS, 12.5% Technic and 2.5% System) and 55 cm (1 foot 10 inches) tall is my Makuta contest entry! He features two sets of wings, a Mask of Ultimate Power with adjustable facial expressions, a traditional villainous cape, ten tentacular tendrils and the stability of a Hero Factory 2.0 figure. Furthermore, his 70 cm (2 feet 4 inches) wingspan can fold up behind his cape to act as an extension of said cape. As you can see, he towers over any other CCBS figure. Even Grievous only comes up to his waist. Anyway, his gallery contains many more pictures showing off his various features.
-
Hi Eurobricks! For your information : Feel free to share. Exo-6 BIONIFIGS Founder -
A shadow has risen...
-
^ CLICK THE IMAGE ABOVE TO VIEW THE FLICKR GALLERY ^ Rurmuax was a Makuta who watched over one of the Southern Islands long before the Great Cataclysm. At a certain point a while before Teridax's takeover of the Brotherhood, Rurmuax was hunted down by a group of Toa. One of the Toa spotted the Makuta and wildly activated his Zatth, but unluckily for all involved, the nearest Rahi were a large troop of Visorak, which the summoning Toa could not control. The Toa were all killed by the Visorak, but Rurmuax was stunned before he could use any of his powers, and subsequently captured. He was mutated and unable to shapeshift, and although he did retain many of his original powers, they were greatly limited. Additionally, Rurmuax's sanity degraded quite rapidly. He was last known to be aimlessly roaming the Southern Islands. This is, in my opinion, one of my best MOCs. Feedback is most certainly appreciated.
-
Hello, ladies and gentlemen. Today I wanna show u my MOC for some contest. The idea of this contest was smth like "build smth like Makuta's equipment", so I decided to build a well-known Antidermis Vat (a place, where the spirit of Teridax situated, when he had no physical body, only smth like green substation). So u can see it. =^__^= Preview photo: All photos are here: http://www.brickshelf.com/cgi-bin/gallery.cgi?f=522189 Hope u enjoy this MOC. =)
-
Haven't touched LDD in a while, but then I was watching Mask of Light again and I noticed how much Makuta's feet looked like the Ben 10 block feet. So, this came about. 1 2 3 4 (new) Download the .lxf file for better views. Wings because wings rule.
-
This is a MOC I made years ago, circa 2012 if I recall. It's been tweaked and improved bit-by-by ever since. I've posted it on another non-Lego forum but I'd like to share and "archive" it somewhere Lego-related. :3 What started as a simple revamp of the 2003 titan quickly became much, much more. First it was a revamp, then it was a "toa-sized" Inika clone, which grew to a similarly-built shadow counterpart to 2008 Takanuva, and eventually this unique build which is not only bigger than Takanuva, but its so large it barely fits in my lightbox when crouched. (the second pic is actually just the torso, no legs so I could get a close-up on the detail) In fatc the only parts is really share with Takanuva are the hands kinda. It also has a staff that won't fit in either, but it's basically his old staff with Brutaka swords replacing the Takanuva staff blades, and said blades relocated to the bottom and the actual staff part covered with gunmetal tubes so it's not a twig in his hands. I wish I could amke stuff like this all the time, but this sucker also ate pretty much all my parts. (I am pondering a Sidorak revamp in this style, however, despite not owning the set. Much smaller of course :p) Thanks for looking!
