THIS IS THE TEST SITE OF EUROBRICKS!
Search the Community
Showing results for tags 'Mecha'.
-
My first build on this site. Inspired by Mech Warrior.
-
M:Tron time! So, I made a mecha freely inspired by GUNDAMs (not rigorously at all, proportions are off) and more specifically the ones designed by Matt 0ne whom I thank for his help and advice with this, as well as for letting me take inspiration from his (awesome) LDD models. This is the MAGNUD : Mechanical Armored Giant with Nuclear Unobtainium Drive. While a defensive unit, like the Asteroid Field Recon Voyager, it's also used for any other task. Recently nicknamed Lucy, apparently something about the picture above. I was particularly curious about the feasability of a mecha at this scale. And more precisely if it would collapse under its weight or not. Well, the answer is: possible, but finding the right balance can take a few seconds. It has a cockpit and a pilot. Nothing complicated to keep it as light as possible. You can have an idea of its scale with this picture (look at the hand). It has retractable missile launchers... And railguns. It can easily be given fairly natural poses thanks to a number of joints. And it has wings and reactors because... because it's easier to make it fly than walk. The bottom of the legs are in two separate parts to increase stability and solidity. And it's really a poser, that's almost annoying sometimes. It'd better stop with that behaviour. Its eyes are phosphorescent, and of course, like any good M:Tron, it glows under the black light. There, hope you liked it.
-
One year before I built a G1 Optimus Prime but it could not be transformed. This time I re-build it again and now it can be fully tranformed with out taking out any parts. Hope you all like my creation. Last Optimus Prime MOC: https://www.facebook...45470942&type=3 Since there are too many photos, you can find more photos in https://www.facebook...45470942&type=3
-
A MOC that I made during the past summer. *Sniff* Bye bye warm weather... Anyways though, I just thought that i would like to share this creation with you guys, and I hope that you enjoy it as much as I did making it. Backstory: Britain had been bombed enough to know that regular warehouses couldn't hold their valuable mechs or supplies. So they had to build underground bunkers, or hangers. Mecha Hanger 5 is one of these buildings, and is built 50 meters below the earth. These hangers are safest from some of the the even most powerful of bombs. Mecha Hanger 5 is primarily used to house the Liberator B-15 mechs, and the recently developed "Flying Flapjack" Z-66. Each base has high security, and only authorized personnel are allowed to work in these hangers. More pictures via the link: Thank you for viewing my creation, and have a good day!
-
MR1 is a walker specially designed for the world championship of quadrupeds in Orion-3. MR1 Walker by FonsoSac, en Flickr The championship dates back to the early colonies that were established in the system. The lack of roads and the need to travel long distances to attend exomushrooms plantations, popularized the use of quadrupeds walkers vehicles. Soon farmers began making races between them and bet money and land. It was especially important the race at annual mushroom's fair in the city of Novaathens MR1 Walker by FonsoSac, en Flickr MR1 Walker by FonsoSac, en Flickr MR1 Walker by FonsoSac, en Flickr The races take place in rough terrain where walkers can exceed speeds of 130 km/h. These speeds can be achieved thanks to the terrain analysis and stabilization CPUs which avoid obstacles and should try to avoid falling correcting movements of the walker. Although accidents are not as frequent as in the origins of the sport still happens with injuries of all kinds to the pilots. MR1 Walker by FonsoSac, en Flickr C&C is welcome as always.
-
... IN THE GREEN CORNER! While 'some' corporations feel that top-heavy, spindly-legged mechs somehow gives then an unfair advantage ; ), others believe that those legs are going to get kicked out from under them when they face the brute-force, mecha-muscle approach of new M.A.N.T.I.S. entry... TIPTOE! Special move: Bunneeeeee! Tiptoe undergoes pre-match scrutineering:
-
After Defeating the Metal Gear Rex, Snake was finally able to relax for a while, and help out his Diamond Dog partners. Little did he Know, Ocelot was working on a smaller but more powerful Metal Gear, named after the small particle, that could be formed to make anything you could imagine; the BRICK. Luckily, Snake had the Diamond Dog's helicopter to help him out. The fight wouldn't be easy, though, because the Metal Gear Brick could pack a whole lot of fire power. Hear are some other scale comparisons and minifig lineups. The metal gear itself, though not based off of any from the games, largely takes inspiration from the Zeke. The helicopter is based of the ones from Metal Gear Solid 5, but uses a dome element so I could include the transit screen Easter egg from an Ultra Agents set. Snake fits inside very well. But it's hard getting him in. And hear you can see the control panel of the Metal Gear. Hope you enjoyed this build! Stay safe, Th3_Br1ck_Kid
-
NEW from Llwyngwril Systems: an innovative high speed solution to all of your rough terrain personal transport problems! Bug Runner by David Roberts, on Flickr Bug Runner Film by David Roberts, on Flickr I hope that this little MOC contains enough Technic and isn't too silly for this forum. On a vaguely serious engineering note; I'd be very interested in any suggestions that experienced Technic builders might have for replacing the cams that I've used. They're 1x2 45deg slope bricks. After long-term use, they detach from the Technic connectors with studs that attach them to the big gear. I'd like to build a motorised model using this technique but the current cams won't sustain it. Any ideas please? -
Need I say more......? If you like classic space please consider voting for my Lego Ideas set: https://ideas.lego.com/projects/140905 Apparently size does matter by billyburg, on Flickr
-
This time I used the parts from MIXLES 41560-62 to build this yellow mecha. Hope you all like it!
-
So, for a long time, there had been discussion about making a dragon for Macy here on the Eurobricks forums. I decided to see what I could do. Once I had figured out how to make the mace tail, it started to progress rather quickly, with the head and the main body being finished at the same time, after which it stalled while I tried to figure out the wings. Finally, though, it's done. This beast has 1400+ pieces, and is fully buildable. I expect the real life version to be done sometime in the summer. So here it is, Sir Chompsalot: Side view and size comparison: As you can see here, the legs have a great range of motion (using an internal gearing mechanism for friction), and the tail can be swung using the gear on the back. The little chest holds ammo for the two turrets. The mace tail tip is built around a LEGO Games die piece. The wing-rotors are built in more or less the same manner as the wheels of Jestro's Evil Mobile, and have a good range of motion. Two little blasters on the sides provide covering fire, and aerial assaults are handled by the dual six-stud shooters, which are mounted on turntables on castle turret pieces and can be manned by squirebots. As you can see here, Macy can sit either in the cockpit or stand on the dragon's head. Either place has storage for her mace and shield. Both the upper and the lower jaws of the dragon can move, and in general are supposed to resemble some kind of trash compactor. The forehead can hold a nexo power and the throat has a space to attach 2x2 round bricks for a flame/heat ray effect. The eyes are supposed to resemble giant versions of those the squirebots have. Back view Gallery LXF File (once public) Comments and criticism appreciated!
-
I thought she deserved a vehicle of her own, but I couldn't really think of many vehicles that'd be useful for a spy, so I decided to go for the classics and build a mini-mecha. To access the mecha's interior, the hood folds up and the chest folds down. Since her Ultimate's main power is beetle bomb, I gave her a little pet beetle. It could be a plushie, but that'd make the launcher completely inexplicable, rather than merely mostly inexplicable. Sadly, I couldn't figure out a way to give it three pairs of legs rather than two. Thoughts? The red light inside the hood is supposed to represent some kind of heat ray device. The tr. red tiles are a stand-in for a Nexo Power shield inlay. When I build it in real life, I'm planning to replace the assembly connecting that little grappling hook to the rest of the mech with a stud launcher. Gallery. Comments and criticism appreciated!
-
GN-003 Gundam Kyrios by Artemiy Karpinskiy, on Flickr This is Gundam Kyrios, from Gundam 00 anime show. In the show, Kyrios is lightning-fast transforming Gundam, his alt form being a fighter jet. The MOC, however, lacks the transformation function.
-
This robot is my first MOC in 2016. It's an alternate building from the 2016 newest creator set 31044. Hope you all love it!!
-
I wanted to build a better suit of armor for Macy than the ultimate version, and...it kind of just snowballed from there. Features include an opening cockpit, full articulation, rotating dual mace, dual blasters (can be activated via gears) and a brickbuilt shield that can hold a minifig shield. I also replicated her ponytail. When I initially built this and took pictures of it, I slightly underestimated the size of this piece (used in the shield), which LDD doesn't have and I, as such, represented with a Nexo Knights cockpit piece. It's an easy fix, though, requiring simply that I replace the 2x4 slopes with 2x3 ones. Gallery Comments and criticism appreciated!
-
This is my first LEGO car transformer. 31007 is a good set for building transformer and mecha. The concept of my car creation is based on the Batman Tumbler. It's east to transform to robot. Hope you all like it. Start to transform~~
-
All are complete sets of 3, except the red. I was unable to find the red bird one. Used the fire for hair on the red. Really wanted the gray to be bulkier, but ran out of parts. I really like how the orange turned out. Had the most difficulty with blue and brown because of fewer joints.
-
////WARNING///// Boss class enemy approaching ////WARNING//// So, there's been sort of a Giant robot craze, because of the contest on BZP. I decided to go along with it and build my own. I'm really fond of how the exaggerated proportions and colors turned out. Anyway, comments are greatly appreciated, thanks!
-
Not sure if anyone else has seen this movie, but it is fantastic and I wanted to do a build inspired by it immediately after I watched it. I'm not completely satisfied with the Mimic (pics of them are extraordinarily hard to find online), but I really like how the Newjackets (exoskeletons) turned out. Overview of the MOC. From the rear. Close-up of Rita, the Angel of Verdun (Emily Blunt). Close-up of Cage (Tom Cruise).
-
Searing red As always, no real back story to this guy, I just wanted to build something dynamic with loads of red. The Carapace opens up in the back to reveal a jet thruster as you can see on the pictures. The finished product kind of reminded me of something you'd get as an enemy in some Japanese shmup or something so I looked up a cool sounding phrase and the name stuck. I really like the contrast of the tiny skinny frame and limbs against the big hollow shell. So yeah, your comments and criticism is welcome, as always.
-
I tried to build an alternate MOC by just using the parts of 31034. The idea is based on the Japanese Animation "Macross". I took few days to finish it because I did not have any idea. It can be transformed into plane, semi-robot mode and robot mode. Hope you all like it. Semi Robot Mode Ready to transform
-
A frame from some test footage of the LEGO DC/Marvel Crossover that I've been developing for almost a year. And yes, it does transform into a Batmobile. A small sample of it in action can be viewed during the credits . I'll have new photos/videos up later this year on the facebook page.Thanks for looking!
-
This is my another creation of transformer - Megatron. Again it cannot be transformed. Hope you all like it.
-
Hi All, I just used 41533-41535 to build this weird mecha. There are less than 200 parts from these 3 bags. It's a bit diffcult to build it but I really enjoy! Hope you all like my creation!
-
Gallery: https://www.flickr.com/photos/128941361@N03/sets/72157648782827273/ Front: https://www.flickr.com/photos/128941361@N03/16496533008/in/album-72157648782827273/ Side 1: https://www.flickr.com/photos/128941361@N03/16061787844/in/album-72157648782827273/ Side 2: https://www.flickr.com/photos/128941361@N03/16496536548/in/album-72157648782827273/ Back: https://www.flickr.com/photos/128941361@N03/16476838757/in/album-72157648782827273/ Back unconcealed: https://www.flickr.com/photos/128941361@N03/16061790214/in/album-72157648782827273/ Protector of Time: https://www.flickr.com/photos/128941361@N03/16496725220/in/album-72157648782827273/ In the mystical island of Okoto, before the six elemental heroes were summoned to protect islanders, they had their own hero. Vahi, the Protector of Time, who used to guard the legendary Mask of Time found a suit of armor from a past time which granted him immense power. He dubbed it, "Tengen Toppa Goruden Toa" which means "Heaven-Piercing Golden Warrior" in the ancient Okotese language. He has since left the Mask of Time in the hands of other Protectors and left Okoto to pierce his fate and save a universe trapped in an endless cycle of violence. His last words to the Protector of Fire, who questioned his decision were, "Of course I must leave! Who the Karzahni do you think I am? Mine are the spear, flamethrower and blaster that will pierce the heavens and fined the mythical being Mata Nui. Farewell, brother. Do not believe in the Vahi that believes in you, or the you that believes in Vahi, but the you that believes in you." After that, the other Protectors never saw Vahi again, though they can sometimes hear the sound his finishing move, Giga Spear Slash.
