THIS IS THE TEST SITE OF EUROBRICKS!
Search the Community
Showing results for tags 'architecture'.
-
Greetings! I have recently took upon myself the task of recreating one of my favourite buildings lost to the ravages of war: St. Alexander's Church in Warsaw, Poland. It's quite an ambitious project (over 20,000 bricks) that I intend to finish by October. Background information: The church was completed in 1825 and was built in the neoclassical style. In the 1890s, the Russians, who occupied Poland, decided to remodel the building architecturally and expand it considerably. The temple was practically intact following the German invasion of Poland in 1939, and was almost completely razed to the ground as part of the planned destruction of Warsaw in late 1944 (only one of the bell towers survived). After the war, the church was rebuilt, however in its original form, not the one after the 1890 alteration (probably due to a combination of insufficient funding and the opposition to the Church by the new communist regime). My aim was to rebuild the church as it stood between 1890 and 1944. Notes on the build: Dimensions: the building itself measures 132cm x 76cm x 54cm (the build is situated on a 2x4 grid of 48x48 baseplates) Many people may be annoyed by this, but I decided not to build the interior for two reasons; one is practical, the other is technical. As for practicality, I came up with an idea to insert some LED lighting into the church so that it can be illuminated, which should combine beautifully with the trans-coloured bricks that make up the stained glass windows. Inserting a power source, wiring, lights, controlled, etc. may have been problematic with a completed interior. Regarding technicality, I conducted a lot of photographic research before designing the model in Studio. While pictures of the exterior are not difficult to come by (owing to the fact that the church was one of the architectural crown jewels of pre-war Warsaw), I had only found one of the interior, and the quality of it was insufficient to provide an appropriate representation of the interior. Although written accounts of the interior do exist, I wanted to stay true to the original. Granted, one cannot replicate everything in Lego (especially me, a mediocre builder at best), but I didn't want my imagination to taint the build. Photos of the actual church: (The church after being destroyed. Notice the one surviving bell tower. The bricks you can see in the foreground came from the church and were used to build other buildings for the returning population following their expulsion after the failure of the Warsaw Uprising). Renders: Note: the renders aren't complete, primarily because of technical limitations. I'm running an Intel i7 with a GTX 1080 and even that setup struggles sometimes. Also, the angles of the build make working in Studio annoying at times. Some elements that I wanted to put Studio considers as colliding with others (particularly when it comes to the dome), so I've decided to just do them in real life instead. These include the top of the dome, the roofing adjacent to the dome base, the statues on the roof, and some minor details here and there. The greatest challenge will be the walls of the dome; as you can see they're empty, and I may have to resort to non-Lego means. Building: More to follow! Most of the workpace is dictated by how fast the BrickLink orders arrive at my place.
-
After taking some time off from Moccing, it's finally time to present my latest MOC! This modular building represents a traditional small german brewery as you can still find them in a lot of villages and towns all over the country - a village brewery, or "Dorfbrauerei" in german :). The brewery features the various tanks and coops required for the brewing process, a small bar/restaurant and a cosy beer garden outside - where a mighty old tree offers welcome shade in the summer time! The MOC sits on a 32x32 baseplate and is fully modular. Despite its rather small size, it consists of almost 3000 pieces - around 600 alone were required to build the tree! Let me take you on a quick tour through and around the building - more pictures can be found on flickr The attic. The annex with the brewery itself features fully brick-built windows. When the tree is otherwise occupied, you can get a better view of the facade facing the beer garden ;) Hope my 'small' MOC brings you as much joy as it brought me when building it! Cheers, Tobias
-
Magical. That's what the House of the Five Senses is to me. [MOC] House of the Five Senses by Bert Van Raemdonck, on Flickr The House of the Five Senses is the entrance to the Efteling theme park, which I have the fondest memories of. I still try to trick my parents into taking me there. We never visited Disneyland or even Legoland () even though I'm a big fan. But still, that was never a problem to me because we would often visit the Efteling, which is such a magical, whimsical, fun and genuine place that it totally made up for not visiting those other theme parks. The mere sight of the Efteling's entrance therefore gives me warm feelings. That made it the perfect fit for the latest (and last) contest on Rebrick, "Architecture faves", which called on builders to recreate a place close to their hearts in Architecture style. That and the fact that it's just a super interesting structure to recreate with a fascinating story: [MOC] House of the Five Senses - Everything you need to know by Bert Van Raemdonck, on Flickr Its distinct visual style and defining compound curves made it very challenging to replicate in bricks though, especially at the Architecture scale. My first instinct was to use many bows, cylinders and cones. Turns out that there is a severe lack of cone pieces in reddish brown (and it's only one single set which provides the brown carrots that work perfectly as the peaks...). I had to resort to using slopes and flat parts, and in the end I'm very glad I had to. Using bow pieces would have been a mistake as the main shape of the surface has a concave surface, while the concave bows would have destroyed the flow of that surface. Moreover, it would have been impossible to hide every single half stud lip of a brick or to align everything perfectly, so the angular bricks make those features look more intentional and part of the creation. So strangely, using slopes instead of bows actually results in a visually smoother build and also gives strong, crisp edges where they need to be. [MOC] House of the Five Senses - Dragon Perspective by Bert Van Raemdonck, on Flickr The downside was that I had to create the surface out of a multitude of small pieces at just the right angle instead of using bigger pieces with inherent curvature. That meant I had to find a lot of compact ways to connect things at funny angles and do my best to fill up all gaps. New parts like all the 1x1 pieces with bars in different configurations were absolute life savers to get it to work. Without them, it also wouldn't have been possible to connect the triangular panels that were the only right part for the job in several places. The disadvantage was that all of the complex connections needed a lot of tweaking just to get the part not to collide with others. This being built with Lego Digital Designer, you can understand the struggle of taking half an hour just to line all of the parts up, just to come to the conclusion that it sticks out too much and you have to figure out a completely new solution, or that the collision box of the part is ill defined so it refuses to put the part in place even though there's no collision in real life... Sure, building digitally has a lot of advantages (and no, I didn't use part-colour combos that don't exist as far as I know), but there are some definite disadvantages like spending ages on lining up parts, wishing you could use the illegal connections everybody uses or struggling to understand compled 3D orientations on a screen... Anyway, the small rant being over , believe it or not, in the end I managed to create the building entirely with legal connections as far as LDD is concerned. [MOC] House of the Five Senses - Leaving perspective... by Bert Van Raemdonck, on Flickr In the end, I'm very happy with the final appearance of the building on its own and the fact that it matches the original building quite closely (look here for some excellent reference pictures). I'm especially happy that I took the extra trouble to angle the four peaks of the main part of the building which makes it both accurate and gives it a very dynamic look for a static piece of architecture. To complement the spiky look of the building, I opted for a presentation on an unconventional base placed at a 45 degree angle which emphasized its corners. It has the extra advantage of representing the triangular square (now that's a funny turn of phrase ) in front of the real building, which features a fishbone pattern in the floor which I tried to replicate with the tiles (until I realized I totally missed the point of the pattern, but it still looked good enough ). The very new 2x2 triangular tiles in the end enabled my vision of an angled base, but sadly I had to use some loose parts to fill in some funny gaps. Still, I think it was totally worth it for the presentation. Finally, it was very fun to add all of the little elements like the trees, hedges, lightposts and flowers that breathe some life and colour into the scene like the seasoning in a dish. [MOC] House of the Five Senses - Group perspective by Bert Van Raemdonck, on Flickr In the end, I'm very happy with the visual result. Also with the fact that I pushed myself to tackle such a challenging topic and persisted through the entire building process which took an entire month even though the model only counts eight to nine hundred pieces (I often went days with only placing ten bricks or something like that...), because through it I learned some new techniques and part combinations (triangular flag element + 1x1 round place with bar at the bottom = total win!) which will certainly be handy in the future. And what made it truly special was the feedback I got. I has already been very fun to see Efteling fans react to my model. And I am very grateful that the judges of the Rebrick competition liked it enough to designate me as a runner up winner... The House of the Five Senses certainly has worked his magic on me once more! If it only puts a little bit more magic on your day as well, that'd be just perfect. So I hope you enjoy it, and don't forget to keep your eyes open to see magical things! ____________ So, I mentioned this was built with LDD, which means that I can also easily share the file with you, just in case you're interested in the techniques or would like to try to build your own. As I said, all the parts (at least the most important ones I checked) are available in the colours I used, and everything is connected, although I don't promise it will be a creation you can swoosh around - if that is something you'd want to do with a building. However, the design presented in the renders isn't horribly practical. The base, for example, would take in more depth than needed on a shelf, limiting the display options. The angled base also requires some loose parts and the new 2x2 triangular tile in grey, which have only appeared in the roller coaster set so are on the rare side. That's why I've also designed a version with a rectangular base, which should be a lot easier to build and manage in real life. It doesn't have the tirangular square in front, but it does have more vegetation in a corner. I also got rid of the loose white jumper plates at the base of the back tower. I couldn't find a solution during the time frame of the contest, but after a lot of thinking I've now designed an alternative with car doors which are all firmly attached. Both versions of the model are included in the file below, so you can check out the one that suits you best. Have fun with it, and if somebody does succeed in building it in real life, be sure to send me a picture, and don't hesitate to ask questions because I still have some designer notes! The LDD file: https://bricksafe.com/files/BEAVeR/digital-models/efteling_buildable.lxf
-
The queen of Karak Izûm, Hild Firemane remembers every grudge. And every grudge will be settled. The town Izium was occupied and destroyed by orcs. It was finally liberated on September 10th 2022.
-
Our party of adventures is ambushed by some goblins who were lurking in the dark. Dungeons & Goblins by Ids de Jong, on Flickr Dungeons & Goblins - backside by Ids de Jong, on Flickr -- Build for the Summer Joust 2024 Stairway Tales category.
-
Founded in 1912, St. John's College is the oldest residential hall in the University of Hong Kong. I lived there in the early 1990s and by that time the third wing did not exist. Thus it did not appear in this build. IMG_5272 by skcheung730, 於 Flickr IMG_5273 by skcheung730, 於 Flickr IMG_5274 by skcheung730, 於 Flickr IMG_5276 by skcheung730, 於 Flickr IMG_5275 by skcheung730, 於 Flickr IMG_5290 by skcheung730, 於 Flickr IMG_5289 by skcheung730, 於 Flickr 5000691 by skcheung730, 於 Flickr -
Hi guys, Here's my latest MOC - Grand Central Terminal! Hope you enjoy the detail jam-packed into this MOC. It's up on Ideas. Dozens of photos and a time lapse video here Grand Central Terminal on IDEAS. PS - Why is the max total size for an image upload set at 100KB??? At that limit, I can barely get one thumbnail in.
-
Imagine: you're busy building on a new project, and you're almost finished.... then someone with the same idea goes all over the internet with his building. That's not funny! (sh*t happens ) It didn't hold me back of completing my version of: The Chanel Boutique in Amsterdam! It's located in the P.C. Hooftstraat: the well known street of only expensive shops. My version is very accurate: the size of the windows, the amount of windows and the height are all precise. The most extraordinary thing about this building is that it is made completely out of glass: the bricks, the doors, window sills, window frames and even the doorhandles... erverything is crystal clear glass! That explains the official name of this building: The Crystal Houses designed by Dutch architect office MVRDV. The glass bricks gradually go over in the famous Dutch bricks you see everywhere used in Amsterdam's canal houses. The glass bricks are an invention of the Technical University of Delft. I started building this last december... and no: I didn't count the trans-clear plates! Check: Flickr > BrickShelf > Creating the Crystal Houses (in Dutch)
-
Hey guys, I decided to create this topic and the main idea came from this and this post (so special thanks to @danth and @Digger of Bricks!). I would like to highlight three things before I start to post inspirational MOCs: I’ll post three staff picks everyday! Please feel free to post your favorite MOCs! Have fun admiring and taking inspiration from those great MOCs Top three MOC’s IMO in Baroque architecture: 1. This incredible Baroque Church by @Jellyeater! 2. This amazingly detailed MOC by @pj_bosman! 3. This greatly shaped modular by @cimddwc! Here are the three best Baroque MOC’s IMO! What do you think about them? Would you buy modulars like those if TLG made? Here are the Steampunk ones: 1. This incredible layout made together by @castor-troy and @domino39 (they also made one MOD of the PR and the MS and two MOD’s of the CC included in this layout. But they look so different that they are more MOC then MOD). EB topic here and Flickr albums with more photos here, here, here and here. 2. These great Steampunk modulars by @adde51! 3. These very interesting modulars by @Zilmrud who as well made great MOD’s of the PC and the BB! Here are the three most gorgeous Steampunk MOC’s IMO! What do you think of them? Would you buy modulars like those if TLG ever made?
-
Hello gyus, we would like to present to you our microscale model of world famous Taj Mahal in India. Model is done in aprox. 1:650 scale with cca. 1400 pcs. It was designed as a part of microscale city project of czech RLUG Kostky.org. We hope you like our model. If you do please suppor it on Lego Ideas: https://ideas.lego.com/projects/95511b44-5e11-4fcc-9efc-240109bf4876/comments_tab Thank you!
-
I'd like to present a small scale version of the Solomon R. Guggenheim Museum in New York City respectively of its (newer) LEGO rendition in the set 21035. My micro model is half the size and uses 228 pieces (vs. 744). Its similar in size to the old LEGO version (21004) but more detailed thanks to new parts and colors. This design is a small counterpart to its bigger and much more complex sibling I presented a few months ago, the Guggenheim Museum in Bilbao. If you are interested in instructions for these and other models you can make a find on my web site (http://www.thilo-schoen.de/lego.html). Hope you like it!
-
I had the pleasure of building and reviewing a new custom LEGO Architecture set which was created to commemorate the 75th anniversary of Capitol Records. The kit is designed by Adam Ward, a talented LEGO artist who does commissioned work, and works at Bricksburg on the LEGO movies. 'Capitol Records Tower' by Adam Ward. 642 Pieces, 200$, Capitol Records Tower is an iconic round tower in Hollywood, California. Many people believe that the circular design is meant to evoke the appearance of a stack of records, but this is just a happy coincidence; the architect proposed the round shape to reduce the building’s construction costs and air conditioning needs. Capitol Records Tower, 1956, in Hollywood, California, by Louis Naidorf / Welton Becket and Associates. (Photo JCS, CC-BY-SA-3.0)This is a custom kit containing real LEGO bricks, four stickers, one custom LEGO compatible part, and a high quality box and manual. The packaging is faithful to both the quality and styling of the official LEGO Architecture kits. (Do be careful with the custom part—it is very thin and more brittle than regular LEGO parts... I broke 1/2cm off the tip by accident.)High quality instruction manual, glossy stickers, and a promotional card included.The model is built on a sturdy base measured 16x24 studs, similar in size to other LEGO Architecture sets with a similar number of pieces. The instruction manual is extremely high quality, and almost all of the steps are clear and easy to follow. I did encounter a couple steps which were slightly confusing, but nothing too difficult to figure out.The corner panels need to be slid in from the top. This is a very good set that captures the spirit of this iconic landmark pretty well. This is especially challenging because round shapes are notoriously difficult to re-create using LEGO. The finished model looks great, especially after applying the stickers (which are very effective at reinforcing the building’s identity.) I do wonder if it’s possible to make the tower appear more round without making the model larger by using more than 8 panels. (At least in theory, you could create a model with 14 sides instead of 8 sides while preserving the existing diameter of 28 studs.) The finished model looks great! I enjoyed building this kit; it is was pleasure to step inside the mind of a talented LEGO artist with a different building style than the official sets. I was impressed to see that this kit is comparable in quality to the earlier LEGO Architecture sets, and only slightly less detailed than current sets like the revised Guggenheim Museum building. This set is recommended for people who already have all of the official LEGO Architecture sets, or people who have a connection with Los Angeles. It's available for purchase for 200$.NOTE: This review was a generous excerpt of the in-depth review posted on my website. To read a longer version of this article with more photos, visit: http://brickarchitect.com/2018/capitol-records-tower-review/ Disclaimer: The kit was provided by Adam/Capitol Records for this review, but my opinions are strictly my own.
-
Hi, I want to show you the renders of my new creation inspired by the skyline series and some creations I found online. Now the project is on Lego Ideas. https://ideas.lego.com/projects/f564dbfd-905f-461a-8f1b-cd7031b16395 Thank You Original design: Springfield Skyline_Epanded_01 by Matteo M, on Flickr LEGo Springfield Skyline 04 by Matteo M, on Flickr Springfield Skyline_Epanded_03 by Matteo M, on Flickr Springfield Skyline_Epanded_02 by Matteo M, on Flickr -
Hello all. I've finally completed my last build of the year with Kahuka's Koffee. A building influenced predominantly by neo-classical architecture. It has taken about 3 months to complete. I've wanted to try my hand at more varied styles of architecture. It's been 4 years since I last had a go at a classical style. The problem I find with this style is that it tends to be all one or very few colours and it makes picking out details more difficult so I've opted to vary the colours of floors and put highlights in where I could. I wanted to include a rounded roof mainly to finally use the PAB cup full of 1x4 slopes in black I got a while back. I also was keen to incorporate balconies and many arches - common in classical architecture. There is an interior but only for the ground level floor (Said here in the UK), but I've not chosen to build upper floors as it would take too long and frankly I just didn't have enough plates to build another 5 floors If you're wondering why it's called Kahuka's Koffee, there is a subtle hint of the Islanders theme in the facade. I've included a slightly updated version of my streamlined delivery van which I made some years ago to give some busyness feeling to the street. Anyway here's all 9 pics; If you wish to view them at flickr my stream is here: https://www.flickr.com/photos/52656812@N04/ If you have any questions about techniques I used or any comments please feel free. Cheers!
-
Greetings! LEGO Research Labs 62000-brick commercial complex featuring offices & laboratories, various function, service & utility areas, stairwells, elevators, gardens, and parking for 106 cars plus additional spaces for motorbikes and bicycles. More pictures: https://www.flickr.com/photos/71148741@N05/sets/72157691350419425 Slideshow / Zooms:
-
Dear architecture and LEGO enthusiasts, I would like to propose you a LEGO Architecture challenge. Every week I will come up with a brief assignment, that connects LEGO and architecture and if you want, you can react to it and post photos of your creations. I hope you will have fun building experience. 1. Challenge Do the model of building in 3 different scales, start with a very small scale, just a few bricks. Then do the same building in larger scale with more details. And finally, the biggest model, with even more details. Example:
-
This was built for a college assignment, where we had to make some sort of visual art. Of course I chose to do something with LEGO, and used it as an opportunity to recreate Chartres Cathedral. The Abbey of St. Piat was not included in my rendition. It took 16 hours to complete, and weighs 4.6 pounds. This is my first cathedral, and it was quite a fun project. You can see more pictures on brickbuilt. Thanks for looking, feedback always appreciated
-
Fill 'er up! My latest build is a jump into the glory days of gas stations, when full service and free oil changes were the rule and the local station was a gathering place for neighbors. My brick-built gas station is inspired to the Shell one located in Tucson (Arizona) and it’s packed with every details you’d expect to find. It showcases an elegant Art Déco architecture completed with curved corners, a tower in the middle, a red outline all around the station and the inevitable Shell writing on top. The build is three in one: the diner on the left, the garage/workshop on the right and the fully-equipped store located in the middle of the building. A look at the back of the station reveals the three locations with many details and the different characters. Outside there are two period gas pump with a beautiful Lego shell on top under a curved canopy. All around you can find tanks, signs, tyres and other stuff. To complete the work I've built a red stepside pick-up truck, a tan Hot Rod and a reddish-brown roadster with some troubles (it's housed in the garage indeed). It was on my wishlist long since and finally I've found the time to built it as I had in my mind. I'm sorry for posting my gas station here with a little delay Thanks for stopping by. More pics and info: flickr
-
Hallo, I've made some digital inspirations for future project of our LUG - MicroCITY. Inspiration comes from existing blocks of flats built in our city in 1950s, modified and adjusted to fit in modules of 32x32 baseplates. Built in LDD, rendered in Bluerender.
-
Hi guys, i hope i'm posting in the right place. I'm new here. This is a Game of thrones MOC, might be consider as an architecture set maybe. Any advise is welcome. I know for sure that i have to do better rendering. Castles of Westeros by Davide Sacramati, on Flickr More pictures on Flickr https://www.flickr.com/photos/155731276@N06/albums
-
This is a quick MOC, a Lego custom build of Toronto, a city with a very fascinating skyline. All the buildings are to scale relative to each other. From left to right is the First Canadian Place, Toronto City Hall, CN Tower, Rogers Centre, and Royal Ontario Museum. It's my first microscale build.
-
I've built almost every set in the LEGO Architecture series, and I'm always excited when a new set is available for the first time. While I really enjoy the variety that the new "Skylines" sets have added to the Architecture range, I don't like that we haven't been seeing quite as many sets based on a single standalone buildings since they were introduced. That's why I was pleased to here that we would be getting three new standalone models this year. I admit that I was a bit underwhelmed with the photos of the Arc de Triomphe set when they were released - I didn't like that intricate carved details were reduced to a single statuette.OVERVIEW:The model contains 386 pieces, and has an MSRP of 39.99$. (This seems too expensive since it contains small and basic parts, and we have been seeing well under .08 cents per piece in recent additions to the Architecture series.)BUILD: I built about half of the model using only the photo on the front of the box. I was unable to complete the model in this way for two reasons... 1) There is an error in the photo on the front of the box. 2) There is a lot of clever SNOT construction techniques used in the upper half of the model.Before getting into the details of the mistake on the cover and in the instructions, I do want to call out a few of the more interesting techniques. The arches slide over the 'Carved' sections containing the statues, which are offset from the rest of the model.I like how you assemble the panels containing the statue which are 1/2 stud offset from the base as a single assembly. This makes the construction process simpler. Assembling the top section of the corniced roof.I also liked seeing how the final level of the roof came together. Brackets and headlight bricks are used to good effect to ensure everything lines up correctly.THE MISTAKE:When trying to build a model using only the photo on the cover, it's critical that the model was assembled correctly before taking the photos. There should be a gray plate beneath the white plate in the tiny sliver of the photo which you can see behind the archway. The same error is reflected in the instruction booklet. They ask you to assemble four identical modules and attach them to the baseplate built on previous steps. The module which goes in the rear-left corner is shown without the layer of gray plate on the bottom. (My guess is the software they use to design the instructions doesn't prevent you from placing one brick on top of another - the module was probably copy/pasted and accidentally pushed one plate too deep.) As you can see, the left module is missing the gray plate. To be fair, it's not a major mistake in the instructions, and people who follow the instructions closely probably won't notice this mistake as they would simply snap all four modules into place as indicated.Closing Thoughts:I have enjoyed visiting Paris, and I agree that the Arc de Triomphe is an important landmark and a great example of Neoclassical architecture. Unfortunately, this is not my favorite recent addition to the LEGO Architecture series (especially since most of the recent sets have been excellent.) I would have liked to see them make the model a little larger so they could have included additional detail in the carved panels surrounding the building. Further, the set is overpriced at 39.99$ for less than 400 pieces. To make matters worse, the set doesn't include any especially large or interesting parts to add to your collection. If you can find it for a steep discount, it's not a bad model, but I'd strongly recommend other models in the series (Louvre, US Capitol, etc...) if you haven't tried them already.What do you think of the model? I'd love to hear your thoughts!Thanks,---Tom AlphinP.S. For additional photos of the build, and more involved discussions about Form vs Applied Decoration in Architecture, feel free to read the longer review I posted to http://brickarchitect.com/2017/review-21036-arc-de-triomphe/ -
My latest MOC is part of community winter-themed build. The goal was to brickbuild houses from Faller's catalog (or mimick their style for a unified look of village houses). I chose this house specifically for the timbered look. I found it attractive with the angled timbers, but had many diffuculties building it. In the end, I made some compromises, mostly due to easier transport and setup at the exhibition. The floor plan is 40 x 26 studs with the entrance sticking out a bit. The height of the building is 23 bricks. It is large for a minifig scale, but it was not possible to include all the hallmarks of the original. So just imagine the rooms inside with multiple beddings for hikers and climbers somewhere high in the Alps (there's no interiors, so let your imagination go wild). The original model has a much more detailed entrance. I intentionally built just a small porch, with steps covered with snow on the edges. The back and the sides of the building are similar with the repeating pattern. Since it's a winter-themed build, there's snow on the roof and window sills are empty. The flowers will be planted in the spring. My favourite detail are the horns just bellow the roof. It's not so clearly visible on the photos. Considering the size of the buildings, I am satisfied with how it turned out. There's definitely many shortages, such as the angled timbers (secured on the back with tape), a bit wobbly roof on Technic base (not an expert, so it's not as sturdy as it should be). I wanted it light and easy to transfer, so I awoided thicker walls to secure the angled tiles. However, I'm sure it will survive the transport to the exhibition.
-
This is probably the most complex model I've designed (and built) up to now. The Guggenheim Museum Bilbao is one of the most spectacular buildings of the recent decades. Its style of deconstructivism and seemingly random but also very organic curves make for a magnificent view. It was a real challenge to build this in LEGO. I decided to use white bricks for the titanium surface - metallic parts are too rare in LEGO and grey seems too dull for the highly reflective surfaces. The building is surrounded by water and some large works of art, most noticeable the tulips (represented by violet cherries in the model) and the puppy by Jeff Koons. More pictures can be found here if you are interested: http://www.brickshelf.com/cgi-bin/gallery.cgi?f=571042
-
Nasty Tower Opposition (Awful Towers) Gloomy Towers
