THIS IS THE TEST SITE OF EUROBRICKS!
Search the Community
Showing results for tags 'automobile'.
-
For those of you who don't know, the department store Sears (remember them?) used to sell homes through mail order catalogs as do-it-yourself kits from 1908 to 1942. Over the years, they had 370 styles available, and ~70,000 homes were built over that timeframe. They had optional extras for each style including electricity, indoor plumbing, central heating, and telephone hookup. You can read more and even flip through numerous catalogs here on Wikipedia. The house I've made is not based on any specific model or year, but it *looks* like a 1920s / 1930s kit house to me, so thus it became one. This house is a super heavily modified version of a Brick City Depot design, specifically this Winter Village house that I bought instructions for over a decade ago. I updated the design quite a bit, while leaving enough of the early-2010's charm of the original MOC. I also added a much-needed back half to the model with stairs to the upper level and a chimney. The building folds open dollhouse style. Inside the front we have the entryway / foyer, and living room, with bedroom upstairs. In the back we have the dining room and stairway, all with the proper furniture for each room. The modular footprint is removable from the building. I like the late-1930s car from 2015 San Diego Comic Con set 'Action Comics 1 - Superman', but don't particularly like the colors - or the insane price! So I used the instructions and built my own version in dark blue. The car has a number of changes from the set, but it still seats one figure at the wheel. The rear of the car. Inside the car, featuring the drivers seat. ...apologies for the dust everywhere. I don't know where it came from, I just built this MOC last week! Thanks for viewing! -
This updated version of my 2023 MOC of the UP house - set 43217 (and a back half addition I found on Rebrickable by user rykfield) features a new removable modular footprint. The green Studebaker is also new. This version of the house folds open and locks shut on a Technic pin. I built the house's rear half from some movie-accurate instructions on Rebrickable, as seen here. The rear half of the house. The lower floor features a living room, foyer, and dining room while the upper floor features a bedroom and music room. This is the inside of the front half of the building. The rear half of the house's interior. Most of the furniture seen in these two pictures is recolored from the Friends 'Downtown Flower shop and Furniture Store' (set 41732) along with a few pieces from the 'Moving Truck GWP' ( set 40586) and the original UP house itself. The removable modular base without the house. It features a birdbath, driveway, and opening gate. This car's bullet-nose front end was inspired by the look of the 1950 / 51 Studebaker Commander while the color scheme and rear bodywork were inspired by a old Indiana Jones MOC by @hachiroku. The rear has two coverings partially obscuring the rear wheels, in true '50's elegance. The roof comes off to place a figure at the wheel and in the backseat. This mini fig (the owner of house and car) is modeled after my Great Uncle Jack. (the family just calls him Uncle Jack) He's an ex-Marine, Korean War vet, and tough as nails with razor-sharp wit. Yet he's also the nicest, most friendly man you'll ever meet. NOTE: Sorry for the dark colors of the photos. My phone hates taking pictures of things that are blue and / or green. I had three different light sources, and it still turns out too dark! Thoughts?
-
This model was built from a single picture of 2024 Friends set 42638 - Castle Bed and Breakfast. I made the model in my own style, while attempting to keep the proportions of the set. I gave it a fold open back, and had to redesign the turret-area as I had no clue how they assembled it in the set. The official roof was likewise unfamiliar territory at the time, so I originally improvised a new one using bricks and slopes. (which was a total pain) Since the set's instructions came out, I replaced the roof with the one from the set. The early-1930's Duesenberg SJ seen out front of the house is based off the car seen in Indiana Jones set 7682 - Shanghai Chase - from the 2009 Temple of Doom line. I updated the car's look with parts not available 15 years ago, and added a hardtop roof among other things. The rear isn't too exciting: I added a back door, and added a chimney by the turret up front. The building is also removable from the modular base so it can open up. The ground floor features the living and dining rooms. The ground floor near the stairs features a telephone and painting. The second floor features a writing desk along with a table and lamp. Inside the upper part of the rear half featuring the stairwell. (There isn't much to say about this bit.) The third floor features the bedroom and bathroom. The front of the vehicle alongside the owner of both the house and car. The rear of the car. The car seats two figures inside the cabin. Comments, questions, and complaints welcome!
-
This early-1930's Duesenberg SJ is based off the car seen in Indiana Jones set 7682 (Shanghai Chase) from the 2009 Temple of Doom line. I changed the color from tan to black, updated the look with parts not available 15 years ago, and added a hardtop roof among other things. Oh, and me being me, I added some flanged railroad wheels to use the car an an inspection vehicle for railroad officials like the one shown. (Because why not drive the high iron in style?) I've always wanted to build one of these in black (since the set was released, actually), and now I've got one! The only problem is, it show dust WAY too easily, as you can see. ...It's the curse of building in black! The rear of the car. The car seats two figures inside the cabin. Thoughts?
-
This building is my Adventurers' headquarters building, and is used by Johnny Thunder and his friends to store and research recovered artifacts from all over the globe. (and beyond!) The model's framework / basis is half of set 76108 - Sanctum Sanctorum Showdown from 2018, and much like that fictional building, is filled with secrets and dangerous artifacts. The building is built to modular standard on a 16x32 baseplate, and is also infinitely stackable - the two middle floors can be repeated to be as tall as you want without changing anything, just like Cafe Corner from 2007 was able to. Sadly, the lamppost is not placeable in the proper place because of practically no clutch on the baseplate in the correct spot. (the baseplate is pretty old and worn) The rear of the building isn't very pretty. It has a basement entrance (purely for looks - it goes no where) and a back door to the first floor. This floor is the lobby / reception - it's where Johnny and co. get info on lost treasures and also the whereabouts of Lord Sinister and his cronies. This floor features a large cabinet, radio, desk, telephone, bankers lamp, and two chairs. A clock hangs on the wall by the door near a hat stand. This level is the break room / reading room for the upstairs library. We have a couch, standing lamp and table on this floor. Trophies, treasures, and weapons adorn this level. These include: the Storm Amulet from Ninjago, the Golden Shield from Orient Expedition, a Trident from the lost city of Atlantis, Thor's hammer (Dr. Kilroy is worthy), the fabled Re-Gou ruby, a T-Rex tooth found on Dino Island, among a few other, more puzzling items. This floor features items that can alter your mind and corrupt your soul, such as The Ice King's Crown, the One Ring, and a strange crystal skull. (Do NOT look it in the eyes!) Also on this floor is the library on everything archeology, the occult, myths / legends and somethings better left unsaid. This car is named the Scorpion Tracker, named after set 5918 - Scorpion Tracker - but styled after set 2995 - Adventurers car and skeleton. It was also heavily modified from a model by BricksAA and these free MOC instructions over on Rebrickable. The model features a spare tire hanging at the back of the vehicle and seats three figs - one in the back row and two up front, as shown. I'll leave you with this parting shot of Johnny Thunder, Dr. Kilroy, and Pippin Reed off on another expedition into the unknown... where are they going now - who knows? But wherever they will go, ADVENTURE awaits! Thoughts?
-
Recently I reverse engineered what I could of the 1950's-styled 'lead sled' in upcoming summer 2024 set 60408 - Car Transporter. I didn't have pictures of the rear (and obviously instructions were also a no-go at this time), so improvised as best I could using what I thought looked reasonable for a fifties car. I managed to get 99% of the car built from one picture. The front of the car with the vehicle's owner. I can build the car in other colors, (yellow and red are among the possibilities currently) but I'm keeping my lips sealed on what the future holds... The rear of the car. Admittedly, I stole the taillights design from this old @hachiroku MOC. The inside seats one figure at the wheel. Here is the original car from set 60408, which releases this August in the USA. This is the one picture I used to build the car MOC, which was cut from a much larger picture and greatly expanded in size. ...That's all I got. Thoughts, comments, questions, suggestions, and complaints welcome!
-
This is basically a stock CITY set (specifically set number 60119, "Ferry") The catch is it features about 27 more parts which make the ship look a lot better. I added some height to the walls to keep the imaginary water (as the boat does NOT really float) out and extended the bridge's length by two studs to make it a little less cramped, and Ii even put in a seat for the Captain. The additional wall height makes the loading ramps a bit more in tune to the rest of boat, as they now line up nicely with the walls when folded up. These are all the parts needed to modify set 60119 to be more sea worthy with the higher walls and extended bridge. Here is the original model to compare mine to. (image taken from BrickLink) I hope you like my model, you can make the modifications yourself, courtesy of this handy LDD file: http://www.moc-pages...1465332822m.lxf NOTE: The stock parts are grouped separately in the LDD file, while the remaining pieces are the extras. Comments, Questions and complaints are always welcome!
-
This is my LEGO military mini figure's car from the '50's. It is supposed to have a bunch of printed parts on it... please see the pictures below for a picture of them all. Also, after much editing and modifying, this car can now fit a mini-figure in it: I just tested it in Lego Digital Designer. Here we see the car with it's owner, Admiral Oswald Lyons, who happens to reside on my futuristic space base with my Imperial gray scale set 9515: "the Malevolence" inspired space ship, the Nevermore. But today he's just about town in his vintage Army car. As you can see, the car features covered rear wheels and a removable roof to place a figure inside. The rear of the car. The car is supposed to have these prints on it. I don't want to add all the links from Brick Link to this page, but you can find them all under this tab in the "sand green" color section: http://www.bricklink...=P&colorPart=48 Their are missing prints in the LDD file that are detailed i this photo. They are supposed to be placed as follows: The two sand green 1x2 bricks go on the sides where the dark tan bricks are, while the sand green 1x4 tiles go where the dark bluish gray tiles are. The car maker logo is to be placed on the trunk, while the star goes on the hood. NOTE: their are 7 pages of 50 items each on this tab, but I'm pretty sure you can find these parts by the picture above and cross referencing it with Brick Link. ALSO: Their are two parts that are double in quantity, so their picture appears twice instead of once. LDD file for the car and Oswald: http://www.moc-pages...1462053664m.lxf NOTES: I will probably will build this soon, most likely during / right after May, so watch this space for real life pictures either in mid - May or early June!
-
"Ah, it feels good to be in a bear's natural habitat... a Studebaker" - Fozzie Bear Here is Fozzie's 1951 Studebaker Commander from the original Muppet movie in its original rusty condition. It should fit Fozzie Bear and Kermit the Frog, but I make no promises on the banjo fitting for the “Movin' Right Along” musical sequence. Sadly, the roof is very hard to remove (and this being reddish brown of unknown vintage) that I fear removing the roof to place the two figures inside will shatter parts. The Muppet CMF's my dad bought will thus just have to stand next to the car. (Its not like you can see inside the car to see them driving anyway!) Even if I could get the roof off, Kermit has to sit in the backseat as there isn't enough room up front for both side-by-side. In fact, they have to be centered in each row of seats to fit at all, due to arm constraints. In a show I saw about this film they mentioned the following factoid: The car seen in long-distance tracking shots was an identical second car, while the one with the closeups / scenes of Fozzie visibly driving had the steering re-connected to a wheel in the trunk, along with the relocated pedals and shifter. They also mounted a TV camera in the nose of the car, and a monitor in the trunk, so the driver could see where he was going. ...and that's all I've got. But before I go, I'll leave you with this: “Someday we'll find it, The LEGO Connection, The Designers, the MOC-ers and Me"
-
This late-1930's American-styled coupe car model is heavily modified and recolored from these free police car instructions as seen at this Rebrickable MOC by user Leewan. I remade it into both yellow (not shown) and blue varieties from the original black-and-white, removed the doors, and revised some other stuff "under the hood". Also, the model bears a resemblance to the titular car from the 1952 Disney short film 'Susie the little blue coupe'. The front of the car. The rear of the car. The inside can seat two figures and the roof is removable. (Picture from Wikipedia - the short's music is still under copyright, but the pictures are not, strangely!) I couldn't do the radio antenna on my MOC, as it changes sides on the car from scene to scene. Also, I couldn't get the eyes on the windscreen. Fun facts: - The design of the Disney / Pixar 'Cars universe' characters was inspired by Susie. - Bill Peet wrote the story treatment for Susie the little blue coupe. (he was quite prolific as a writer and animator for Disney, see his wiki page) Later, he also write the book 'The Caboose Who got Loose', another one of my favorite books - and MOC's! ...and that's all I got. Thoughts, comments, suggestions and questions are appreciated!
-
This somewhat spooky, gothic-looking modular building was inspired by the tavern in Harry Potter set 76388 - Hogsmeade Village Visit, with a color scheme lifted from 75583 - Minions and Gru's Family Mansion. The car was reverse engineered from what I could see of the 1950's 'lead sled' in upcoming summer 2024 City set 60408 - Car Transporter. I added a back half to the building, built another level, plus I put in a conservatory and a fireplace flue. I also changed the coloring to dark bluish gray with a black roof, from the original dark tan with dark gray roof. The building folds open on a hinge, and as such lifts away from the modular compatible base to allow for you to open the building. The rear isn't that exciting too look at, but it does it's job well enough. Inside the front of the building, the lower floor has a dining room, while the second floor has a well-stocked library. The third floor is the attic space. In the back of the house, on the lower level we see the living room and conservatory. (this latter area flips open for access) Moving onto the second floor is the bedroom. (the black thing with trans-blue glass is a fish tank) Finally, the attic is located on the third floor and is mostly vacant. The modular base can also be removed from the building. I didn't have pictures of the rear (and obviously instructions were also a no-go as the City set won't be out until August), so improvised as best I could using what I thought looked reasonable for a fifties car. I managed to get 99% of the car built from one picture. The rear of the car. Admittedly, I stole the taillights design from this old Hachiroku24 MOC. The inside seats one figure at the wheel. Thoughts, comments, complaints, and questions welcome!
-
For it's entire production run of fifteen million vehicles, made from 1908 to 1927, the Ford Model T came in any color you wanted... as long as it was black! These two Model T MOC's were inspired by a MOC by Calin over on Flickr. Each car seats one figure. Here we see two brand-new 1923 hardtop Tin Lizzies about to be loaded on a flatcar for delivery to a Ford dealership in Anytown, USA. Yes, I know this isn't how they did it back then, they actually loaded them in boxcars. But then, if I did that, then you couldn't see the cars! Thoughts?
-
A famous ussr vehicle - gaz 53. gaz_53_bread.lxf
-
8-wide build, opening side-doors, two seats for minifigs. Can bother with opening trunk, though it'd make the model not perfectly strong and sturdy. Pics:
-
(I'm not sure where to put this model, as it's town, but based off a licensed set in a classic space color scheme!) This classic car was inspired by my previous car for Benny the 1980-something space guy, and partially by set 21108. (that's the Ghostbuster's Ecto 1) With the Ecto 1, I removed the front hood, shortened the car's length and width to make it about the same size my usual CITY-scale vehicles at a acceptable 24 studs long and 6 studs wide. I then added the front hood and grille work which was originally inspired by set 4728 (Escape from Privet Drive). The rear of the car features twin exhaust pipes, and a license plate that in all likelihood is a vanity plate saying "BENY84". (as 1984's the year our favorite blue Classic Space astronaut was introduced) (picture from Bricklink) Also, the 4x2 slope should feature the print above (link to Bricklink: http://alpha.brickli...63pb021#T=C&C=7 ) Anyway, the car looks like it could fit a figure, but it can't as of right now... It probably could work but would require substantial body work MODs that I frankly don't want to do right now. (sorry!) The car will be built by summer, and will replace the car seen in the above picture. LDD file: http://www.moc-pages...1452458064m.lxf
-
This three level autorack was originally found on LGauge .com as seen here. I redesigned that model and added tiny automobiles to fit into the racks. I also recolored the yellow parts to dark gray to fit better with my other freight cars. There is a single plate worth of clearance between the automobiles and the rack above. The automobiles are attached using 2 x 3 plates, put they are removable... if you take the roof of the freight car off first! As usual, comments, questions and complaints are welcome, and the ldd file is here. Thanks for viewing!
-
Last month marked the second anniversary of my YouTube channel, so I decided to recreate the first video I posted: a high-speed Sport Utility Vehicle. In different ways, my production skills have improved, and in other ways, not as much. I think I still have a lot to work on... do you guys have any suggestions? I'd like to know how my videos are perceived. Thanks to all who have been watching my videos and have subscribed! -
This building was inspired by 2008 set 10184, Town Plan. I added a rear to the building in a style like set 31026, Bike Shop & Cafe. The building also takes cues from ScotNick and his modular take on the Town plan set. (see it here) I personally think this building looks very Back To The Future-like. Please note, my version of the building is not modular, and swings open to reveal the inside, such as in set 31026. It even locks shut on a Technic pin to keep the building closed. The upper floor features the mayors office with filing cabinets while the lower floor features the secretary’s desk. I know their isn't much in here, but I didn't know what to put inside. The back of the building. The middle rear window was very frustrating: it doesn't look like I imagined it but does manage to give off a clean appearance. The car was originally based on the car from set 10232, (Palace Cinema) along with a front end inspired by set 70906 (The Joker Notorious Low-rider) and a rear partially taken from set 79011. (The Penguin - Arctic Roller) The car features seating for two mini figures, but the figures can not see out the front windshield. The trunk at the back of the car can fit a suitcase inside and the side doors can open wide. The LDD file for both car and building as seen above is ready for download here. Comments, Questions and complaints are always welcome! NOTES: Newly edited model: I revised the roof and column tops by suggestion of a certain Eurobricks user. The model can now open only up to 90 degrees and the year 1922 goes on the top of the building where the exposed studs are in printed 1 x 1 tiles. You can compare the new model to the old one above. (the old building model is NOT included in the updated LDD file seen earlier in this post!)
-
(NOTE: Since this is a Adventurers building for my town and not situated in a jungle, desert or something like that, I thought it would be okay to post it in the town forum. If the mods don't like it here, feel free to move it to the Action and Adventure forum.) This model was inspired by set 70912, (Arkham Asylum) from the LEGO Batman Movie theme and was built for Lord Sam Sinister, the main bad guy from the Adventurers theme. Whereas that set is only the front facade of the building, this model features two opening rear quarter sections to reveal the interior details plus a tower in the front above the front door. The model consists of three sections: the front half, the left quarter and the right quarter. The stylish car is modified version of set 70911, (Arctic Roller). The car model is about 8 studs wide (with a tiny 1/2 stud bit of overhang on each side due to the front rims) and 28 studs long in total. This model can fit one figure sans top-hat in the driver's seat and has space for a briefcase or top hat in the trunk. The rear of the mansion features rows of windows and a stone fireplace flue on the left side, plus a window on the lower left for the small dungeon. The model consists of three sections: the front half, the left quarter and the right quarter. Each section is connected to the next with two hinges and a small set of two Technic pins (one per side) to lock it shut. The front half of the building features a drawing room on the left side of the picture, a living room on the opposite side, and the bedroom on the upper floor, which also has access to the tower above the main entrance. The spaces below the stairs are a wine cellar / kitchen on the right with the large casks, and on the left is the dungeon for any do-gooder spying on Sam Sinister. The right quarter has the other half of the ground floor dining room and part of the kitchen / wine cellar, a couch in the living room and a phonograph in the bedroom. The left quarter features the fireplace mantle and flue (the year 1892 as stated above the fireplace mantle reflects the year of the house's construction) , plus one half of the dining room on the ground floor. The room with the bars on the windows is the dungeon for unwelcome "guests" of Sam Sinister. The car by itself is about 8 studs wide (with a tiny 1/2 stud bit of overhang on each side due to the front wheel wells) and 28 studs long in total. As a side note, the headlights are not clipped in the same way as the original set had, and are instead sandwiched in place with 1 x 6 plates and headlight bricks. The rear of the car features a license plate for Lord Sam Sinister and dual exhaust. The car can fit two figures sans top-hat in the driver's seat and has space for a briefcase or top hat in the trunk. EDITED 1/3/18: Added real life pictures and newly updated text. Of course, comments, questions and complaints are welcome, and a big shout out to @sander1992 who, among others, are helping keep the Adventurers spirit very much alive!
-
This car MOD was inspired by the flying car named Lola from the Marvel set number 76077. (Iron Man: Detroit Steel Strikes) The color has been changed from red to yellow, though blue, red, and black are possible colors that can be built instead of yellow. I removed the flying car convertible wheels and replaced the printed front grille with actual grille tiles. I also added a licence plate, rear bumper, and side mirrors. The car can seat one mini-figure, and the cabin features opening side doors. LDD file coming for this model as soon as MOCpages is back online. Comments, Question, and Complaints are always welcome!
-
(Note to the MODs: This is in the town forum because it's a car. It could have gone in either the Adventurer forum, the Licensed forum, or here in the Town section. I chose Town because it could be easily modified by taking the figure out and making it into a regular 1920's car again.) The car on the other hand was inspired by this build which was in turn a modified version of set 70911, (Arctic Roller) This model is Sam Sinister's largest ride to date and lacks the spring loaded shooters of the original set. I replaced them with a proper car grille. The car by itself is about 8 studs wide (with a tiny 1/2 stud bit of overhang on each side due to the front wheel wells) and 28 studs long in total. As a side note, the headlights are not clipped in the same way as the original set had, and are instead sandwiched in place with 1 x 6 plates sand headlight bricks. The rear of the car features a license plate for Lord Sam Sinister and dual exhaust. The gray round thing on the trunk is supposed to house a spare tire, but it doesn't.... it's really just for looks. Two figures (sans tall hats) can fit side-by-side in the car, and their is space in the opening trunk for a briefcase. The teeny tiny mini-figure out by the front door of the house is Lord Sam Sinister... it just gives you an idea how massive the house and car really are! (the house can be found here) As usual, comments, questions and complaints are always welcome!
-
This train was originally supposed to go with the new Crocodile electric locomotive (set 10277) that was revealed a couple months ago. But it doesn't fit my UK "theme" very well, so I bought this train instead. This engine is numbered 514 (as a tribute to the HC514 part seen in the Adventurers sets), and the the tender should say LNER, (London North-Eastern Railway) as that's who originally designed and built the Z1 class locomotive. This 4-6-2 type engine is named Hazel Crusader, and is not actually owned by the railroad company, but it is maintained and crewed by the railroad's employees when called upon by Lord Sinister to be moved from his private siding. (That's why it has the non-LNER-standard gold, black, and brown paint scheme that matches his coaches: it's Sam's personal color scheme for his railway stock - it's owned by Lord Sam Sinister himself. He even had this locomotive designed just for him.) In reality, this Z1 type never existed on the LNER, as it is a creation of my own imagination. My fictional Z1 take on the wheel 4-6-2 arrangement is inspired by the 2-10-0 Austerity class of WWII (boiler wise) with a tender donated by the A3 which originally pulled Sam Sinister's train. This is Sam Sinister's automobile, situated quite precariously on a two-wheel flat car that is much too small. Being that Sam is cheap, he bought the one that would cover his needs... sight unseen. The railway yard master's eyes nearly fell out of his head when he finally saw what Sam was going to load onto this flat car! The flat car is easily detachable from the load, as you can see here. (NOTE: This car was inspired by the 2015 SDCC exclusive Action Comics number 1 Superman, recolored and heavily modified.) The car seats two figures side-by-side, and even comes with a spare tire in the back. This Gatling gun car protects the train from any goody-goody interlopers trying to make off with Sam Sinister's ill-gotten goods... namely Johnny Thunder and his friends. NOTE: The Gatling gun on this car was taken wholesale from set 79111. (Constitution Train Chase) These looted ancient Egyptian items include: a temple guardian from the Well of Souls (taken from set 7621, Secret of the Lost Tomb), a obelisk warning others to not defile it's owner's tomb, and the Queen's sarcophagus itself, with a very angry mummy inside. (Guess Sam doesn't listen very well, huh?) I wasn't kidding about that curse you know! Look's like Sam's somehow stolen a Sphinx as well! (not THE Sphinx, of course, that would never fit on his train car and would be a bit missed by the locals... not to mention any snooping Archaeologists!) Thankfully, however, Sphinx were not inscribed with any magic hieroglyphics, so they are safe to observe.... or in Sam Sinister's case, "borrow without permission". Unlike the Re-Gou Ruby's twin (yet not worth anything) gem which can curse you to an eternity of bad puns, as the now-mad Baron Von Barron found out. In reality, the statue's head was inspired the one in set 5978. (Sphinx secret surprise) In this train car we find all the weapons one could dream of in the 1920's, as it is called the armory car after all. (Thanks again to @Pdaitabird for making these cars in his awesome instructions, which you can find on Flickr here.) This is Sinister's war wagon. Why is it called that? It has old charts, brand-new maps, magazines and trade journals, plus all kinds of notes with clues to hidden locations with items of vast power or great fortune just waiting to be grabbed. If Johnny Thunder or Sam Sinister hasn't seen it or at least heard of it, the item probably doesn't exist. This car also houses Lord Sinister's bedroom for overnight journeys. Here we see the whole train at an "on-it's-side" view for maximum viewing. Thoughts, compliments, complaints, and suggestions are all welcome! NOTE9/22/2020: Added updated real world pictures of everything, including the Sphinx car and updated steam loco, now called Hazel Crusader 514. (as in HC-514, the print on the tile on the side of the cab. Took me quite a while to figure out a good name for the engine!)
-
Baby Porsche or VW Beetle tuning? This is a fictitious race car, I hope you like it :) You can support it on Lego Ideas: https://ideas.lego.com/projects/68cb5ef6-6e2c-40fc-9dca-0e4b7f3fe64a It is a studless build in Speed Champions scale, but with City wheels. I used only standard LEGO elements, the slopes with stickers are part of the set called 1968 Ford Mustang. Baby Porsche 01 by László Torma, on Flickr Baby Porsche 02 by László Torma, on Flickr Baby Porsche 03 by László Torma, on Flickr
-
I was inspired by set's 75972 (Dorado Showdown) and 75953 (Hogwarts Whomping Willow) to create this small town auto repair shop with flat-bed tow truck called Smokey's Garage. The building features a raised platform for cars (such as the Anglia) to roll onto and be worked on, with folding ramps to keep the broken-down vehicle in place. NOTE: The front of the building is missing sixteen of this part in dark bluish gray above the second floor windows and the side door on the first floor. Also, two of these printed 2 x 4 tiles go on the hanging sign out front of the garage. The front of the building, with the ramps lowered for receiving a broken-down car. The rear of the building folds open to allow access to the inside. The upper floor is the break room, with a rock-n-roll album on the table, and hi-fi stereo system in place to rock around the clock..... at least during business hours! Here is the album piece. The rear of the building. This truck is basically a stretched version of the hover-vehicle in the Dorado Showdown set. It is missing two light-bluish gray ones of these (used as the back of the headlights in the set) as they don't fit where they are supposed to go in the model due to a LDD glitch. I added regular-size wheels, and safety stripes to the deck, which sadly does not lower into a ramp like a real truck would... but it does just barely fit the Anglia IRL! Here is the flatbed tow truck and the '67 Anglia in real bricks, plus the two workers Charlie "Smokey" Jones (on left) and Caroline "Carol" Jones (on right). Smokey owns the garage when this picture is taken (It's 1969 in-universe) and does the heavy diesel work and home cooking, while his wife Caroline does the gasoline engines and book keeping. They have a daughter, named Josephine Jones (nicknamed "Jo" and isn't present here) who is in training at trade-school to become a mechanic. She will shortly join the family business in 1970, and takeover from diesels when Smokey dies in 1976. Carol stays on until 1983, when she retires to work on restoring a Ford Model A as a pet project. Jo renames the business "Jo's Garage" in 1985 after moving to a new location (seen in set 10264, Corner Garage) in the downtown area when the older building became too outdated and small. She continues to run the garage today, even bringing her son Franklin into the family trade as of 1997.. NOTES: I just bought the Dorado Showdown when it was $18 (US) from Amazon and then I went and subtracted all the parts I could find for this project in my own parts bins from the BrickLink file. The truck and Anglia themselves are finished already without ordering anything, and the building is down 200+ bricks from when I started looking for parts... still need to order around 520 more. Keep your eyes peeled for real-world pictures of the vehicles, coming soon!
-
This Classic Space version of Build Better Bricks' Iron Giant with the head of the previous @hachiroku version of the Giant's head added on. (consider it a mashup of the two Iron Giant models!) The car was also inspired by this Hachiroku build here, and was originally made by me in September 2020. I have just now revised this early 1950's car for Benny with new mudguards that cover the (enlarged) two rear wheels. I made both MOC models into CS colors (black, both "new" grays, and blue, with white for the car roof) with red and green indicator light parts (on the robot only), and two yellow / black bumblebee stripe tiles with a printed 4 x 2 slopes on the arms / car trunk lid. (They aren't shown, but have this print) The gray jumpers near the robot's waist are for power conduits, so he can be recharged without consuming (costly!) metal products via his opening mouth. Speaking of which, the mouth now can open to allow for posing... but unfortunately, it doesn't play nice with the shoulders, so the mouth must remain closed until I can figure out a better solution. Another thing that didn't work well was the rotating waist: it operated too jerkily and was hard to operate, so I removed that feature. The rear of the robot. Not sure if it's a feature, but the arms won't go down any further to the sides... I tried everything I could think of, but no dice. This is because the arms can't be removed without destroying the awesome-looking - and very intricate - torso. Looks pretty classy, right? The two doors open, but the obligatory black space seat is missing, because any more height and Benny would not fit inside. The rear has a license plate, the classic space logo, and two coverings mostly obscuring the rear wheels. As a courtesy to the driver instead of the space seat, I have included a light bluish gray upholstery for the back of the seat. As usual, Thoughts, Suggestions, Comments, & Questions of any kind are always welcome! So, what do you think?
