THIS IS THE TEST SITE OF EUROBRICKS!
Search the Community
Showing results for tags 'mansion'.
Found 17 results
-
After my original 2016 LEGO Addams Family Mansion received such great IDEAS fan support (10,000 votes!), I have created a Modular version keeping under the 3,000 part IDEAS limit, and used normal modular dimensions. Although some reduction in detail was inevitable as the original had over 7,000 parts, the Mansion remains in its full glory. I hope you enjoy it as much as I enjoyed building it! https://ideas.lego.com/projects/10fc83f1-dcdd-4472-9db3-9a7b2aa3d88c https://www.flickr.com/photos/140336078@N03/sets/72157693298629335
-
This house was digitally built in 2018, really built in 2019, then languished in a WIP state for several years before being finished last month. Enjoy the pictures - this model has been a long rough ride since the beginning, but it was worth it! I was inspired to create this model from the 2018 Jurassic World set 75930, Indoraptor Rampage at Lockwood Estate, with some design cues from set 10228, Haunted House. The dollhouse-style model was built from the set pictures, with the play features removed and opening rear sections added to match the front half. The house folds apart, doll house style, with the rear section opening in quarters up to 90 degrees. (Technic pins hold the model shut for transport and ease of handling) The modular building compatible base is able to be removed from the building to facilitate access to the inside details. The rear of the mansion features a back door (perfect for escapes when the locals get feisty about the scientist playing god again!) and the chimney flue. Moving inside, The bottom floor features the living room and dining rooms, while the second floor is the bedroom, study and pipe organ rooms. The third floor features the laboratory for the study of time travel. The rear door to the outside is in the right rear section, while the safe containing the house's title and family paper work is directly above on the second level. This area also has stairs from first to second floors and what appears to be Frankenstein's monster on the third floor's operating table! The left rear quarter features the fireplace and telephone on the first floor and a bed for the second floor's master bedroom. The stairs to the third floor are also on this side. It seems the time stone from the Marvel Universe is also here... I wonder what the Doctor plans on doing with it? I built the roadster model by heavily stretching set 40532 - Vintage Taxi by about seven studs. This allowed for me to add in mechanical details. I added a covered spare tire at the rear of the car, and blacked out the back windscreen to give the impression of a fabric convertible top. As an added bonus, the car still seats two figures with room in the trunk for luggage. (Any and all resemblance in the mad doctor to moderators, living, dead, or otherwise, is totally coincidental. It is totally not @Professor Thaum in his younger years. ) The rear of the MOC. Inside view of the car, with seating for two and room for baggage. ...and that's all I've got. Thoughts, comments, complaints and suggestions welcome! -
THE MASK OF ZORRO left its mark to my childhood in 1998. At my young age, I was pretty impressed what I watched. The way that this mysterious, dark hero with his black mask and cape was fighting for peasents against Spanish dons. The scenes, costumes, acting, story... they were all attracted me. Before I decided to make a Zorro moc, I planned to build an old Spanish manor, but later on I thought, why not. About the movie, I find many similarities with Pirates of The Caribbean so if you haven't watched Zorro but like PoC, give a chance. ~Z~
-
(NOTE: Since this is a Adventurers building for my town and not situated in a jungle, desert or something like that, I thought it would be okay to post it in the town forum. If the mods don't like it here, feel free to move it to the Action and Adventure forum.) This model was inspired by set 70912, (Arkham Asylum) from the LEGO Batman Movie theme and was built for Lord Sam Sinister, the main bad guy from the Adventurers theme. Whereas that set is only the front facade of the building, this model features two opening rear quarter sections to reveal the interior details plus a tower in the front above the front door. The model consists of three sections: the front half, the left quarter and the right quarter. The stylish car is modified version of set 70911, (Arctic Roller). The car model is about 8 studs wide (with a tiny 1/2 stud bit of overhang on each side due to the front rims) and 28 studs long in total. This model can fit one figure sans top-hat in the driver's seat and has space for a briefcase or top hat in the trunk. The rear of the mansion features rows of windows and a stone fireplace flue on the left side, plus a window on the lower left for the small dungeon. The model consists of three sections: the front half, the left quarter and the right quarter. Each section is connected to the next with two hinges and a small set of two Technic pins (one per side) to lock it shut. The front half of the building features a drawing room on the left side of the picture, a living room on the opposite side, and the bedroom on the upper floor, which also has access to the tower above the main entrance. The spaces below the stairs are a wine cellar / kitchen on the right with the large casks, and on the left is the dungeon for any do-gooder spying on Sam Sinister. The right quarter has the other half of the ground floor dining room and part of the kitchen / wine cellar, a couch in the living room and a phonograph in the bedroom. The left quarter features the fireplace mantle and flue (the year 1892 as stated above the fireplace mantle reflects the year of the house's construction) , plus one half of the dining room on the ground floor. The room with the bars on the windows is the dungeon for unwelcome "guests" of Sam Sinister. The car by itself is about 8 studs wide (with a tiny 1/2 stud bit of overhang on each side due to the front wheel wells) and 28 studs long in total. As a side note, the headlights are not clipped in the same way as the original set had, and are instead sandwiched in place with 1 x 6 plates and headlight bricks. The rear of the car features a license plate for Lord Sam Sinister and dual exhaust. The car can fit two figures sans top-hat in the driver's seat and has space for a briefcase or top hat in the trunk. EDITED 1/3/18: Added real life pictures and newly updated text. Of course, comments, questions and complaints are welcome, and a big shout out to @sander1992 who, among others, are helping keep the Adventurers spirit very much alive!
-
This story is set in my Adventures / Monster fighters / Pharaoh's Quest Universe of the early 1920's. (First off, I want to apologize for these photos: I didn't have an area big enough to handle the four story tall building, so I improvised. It doesn't look very pretty, but it's passable.) I was inspired to create this model from the 2018 Jurassic World set 75930, Indoraptor Rampage at Lockwood Estate, with some design cues from set 10228, Haunted House. I made the mansion to replace this other MOC I had made, but don't worry, the other building still exists, it's just empty right now. The Wormwood Estate The dollhouse-style model was built from the set pictures, with the play features removed and opening rear sections added to match the front half. The model also features a round window for letting in moon light in on the mad doctor's experiments, along with lightning rods on top of the house. (for powering his experiments) The rear of the mansion features a back door (perfect for escapes when the locals get feisty about the scientist playing with time travel again!) and the chimney flue. The bottom floor features the living room and dining rooms, while the second floor is the bedroom, study and pipe organ rooms. The third floor features the laboratory for the study of time travel. The rear door to the outside is in this section, while the safe containing the house's title and family paper work is directly above on the second level. This area also has stairs from first to second floors. The left rear quarter features the fireplace and telephone on the first floor and a bed for the second floor's master bedroom. The stairs to the third floor are also on this side. The Wormwood Family Automobile The stylish car is heavily modified version of Brick-Link set BL19011 (Vintage Roadster) turned blue. The car model is about 10 studs wide (with a large overhang on each side due to the white fenders on front and rear) and is 36 studs long, front bumper to rear bumper. The car can now seat two mini-figure's in the seating area, and as before feature removable engine cowling sections for a look at the V8 heart of the car. The headlights are now secured more tightly, and the front windscreen glass is now trans-black and not inclined anymore. (it was bugging the heck out of me that it wouldn't stay in place!) The taillights were moved down onto the rear bumper. No real reason for the change, it just seemed like a good idea. The Time Machine Vehicle (TMV) Here is the Scientist's 1920's-period time machine, rebuilt from set 76109 (Quantum Realm Explorers). I fixed the rotating side engines of the original Marvel superheroes set, as these objects are now (mostly) locked in the position shown. The Time Travelers' Family, Friends & Foes In order from Left to Right: Mr. Harold Sutton: wealthy financial backer of Dr. Wormwood's experiments with time travel. Secretly wishes to have full control over the project for it's use by an unknown, Sinister third party. Mrs. Evelyn Sutton: sister of Dr. Wormwood (whom she despises) and step-mother of Gracie Sutton. Married to Mr. Sutton, who shares in her secret hatred of Dr. Wormwood. Grandad Joseph Wormwood: Father of Dr. Wormwood and Evelyn Sutton, and grandfather of Billy. His wife is deceased and he is living with Nancy, Billy, and the Doctor in Wormwood Manor. Gracie Sutton: Stepdaughter of Evelyn, and daughter of Harold Sutton & a complete sociopath. She enjoys tormenting people for pleasure, including younger cousin Billy Wormwood. Billy Wormwood: son of Nancy Wormwood and the good Doctor. Secretly tormented by cousin Gracie, he tries to find an escape from his predicament in any way. Nancy Wormwood: mother of Billy, and is concerned by Gracie's "play dates" with her son. After spying on Gracie Sutton tormenting Billy, she forbids her from seeing him, which puts the Doctor's financial backing at risk as payback by the Sutton family. "X": The mysterious masked man (woman?) who kidnaps Billy in 1922 with his time travel equipment. This person is also showed up on the Wormwood's estate lawn many years ago, resulting in Dr. Wormwood's fascination with time travel. Mrs. Katie Johnson: Town busybody and local telephone operator, who keeps an ear to private conversations for her own gain. Wife of Officer Pete Johnson, who (usually) keeps her in line. Officer Pete Johnson: Member of Scotland Yard and lives near Sutton Estate & Wormwood Manor. Is keen to know just what's going on when Billy get's kidnapped by "X" and Dr. Wormwood goes off to find him in time and space. NOT PICTURED: Dr. William Wormwood: The brains behind the brand-new invention of the time machine vehicle (or TMV, for short) and rebuilder of the giant mechanoid the Brass Automaton. Father of Billy, husband of Nancy, and financial backing recipient of the Sutton family, as his fortune was wiped out in his previous attempts at travel through time. The end of the Story? More may come later, I'm not quite sure on what steampunk thing to build after the robot, which now has his own thread. As usual, comments, questions and comments are always welcome!
-
Here is my new corner modular building based on the TV series The Nanny. I made 3 facades and all the floors are removable. There are 2,600 parts and the main figures in the series. You can watch the video and more details on Ideas. HERE
-
Hello, everyone, here is my most recent MOC which I will be adding to the CCC XII. A clan of elves live in a beautiful manor protected by the natural surrounding mountains and cliffs. They are currently being confronted by members of a friendly clan to settle a dispute. More pictures on my Brickshelf page.
-
This classic 90's LEGO-styled model was originally built in 2007 by a Brickshelf user named "Widdi". That user uploaded the instructions (seen here: http://www.brickshel...ry.cgi?f=249223 ) which I stumbled upon and built / modified in Lego Digital Designer. I put another story on top for the tower, set furniture inside, added a back half, and worked a garage into the structure. The Sinister Mansion: Where you will never want to leave! Fictional Background for the house: Built in 1910, Sinister Manor is one of the last surviving houses in the Edwardian Style of architecture in Ironwood county. It was built by Lord Gregory Sinister for his family, and features one addition not usually seen on Edwardian houses: a automobile garage. The house was left to Gregory's family, (his son Sam Sinister & his sister Alexis Sinister) upon the elder Sinister's death of a stroke in 1913. Sam Sinister went on to serve in the British army in World War I, losing his left hand in the conflict and replacing it with a iron hook. When he returned from the conflict Sam set about continuing his fathers tradition: collecting treasure precious artifacts, through legal and illegal means. The collection was stored in the Attic of the sinister Mansion until it became too large and was moved to a more secure (and secret) location. The inside features the furniture from my Haunted House (10228) MOD, including (but not limited to): a Queen size bed, stove, table, phonograph, sidetable with lamp plus the couch. The first floor I has the living / dining rooms, as the couch, stove and table and other associated items are there. The second floor features the master bedroom with a small balcony on the right side. The third floor is the attic, which is empty. The tower / roof (fourth floor) is also empty. The Rear of the house. This model is significantly cheaper / less parts intensive than my other Victorian Mansion (the one based off the Monster Fighter's "Haunted House") This car, the Ogel Mark III, goes in the garage. Here are the cars statistics: Model Name: Ogel MK III Configuration: two seat Engine Class: V8 Designer: Lord Ogel Build Date: 1925 Builder: Ogel Motor Car Works Current Owner: Lord Sam Sinister Length: 21 studs Width: 6 studs Height: 5 bricks Top Speed: 88 MPH Fictional background for the car: After the Orient Expedition of 1924, Lord Sam Sinister's Island Racer was seized by Soviet (Russian) forces when Sinister tried bribing his way onto the Trans-Siberian express without the proper papers. Sinister was put on the next train out of Russia without the car. In early 1925 he boarded the Simplon-Orient Express bound for Paris from Istanbul. While in Paris he telephoned the Ogel Motor Car Corporation asking for a newer, faster and more expensive car to be sent to his home at Sinister Manor in three weeks. Sinister arrived at his Edwardian-style manor to find this car waiting for him. It features two seats, a spare tire, a much longer wheelbase and goes 13 miles per hour faster than his old car. LDD file for the house & car: http://www.mocpages....1416516743m.lxf Comments, questions and complaints welcome!
-
Hello! Presenting to you my newest MOC and project in ideas.lego The legend of ZORRO The set is basically the governor's mansion and Zorro is about to break in :) I hope I can count on your help with feed back and support regardless of this being possibly being a big and pricey set. Please support if you like it - ideas.lego - might think they have business case.Either way your opinion and feed back is always good Anyway i leave the link for your consideration - https://ideas.lego.com/projects/83319 Now for the set photos and all the details: P.S. all roof come easily off for increased playability and to check the inside and all the detaisl. When closed it also works as a phenomenal display (So I think :P )
-
Good morning to everyone. Today I am starting with a new idea (for me). I will relate the construction of my last modular building. This new building has been designed for the last LDD/LDraw Eurobricks contest in the Freebuild category, earning the fourth placing, that is like the wooden medal :D . While building it I will update my Flickr gallery. I also take this opportunity to illustrate the techniques used and the reasons that led me to certain choices, as well as any changes in the course of work . Anyway, I tell you that I do not have all the parts yet, something is still on the run, but I hope that everything will be ready by the week. Let's start. As you could see from the images of the LDD renderings, I tend to use unusual colors for hidden parts. It's the "sign" to identify every parts I can "fish" in my "old and ugly" bag of used parts, when collecting the pieces from my collection. What you can see right now is that the base that holds the floor is in fact multicolored... it's not a problem since it will be completely covered. On the back of the building I have already placed the final part of the downpipes. The problem in this case is that the 1x1 lbg cone does not stick well on the green baseplate so I have to add a 1x1 lbg plate between them. Let's go back to the base of the floor. When designing with LDD I incredibly found a lot of attack points in common between the straight underside base and the 45 degrees structure of the floor. I found it amazing, but in the end I decided not to investigate. Ldd is not quite accurate, in fact in some cases does not allow things that work in real life (try to attach a 2x1 plate with the two holes on the side of a technic brick ... ) and allows others that are not feasible ... During the construction I have placed all the 1x1 round plates as in the picture, only to discover that there was no way to hook the floor. I finally decided to put one of them centered and put another in the corner to lock the eventual rotation of the floor, as you can see in the second photo. The slanted floor has already been seen in several Moc, the technique is nice, but leads to some considerations: the first is that it forces to have a rather raised floor, the second is that the walls must be at least 2 bricks thick to hide the teeth resulting by the disposition of the tiles. As we will see later, you can hide everything well with some basic tricks. For the first time in my modulars (and especially because attending a contest, and well, with diagonal floor, studs didn't fit well), I decided to use tiles instead of plates... I still prefer the second choice to grant more gameplay, but in fact it results more pleasing. Cad design allows to position all the attachment points of table and chairs without having to undo the work of construction. In any case, I added some 1x1 dbg plates where I could place the minifigs . At the entrance I placed two little pinetrees pot. The streetlights have been attached to a 2x2 plate in order to have the foot outside of the pavement, as occurred in the Parisienne #10243. As soon as possible, the following... https://www.flickr.c...57643933765153/ Here the second part http://www.eurobricks.com/forum/index.php?showtopic=96063entry1903268 And the last part http://www.eurobricks.com/forum/index.php?showtopic=96063entry1912380 Enjoy it.
-
Hello everyone! Today i present to your attention my new long-term construction - Old Victorian Vampire Mansion! It all started in 2016, when I wanted to "increase" my most favorite set 10228 Haunted House, which, not counting little size, was perfect stylistically! But to increase it, leaving in the same performance, was not interesting to me. I watched a lot of works on this topic on the Internet and finally formed an image of the acting model in my head. Next, I counted the budget and ... postponed it to "later"))) It was lucky that my LUG join Lagbalk last year. There, I ordered the most costly part - bricks modified with masonry. The exact amount used did not count, but the figure is about 1000 bricks (in the equivalent of 1x2). A year waited for those brics and now the moment of assembly has come. The second inaccessible element was the skeletal legs, which were used as decor on the roof (there are about 150 of them). After several Bricklink-orders the house was ready. It has all 4 walls (the back part is quit simple except that the chimney). In the right window of the second floor is mounted a red light-brick. It works by pressing a button on the back of the building, creating the effect of villainous processes in the room. All other standard windows are closed "jalousie", that would not pass light, deadly for vampires. Actually, the vampire pair itself is already arrived to the entrance on theirs carriage harnessed by two black horses. On each side of the house there are two enchanted trees, which frighten all uninvited guests. So, let's have a look: Victorian Haunted Mansion. Lord Vampire and his bride just arrived for theirs home. Photo by Dwalin Forkbeard by Anton Kushnir, on Flickr Victorian Haunted Mansion. Lord Vampire and his bride just arrived for theirs home. Photo by Dwalin Forkbeard by Anton Kushnir, on Flickr
-
This is the newest addition to our LEGO Medieval Layout - a mansion for the masters as well as an integrated smaller building for the servants. The main colours of the building are Cool Yellow, Dark Red, Dark Brown and Reddish Brown. After having been stored in boxes for almost a year, our medieval buildings, towers and trees have finally seen the "light of day". -
I was inspired to create this model from the 2018 Jurassic World set 75930, Indoraptor Rampage at Lockwood Estate, with some design cues from set 10228, Haunted House, although in blue and white with trans yellow glass. The dollhouse-style model was built from the set pictures and from features from the movie itself, with the fall-apart play features removed and opening rear sections added to match the front half. The model also features a round "time window" for Benny to experiment with in his spare time. As usual, this classic space logo printed piece goes where this 4 x 2 slope is, just below the front balcony and right above the front door. The house without any figures, cars, or giant robots. The very large satellite dish on the roof is so Benny can communicate with the Classic Space fleet in any weather: rain, sunshine, snow, solar wind-storm, or nuclear fallout. Whatever the weather, Benny gets through! The rear of the mansion features a conservatory and the chimney flue, along with a back door and rear porch light. The house folds apart, with the two rear sections opening in quarters up to 90 degrees, while the conservatory opens up to 180 to allow for figure placement. (Up to five Technic pins can hold the model shut at key points for transportation with ease and handling with little fragility.) The front half on the found floor features the entry hall, TV room with couch and dining room. The second floor features the custom-printed super computer (un-printed here in LDD) and Benny's bedroom. The uppermost two floors features the science lab, with the time window and several other science experiments. Here is the huge 1970's super computer LL9000 (custom printed part) which takes up a sizable amount of space on the second level wall just above the entry hall. The right rear quarter features the conservatory and some furniture on the second and third floors, plus the dining room on the first floor. This section also has stairs from first to second floors, plus a '80's video game cabinet (Astro Nut, of course!) on the second floor. The left rear quarter features the fireplace and the stairs to the third floor, plus a miniature space monorail layout and a TV with VCR. This is Benny the 1980-something space guy's 1979 Moonraker made by Neptune Auto Group. The engine has been upgraded from a gasoline chugging-monster into a more environmentally-friendly Hydrogen-3 Fusion engine to turn it into a modern mechanical beast with a retro exterior. Benny added bigger tires to the car to get it over the craters of the small moon where Benny was stationed. The car also has a spare tire located on the opening trunk. The roof is removable, and the three seats can fit figures with air-tanks and helmets. The doors open in the front normally, but in the rear they open in a reversed pattern to create a wider opening. Real life version The building as it sits right now, before it gets torn apart to create the version seen in the first part above. Most of it's parts will be donated to create the mansion. As always, comments, questions, suggestions, and complaints are welcome!
-
The house was originally made in 2007 as a digital construct by Brickshelf user "Widdi" and was found by me at this address back in late 2014. I then changed the color, added a garage and a back half to the building, and eventually put in a chimney styled after the one in set 10228. The car on the other hand was inspired by this build which was in turn a modified version of set 70911, (Arctic Roller) This model is Sam Sinister's largest ride to date and lacks the spring loaded shooters of the original set. I replaced them with a proper car grille. The garage to the side of the building is unusual, as Victorian houses never had them. Thus, I've decided it was a later addition in 1918 by Sam Sinister when he inherited the house from his father, just after Sam returned from World War I. The rear of the building features a large amount of windows, while the far side has a stone chimney flue. The second floor features the master bedroom / writing room with a small balcony on the right hand side. The furniture on the upper floor features a bed, a desk, table with lamp, a cabinet, and a grandfather clock. The ground floor is little crowded with the kitchen and living room appliances / furniture. The items seen here includes a stove, wine cabinet, table with two chairs, phonograph, couch, curio cabinet, and pool table. The sign above the fireplace is supposed to read "1912" for that is the year the house was built. The building is modular, so the roof top, second floor, and ground floor all come apart from each other. The car by itself is about 8 studs wide (with a tiny 1/2 stud bit of overhang on each side due to the front wheel wells) and 28 studs long in total. As a side note, the headlights are not clipped in the same way as the original set had, and are instead sandwiched in place with 1 x 6 plates sand headlight bricks. The rear of the car features a license plate for Lord Sam Sinister and dual exhaust. The gray round thing on the trunk is supposed to house a spare tire, but it doesn't.... it's really just for looks. Two figures (sans tall hats) can fit side-by-side in the car, and their is space in the opening trunk for a briefcase. The teeny tiny mini-figure out by the front door of the house is Lord Sam Sinister... it just gives you an idea how massive the house and car really are! Fictional information on the house's history: Built in 1912, Sinister Manor is one of the last houses built in the Victorian Style of architecture in Ironwood county. It was built by Lord Gregory Sinister for his family, and features one thing not usually seen on Victorian houses: a automobile garage (it was added later on in 1918 when Sam Sinister returned from the Great War.) The house was left to Gregory's family, (his son Sam Sinister & his sister Alexis Sinister) upon the elder Sinister's death of a stroke in 1913. Sam Sinister went on to serve in the British army in World War I, losing his left hand in the conflict and replacing it with a iron hook. When he returned from the conflict Sam set about continuing his fathers tradition: collecting treasures and precious artifacts, through legal and illegal means. The collection was stored in the Attic of the sinister Mansion until it became too large and was moved to a more secure (and secret) location. Thoughts? Complaints? Questions? Feel free to post them! Main Post Edited 2/14/17: added new pictures of the building and the new car. LDD file for both car and house available here.
-
Hey, Here's my first Iron Man MOC in LDD. It's Malibu Mansion from Marvel films. 473 pieces. Pictures: Front Back Side
-
Hi everyone! I am new here. My reintroduction to Lego started with the Monster Fighters Haunted House. Then I got interested in Architecture, and Superhero figures. I also love the "home assessories" Lego items.
-
Hello! I am back with a new townhouse/mansion MOC. It is inspired by the official LEGO Simpson's House set; however, I found that the set was too suburban to fit well with my urban city, so I decided to take the essence of the house and transform it into a modular building. IMG_9676 by Topper (TT for short), on Flickr Here is the front of the exterior, featuring some SNOT technique and a simple, green door. IMG_9693 by Topper (TT for short), on Flickr This is the first floor interior Thank you so much for the feedback, I really appreciate it. I just wanted to include the spirit of the Simpson's house into my city, as well as fulfill my girlish desires to have a dollhouse made out of Lego bricks. Thanks again, and if you would like you can see this creation in more detail on YouTube at: ... Or Flickr at: https://www.flickr.c...157656628227885
