THIS IS THE TEST SITE OF EUROBRICKS!
Search the Community
Showing results for tags 'modelteam'.
Found 15 results
-
Welcome to my garage LEGO!!! Hello! My name is Michael. I'm a Builder from Russia, I love muscle cars! I'm back! 🎉 This year I wasn't up to legos, but I couldn't leave 2024 without models at all, and since the beginning of November I've been working on an extraordinary truck! This time, the equally legendary KAMAZ 5410 The entire model is based on exclusive wheels and a front beam developed in conjunction with the Boyar corner and custom polycarbonate fenders (handmade). The cabin was modeled in 3D back in the 23rd year, so there were no difficulties with it. I took the chassis from the Urals and adjusted it to the necessary parameters of Kamaz, the difficulty arose only with the spare tire, it clashed with the gearbox, and the gearbox with the Boom. It was necessary to make sure that the wheel did not protrude beyond the dimensions of the rear axle and did not hang down too much, as a result, the gearbox was placed horizontally, but the wheelbase still had to be slightly increased in order to install a sliding gimbal. The front beam was designed with a transverse angle of inclination of the pivot, so that the wheels would not fold up like a house, since the tires are narrow. Maneuverability is also improved. Description: -Drive the buggy motor -Steering GeekServo -RCBric Management -6x4 drive -2-speed transmission (the lever is duplicated in the cabin) -The steering wheel turns with the wheels (and with the cabin raised) -Working V8 -The doors, hood and sunroof open, the cabin rises -Door locks -Semi-automatic saddle -Detailed interior -Weight: 2.5kg Length: 53cm. Instagram: https://www.instagram.com/lego_muscle_garage/ Join my group in VK: https://vk.com/legomusclegarage I wish you a good mood, faith in miracles and fulfillment of wishes, happy and joyful days. Get inspired and create! Happy New Year 2025! -
hello hello guys im at the moment also working on a similare crane, a ltm 1050/1055/1060 a mixder of those three. it has one axle less, but im trying to implemte crape steering too the all wheel steering, also im building it as a all axis driven vihicle. problem now is not the switching between the two steering modes, but the axis that connect the transmission to the gear rack thats steering, because there is just to too much play at the end of the system. important to know is that im building this with flying axis and at the end of the transmission i have used a wormgear and a 20 tooth gear so the play build up between the 20 tooth gear and the gearrack at the end of the system. So my question is how to get rid of that play, and im pretty sure there has to be a sulotion because im very certain im not the first person who has build a model with flying axis that are steered -
Custom produced by FTF (Floor Truck Factory) using components from around the world, the truck was first put in use in 1989 by the Roseboom company. After switching owners and company the truck is nowadays beautifully restored in his old glory. After finding images of the restoration I fell in love with the color scheme and the challenge was set to build this beauty of a truck. Tan, red, sand green and dark green - Flickr The cabin tilts to reveal the V8 detroit diesel engine - Flickr Fully detailed interieur - Flickr The truck is combined with a Scheuerle EuroCombi Hauling a humongous dark red beam. The final model is build with full suspension, working fifth wheel, opening doors, cabin tilt and remote controlled with Sbrick. The trailer has a mechanical steering controlled by the two turntables the beam rests on and a detachable and operatabel gooseneck Dark red combines perfectly with the truck in my opinion - Flickr Yes, it is a long truck.... - Flickr The trailer comes fully equipped with extra weight and tools - Flickr Most of the details have been taken care of - Flickr PS, Yes the rims are painted. -
Welcome to my garage LEGO!!! Hello! My name is Michael. I'm a Builder from Russia, I love muscle cars! Cadillac Fleetwood Brougham 1994 The last of the classic full-size rear-wheel drive Cadillac frame sedans! Description: - Drive - 2L motors - Steering - Servo - Power Supply - Small BB - Independent suspension - The steering wheel turns with the wheels - Open the doors, hood... - Well-designed interior and space under the hood - Weight 1910 grams Instagram: https://www.instagram.com/lego_muscle_garage/ Join my group in VK: https://vk.com/legomusclegarage All photos on the link: https://bricksafe.com/pages/Michael217/cadillac-fleetwood-brougham-1994- Enjoy your viewing! Rate, comment! Thanks!)
-
Welcome to my garage LEGO!!! Hello! My name is Michael. I'm a Builder from Russia, I love muscle cars! Hummer H1 1992 Hello everyone! So I have completed my next project, the merger of technology and system! This time I have collected a living legend of Hummer H1! Description: - Drive - 2L motors - Steering - Servo - Power Supply - Small BB - Independent suspension - The steering wheel turns with the wheels - Open the doors, hood... - Well-designed interior and space under the hood - About 2000 parts Instagram: https://www.instagram.com/lego_muscle_garage/ Join my group in VK: https://vk.com/legomusclegarage All photos on the link: https://bricksafe.com/pages/Michael217/hummer-h1-1992 Enjoy your viewing! Rate, comment! Thanks!)
-
I decided to join the Technic Studless Recreation competition. Someone starts building a car with a chassis, but I decided to start with ❤ The heart of the model will be a 4-cylinder opposed engine. -
September 2013 the first WIP picture of my crane was uploaded, now 3,5 years later I dare to say the model is finished. In all these years I have faced a lot of technical challenges with this model, thought most of them are solved a few remain annoying (steering and drive). In the end I consider the model done and decided to learn from the not fully working features to improve on in later builds. Other tough challenges that were beaten in this model are: Fully capable outriggers that lift the complete model of its axles, Lift of the boom using a brick build linear actuator, fitting tens of meters of wire in the model to power all the led's. A full list of the features can be found at the end of the post. Even though I consider myself quite a purist a few elements of this model are not from TLC. For control the model uses 5 sbrick's together with a custom profile, enabling all the rc features I needed with a good signal . Since the PF led's are way to expensive and dull I decided to solder my own led's with the right color and a good brightness. The stickers are supplied by JaapTechnic. More pictures can be found on my flickr Full road configuration with 14.4 tons of ballast weight. The spreader plates are stored on the back. All the light are controlled by the Sbricks, this includes the indicators, beacons and reversing lights. Yes this actually lifts. With the jib mounted the piston is able to erect the then 1.7 meter boom to full height. Fully erected the model stands 2.6 meters tall. Even though the model faces a lot of technical challenges all of the details are added including full interior in both cabins. Full feature list. Motorized functions: Drive, Steering, Outriggers front and back, Compressor for the outriggers, Slewing, Boom lift, Boom extension, Winch, Cabin lift. Light functions: Normal driving lights, indicators, hazard lights, beacons, reversing lights, working lights on the superstructure. Other functions: All cabin doors open, Openable storage doors on the back, Full suspension, Folding jib with multiple angles, Folding safety railing.
-
Welcome to my garage LEGO!!! Hello! My name is Michael. I'm a Builder from Russia, I love muscle cars! Dodge Challenger 1970 This time, I collected an opponent for the Barracuda, in real life, both cars were assembled on the same base, outwardly they differ only in front and rear) I did not copy, but made a completely new model from the chassis to the body and developed it to more recognizable features, the design became more complicated, and with this the number of parts increased hundreds of times! Because of the large tilt of the whole car, it has got a castor, maneuverability is very good, as well as speed, because under the "hood" is a Buggy engine) Description: - Length 46 cm, weight 1550 g, 2013 details! - Drive - 1 Buggy motor -- Steering - Servotronic - Power supply-Small BB -The steering wheel turns the wheels -Open doors, hood... - Fashion salon -Nitrous oxide! - The receiver is hidden under the torpedo - Roomy trunk ( two PF remote controls go into the light one) - Front independent suspension with positive castor -Rear axle with Panar traction is installed - A lot of system Instructions are available for purchase! 9$ - https://rebrickable.com/mocs/MOC-66388 Instagram: https://www.instagram.com/lego_muscle_garage/ Join my group in VK: https://vk.com/legomusclegarage All photos on the link: https://bricksafe.com/pages/Michael217/dodge-challenger-1970
-
Welcome to my garage LEGO!!! Hello! My name is Michael. I'm a Builder from Russia, I love muscle cars! Dodge Charger 1970 Drift Project This is an updated Dodge risen from the ashes, returned in a new guise and a powerful filling! Description: -Godzimotor Drive -Steering Geekservo -RCBrick Management -Independent front suspension, rear axle -Working V8 -The steering wheel turns with wheels -Doors open, trunk -Detailing in the cabin -Manual mechanism for opening the headlights from the interior -Weight 1.7 kg, Length 49 cm. Instagram: https://www.instagram.com/lego_muscle_garage/ Join my group in VK: https://vk.com/legomusclegarage All photos on the link: https://bricksafe.com/pages/Michael217/dodge-charger-1970-drift-project Enjoy your viewing! Rate, comment! Thanks!)
-
Hello everyone! I present to your attention the MAN F200 truck model. The model is made in 1:20 scale. XL motor is used for movement, servo motor is used to turn the front wheels. The truck has a working suspension on all wheels. The second axle of the truck can be lifted. Instagram:https://www.instagram.com/legov94/ Youtube: https://www.youtube.com/channel/UCZYK7_ZVxMqp85JoDGo85mw Thank you for watching! -
Hello everyone! Scania R730 racing truck model for circuit racing. The creation was based on a serial Scania R truck truck with minor alterations: the engine was moved to the middle of the frame, and a spoiler was added. The model does not have a real prototype, the car is rather a collective image of racing trucks. The truck model is approximately 1:20 scale. It has the following functions: movement (carried out by means of a drive to the rear axle by 2 L motors), L motor is used to turn the front wheels. In the cabin there is a small battery pack and a sbrick. Additional features: two-speed gearbox, working steering wheel in the cabin, "neon" illumination of the bottom of the car. Instagram: https://www.instagram.com/legov94/
-
Scania LK 141. The model is made in the scale of 1:22. Has a suspension on all wheels. XL-motors are used for driving and a servo motor for steering model. The truck is equipped with an automatic trailer hitch. Instructions: https://rebrickable.com/mocs/MOC-48552/LegoV94/truck-skania-lk-141/#comments Instagram: https://www.instagram.com/legov94/
-
Hello Everybody My Name is Dani, im a 36 years old LEGO fanatic from Zürich Switzerland and im a brandnew eurobricks member. ;-) Im proud to introduce you my Liebherr R 9150 excavator in the scale 1:13. Yeah i know, the mining machines from Liebherr are white in real, but i like the yellow Liebherr color design much more. It is „only“ a scale model and has no functions, motors etc, cause the construction is just too heavy. I dont know the wheight exactly, but i think its about 40 pounds, this thing is HUGE. As you can see, i used alot parts, only for the black track-chains about 1200 pieces. I worked on this Monster since 3 years, of course with a lot breaks between. Effort in hours: i guess about 300. Please let me know what you think. If you have any questions, just ask. ;-) -
Hello everyone! I'm glad to introduce you my tribute to 10187 set! Long story short: I'm a big fan of the ModelTeam series, and always wanted to build a MOC in this style, but I did not find inspiration. And a couple of weeks ago, I found xx1Andi's LDD file with PF modifications of the 10187 set on the Rebrickable. That MOC did not have a front suspension, complex steering system or any other technic features, but helps me a lot in understanding how all the electrics should be placed in the chassis. So I just started building the chassis with a new Control+ electrics, keeping in mind @Madoca 1977's offroader suspension and driveline setup The main goal was to preserve the maximum appearance of the original with the maximum count of functions inside. In the end I was able to completely save the interior, all interior and exterior details and leave a place for 3 motorised functions and manual one. I'm satisfied with final performance: model able to crawl in the forest and even on some rocks. With the help of the winch Beetle can move forward in almost every situation (within reason of course, it's not a lightweight crawler). On the high gear it's fun to see how suspension fulfills little bumps on the gravel road. Red color - dual driveline via 2x C+ XL motors that are not connected to one another, which allows car to simulate open differentials (or turn around like a tank). New planetary hubs can handle with heavy weight (2250 g), even using RC4WD tires for 62mm wheels with the excellent grip properties of rubber. Yellow - steering with a C+ L motor and common gear-rack setup, nothing special. Purple - winch with 20:1 ratio via C+ L motor, capable of lifting a vehicle’s weight on a steep slope or in the air. Winch motor placed between upper front suspension arms, leaving space for some scale details under the hood (like windshield washer reservoir) Blue - torsion bar suspension. 10L axles working like torsion bar with lower suspension arms and limiters firmly fixed on them. Suspension stiffness is adjusted by changing the distance between the arm and the limiter. It's the most simple and compact solution for this scale and weight. Green color - 2-speed gearbox (1:1 and 3:1 ratios) with manual (HOG) switching via small actuator placed between rear suspension arms and driveshafts. Simple and stupid solution - just gears in the frame, that pulls them along the driveshafts with a help of actuator. Nothing special. All these technic parts are connected only by technic bricks and system plates. Mainly by plates There was not so much free space for proper bracing, but some tests and crash-tests shows me that all these system plates are tough enough to handle some jumps. But the main headache was a new C+ hub. That was very hard to hide this enormous brick into the interior, so I was used to make holes in the backrest of the rear seat to fit the C+ hub's "ears". But otherwise I’m happy with the amount of details saved. I love final ModelTeam+Crator appearence Thank you for watching and feel free to leave comments below! Hope you like it! Also you can find more photos here -
As rm8 mentioned, this month is "Month of Russian technics".So, let me be the 3rd with my new work that took me 8 months to do - Russian famous KAMAZ truck. Features: Front lights Scale - 1:16.7 RWD (like the real one) Width - 18 studs Ackerman steering (solid suspension on the front axle, based on 2Lego`s design) Differential on the rear axle (Classic technic suspension, don`t know how to name it) Many SNOT solutions like the front grill and the roof that were a very big headache. As for the technical solutions, the thing I`m very proud of is the steering mechanism.It was the biggest problem due to the weight of the cab, but the idea with using a minifig part decided it. Just to add, I have used some ideas from this work : http://www.brickshel...ry.cgi?f=304715 My model: KAMA3 43253 by DB_Kit Fisto, on Flickr 1 by DB_Kit Fisto, on Flickr 3 by DB_Kit Fisto, on Flickr 4 by DB_Kit Fisto, on Flickr 2 by DB_Kit Fisto, on Flickr 5 by DB_Kit Fisto, on Flickr 6 by DB_Kit Fisto, on Flickr 7 by DB_Kit Fisto, on Flickr 8 by DB_Kit Fisto, on Flickr
