THIS IS THE TEST SITE OF EUROBRICKS!
Search the Community
Showing results for tags 'passenger'.
-
This Blacktron 1 colored passenger train is modeled after the General Motors Aerotrain concept of 1955. I modified the engine to have two bogies (one of which can be replaced with a 9V motor to power the train) instead of the one bogie and one fixed axle of the original. The passenger cars were lengthened from 16 to 24 studs and Jacob's bogies placed in two spots to lessen the part count. (Yes, it bears more than a passing resemblance to a certain other space train of mine... let's just say some espionage was involved concerning the CS design plans for that train!) The train will be used on my Blacktron space base, shuttling VIP's around on tours of my base. Alternatively, it could be used to get personnel to / from the base and the off-site living quarters. (you can read more about my Blacktron fleet in it's own thread in the Sci-Fi forum.) The windows in the train were difficult to get right, but I managed to attach them. Inverted trans-yellow 2x2 slopes that would make this way easier are coming in a set releasing in March, but I'm not waiting that long! (The tail car is currently missing a few parts for the roof.) The cab roof is removable and a driver can be placed at the controls, but the coaches are totally impossible to get into due to the construction techniques used. (Also, two control panel double-cheese slopes, two 1x1 number tiles, and two radiator donut tiles are missing from the model, among a few other parts.) As for when this will be built in the real world, it will be soon. The last few parts for the train were ordered 1/14/25. Update 1/15/25! This space train station (named 'Base Terminus') is to be used with my retro-futuristic Blacktron passenger train to get staff and VIP's to and from the space base. (Some printed parts are not in the picture, but they will be when it's built in real life.) Thoughts? -
"Sometimes, late at night, you can hear the whistle wail with a spooky, screechy sound like a wheel gone off the rail; and up in the smoky clouds, you can almost recognize the ghost of a crazy engineer with fiery cinder eyes; I say, Whoo-whoo! Can't you hear the haunted train? Whoo-whoo! Waiting on a haunted train I'm gonna, crash that engine, you know, only sticks and stones and old conductors' bones remain..." This steam loco was from the first animated train cartoon I ever saw when I was very small (three years old, from what I'm told), and is one of my favorites, easily beating The Brave Engineer (1950's Disney cartoon) and only being bested by The Polar Express film! I got the basic looks for the model from a single screenshot of the 1990's Nickelodeon cartoon show "Hey Arnold!". The engine seem to be based on Norfolk and Western K-1 class 4-8-2, but is apparently owned by Great Northern as evidenced by the tender writing. You can read more about the haunted engine, it's known story, and even potential theories for why it crashed here on the Arnold wiki. (yes, that's a thing, and credit to Paul Welch on Flickr for bringing this info to my attention.) The following text is from the wiki page for the episode: "As shown in the episode of the same name (Haunted Train), the legend concerns the phantom locomotive, Old Engine 25. Forty years ago (from original broadcast date, so November 1956), during a movement from the train yard to Union Station, Engine 25's engineer suddenly went insane. Defying signals and warnings to slow down, he intentionally derailed the engine and its train which slid down a high embankment. However, no wreckage was found beyond the engineer's severed hand, still clutching a part of Engine 25's throttle. According to the legend, the engineer drove the train straight to the fiery underworld, and now once a year on the anniversary of the engine's derailment, returns aboard Engine 25 with the intent of collecting new passengers to return to the underworld with him." There is even a song used over the closing credits of the episode, sung by the ghostly crazed engineer who drove his train all the way to hell (see first portion of post for that song!) And yes, I know a steam engine is not a entire train... it may partially make up a train, but it itself is not a train. The front of the ghostly locomotive. The engine's boiler is a highly modified version of one seen on this Rebrickable MOC by @Plastic_Goth (only the boiler is partially reused, I designed everything else myself). The rear of the engine. Inside of the engine's cab. The baggage car. Three coaches. The observation-lounge car. Yeah, I know the engine from the Hey Arnold! cartoon episode 'Haunted Train ' only had a ghost engineer. But I thought a ghostly conductor would be a good addition, and I just couldn't resist. You will note the loco's fireman is not present here; he must've jumped off just before the wreck and survived, so he isn't a ghost. (some fan theory's say Arnold's grandpa was the fireman, as he did work for the railroad and saw first hand what happened during the wreck) ...Would you look at that! It's the anniversary tonight of the wreck! Won't you go on a lovely train ride with me? Thoughts welcome! UPDATE 1/3/25: Whole post updated with pictures of the train, including the new passenger cars!
-
These two rail vehicles are a type of railcar called a Galloping Goose, and are slightly inspired by seven real vehicles built and used by the Rio Grande Southern narrow gauge railway back in the 1930s to 1950s, when the little railroad was torn up. Six still exist in original form, with one being a reconstructed replica. These machines are really something Doctor Frankenstein would love - a bus body or boxcar welded to a road vehicle (usually a Pierce Arrow limousine, though bus bodies were later used) for the front end, with train wheels added underneath. My interpretations of this type of vehicle are built in freight (red) and passenger (blue) versions, even though the real-world ones are all silver / light gray painted. (NOTE: This vehicle's front half was inspired by @hachiroku and his Indiana Jones "Raiders" staff car MOC from 2019.) The rear of the Galloping Geese. As a play feature, you can open the doors to the drivers compartment and place a driver at the wheel. The back half of either vehicle is not meant to be accessible. The free LDD file for both Galloping Geese can be found at my Bricksafe page. I'm currently building the blue Galloping Goose in real life, so keep your eyes peeled for that separate thread later! Thoughts, questions, complaints, and suggestions welcome!
-
(Built and designed for my father, not for me) The Disneyland engines with consists in order from Left to Right: 4-4-0 "C.K. Holliday" (engine 1) from 1955 pulling the my semi-fictionalized version of the Retlaw 2 freight train 4-4-0 "E.P. Ripley" (engine 2) also from '55 is pulling the post-1971 fictionalized Retlaw 1 passenger train 2-4-4 "Fred Gurley" (engine 3) started service in 1958 and is pulling the Holliday Blue excursion train 2-4-0 "Ernest S. Marsh" (engine 4) began service in 1959. Most of the 4-4-0 models use 9v motors, as my father has that system as his preferred train propulsion type... and GatewayLUG uses the 9v style-track / motors too, so it makes it runnable at shows. The Fred Gurley is not able to be powered this way, sadly. C.K. Holliday 4-4-0 and Retlaw 2 freight train There were two trains at Disneyland opening day in 1955, and these were the Retlaw series. Retlaw 1 was the passenger train which was pulled by E.P. Ripley and consisted of one baggage, four passenger cars, and the observation car. Five of which are no longer used or were sold. (but the observation car is still used - as the Lilly Belle parlor car as seen in the official set) Retlaw 2 was the freight train, pulled by the engine as shown above - C.K. Holliday - and consisted of three cattle cars and three gondolas, plus the caboose. As you may have noticed, I chose to only use two cattle cars from that train, and no low-side gondolas... There are no pictures of those as far as I can tell before the freight cars were all converted into another train type, the same as are in LEGO set 71044. The tanker car and coal hopper are my own invention. The two cattle cars. The two doors on each side of the identical cattle cars fold down. The roof sections come of now as well. As you can see, no seats are inside these cars as there were none installed in Retlaw 2 on opening day 1955! The two gondolas have been shortened from the original versions on the original Retlaw 2, but they are pretty close to it in looks! The caboose. I made up this car, as I couldn't get the real four-world axle caboose to look good in LEGO. The caboose has a removable roof too. E.P. Ripley 4-4-0 and Retlaw 1 passenger train (fictional post-'71 rebuild) Retlaw 1 was the passenger train which consisted of one baggage, four passenger cars, and the observation car, which were pulled by E.P. Ripley on opening day in 1955. Five of which are no longer used or were sold. (but the observation car is still used - as the Lilly Belle parlor car as seen in the official set) However, in this fictional revised version of the train, this retirement didn't happen, though they were modified to suit side-seating. The real Retlaw 1 was originally a yellow painted train, featuring front facing seats until it was mostly retired in 1971. The observation car of Retlaw 1 then became a parlor car known as the Lilly Belle after Walt Disney's wife Lillian. This fictionalized train is in the revised, post-1971 color scheme of the Lilly Belle, (which is in set 71044) and also has two passenger cars plus a baggage car with opening side doors. These cars all have side facing seats, as if Retlaw 1 were around and used in modified format after the 1971 overhaul of the Lilly Belle. As a side note, each of the cars feature a removable wall for getting at the inside details, as in set 71044. My revised version of @TJJohn12's MOC of the Disneyland number 2 steam loco. I made it using parts ordered by my father, but it's still missing the 9v motor in this picture. As you can see, the loco is mainly dark blue, as it swapped colors with the originally dark green real-world engine. This is because the C. K. Holliday model in the Disney train Lego set is also color swapped, from what should be dark blue to dark green. So, basically, Lego used bits from both engines for the set, and we continued this trend here. The baggage car features two sliding doors in red, though other colors are an option to stand out more. (I prefer black doors, but that's not prototypical!) The side wall comes off, as it does on all the cars, to reveal seating. In this car, that means luggage room and two seats. The two coaches are identical in every way, and are also quite similar to the parlor car at first glance. The inside features side seating, as in the Disneyland park... this also allows for easier moving of figures, and placing them in any of the five seats per car. This car is in the LEGO set 71044, but I thought you guys would like to see it alongside everything else. Fred Gurley 2-4-4 and Holliday Blue excursion train The Holiday Blue train was added in early1966 to replace the original Retlaw 1 passenger train which was going to be being pulled from service due to slow loading / unloading at stations. (It is also notable as the last consist added to the Disneyland Railroad.) Here it is being pulled by the Fred Gurley, also known as Disneyland number 3. Here is my Dad's (now finished IRL!) third Disneyland loco, to accompany the C.K. Holliday one in set 71044 and the E.P. Ripley MOC I just finished for him: it mimics the real world Fred Gurley pretty well too. The real 2-4-4 loco has been at Disneyland since early March of 1958. This paint scheme isn't 100% accurate (black boiler / black domes are dark green / red here), but IT IS in line with the modification my Dad and I have already done to the other locomotives. The roof lifts up as normal for this series. This loco is one of my Dad's few unpowered engines, as it is impossible to fit a 9v motor underneath... or any motor block, really! The "Holiday Blue" car by themselves, with only tail-lights added to them. The Disney train my father bought has added three Bricklinked cars with some new cartoon passengers courtesy of "The Minifig Shop" LEGO resale store in Kirkwood, Missouri. Still need get the 4th car and the Lilly Belle car built from the actual set, and add the Star Wars characters to it and the empty one on the right. I should probably put Donald Duck as a he fireman as seen in the cartoon short 'Out of Scale" from the late 1950s. Ernest S. Marsh 2-4-0 Just to complete the first four locomotives from Disneyland, here is Ernest S. Marsh. It's a 2-4-0 based off the 1871 Denver & Rio Grande loco number 1, "Montezuma" and was readied for service at the California park for the first time in late April 1959. This LEGO version is also inspired by LEGO set 71044 for the two-axle tender, piston design, and general look of the engine, while the boiler design originally hails from set 7597. The tender is powered by a 9v motor, and weighed down for traction by a standard weight brick. Notes on the post and future additions: Real life pictures will be added whenever possible. Also, Disneyland RR Number 5 - Ward Kimball - is a relative newcomer to he park and is a 2-4-4 like the Fred Gurley. It would not be interesting to have two more identical locos on the roster, so it is not included, and as it arrived in 2005, it's not quite from for the time period my dad and I are attempting to model. (He is kind of not sure if he wants another loco after Fred Gurley, so the 2-4-0 steamer Ernest S. Marsh might not get built either!) Any questions, suggestions, or complaints? Let me know below! EDITED 8/26/21: added Fred Gurley (Disneyland number 3) steam loco's real world MOC pictures to this post!
-
NOTE: The steam loco itself began life as a 2-8-4 Berkshire type built by @Plastic_Goth and the instructions were purchased from Rebrickable as seen here. To make this steamer my own, I upped the wheel count of the original locomotive by another leading axle, making it into a 4-8-4 Northern-type from the original 2-8-4 Berkshire as built in the instructions. The piston / wheel assembly is entirely my own work, as is the completely new 7-wide tender and the train the loco pulls. The whole train, with the steam loco and five cars - a baggage car, three coaches, and a observation lounge. This engine originally pulled my MOW (Maintenance Of Way) train when it was built three years ago. Now, it's been upgraded to passenger train service. I also updated the front of this 4-8-4 steam loco model to have a smaller cowcatcher, as opposed to the original one-piece cowcatcher I originally had installed. The rear of the loco, which is lettered for my railroad, Brick Railway Systems. Inside the cab of the engine. The baggage car. All five cars use roller-skates for door handles. These three identical passenger cars are also in the train. The observation car on the tail end of the train uses four of the new 3x3 macaroni brick parts in trans-clear for the back window. These parts are actually the reason I didn't upload this a month or so ago when the rest of the train was finished - I had to wait for them to arrive from Pick-A-Brick. Thoughts? Comments are always welcome!
-
Originally, me and my dad made me a train way back in the early 2000's as my first train MOC. (you can see it as the last photo of this post) At my request, he got rid the bright colors of the original 1980's train sets it was inspired by with more subdued tones. The black and red are what became the standard color scheme for my fledgling railway for a good many years. And now, two decades later in 2024, I'm updating this original train again. This time, I've Americanized them. Before they were more European looking, with a baggage car at the rear - now, they will have an observation car with a platform at the back and the baggage car added to the front of the train instead. I also added a updated 4-6-2 steam loco with a 7-wide cab and tender inspired by the works of @SavaTheAggie. I really liked the cab and tender from from the 2-6-2 steam loco I recently built (which was originally a Sava design) so I decided to make another engine that uses them too. I took a 4-6-0 frame (originally from the 2023 Hogwarts Express loco) model, stretched it out a bit and added the 7-wide cab to make it a 4-6-2 Pacific (the 2-6-2's tender design was stretched out quite a bit too!). I also put on a bucket as a funnel like in the Orient Express LEGO set. Rear of the loco, with the stretched tender design mostly taken from a few Sava models. (his 2-6-2 for the basic look, and his 4-6-0 for the stripes) BRS stands for Brick Railway Systems, which has been my railway for twenty years. This anniversary prompted me to make this revised MOC. Inside of the cab, which has also been lengthened by a stud since the last time I showed it off. Inspired by set 7722 (steam cargo train set) and the red / yellow guard's van. These three coaches were inspired by the red and blue coaches of set 7715. (Push along passenger train) The observation car is my own design. ...and here is what it all looked like originally. (picture circa 2017) The diesel at bottom left is long scrapped, but the original 0-4-0 steamer survives to this day. This tiny loco was inspired by set 7722 (steam cargo train set) while the steam engine's tender was inspired by 3742 (My Own Train series) from 2001. Thoughts?
-
This long journey started in November 2021 with a used copy of Toy Story 3 set 7597 - Western Train Chase - bought from a local Lego resale shop here in St. Louis. I quickly expanded the loco to have a tender, then working pistons, and finally rolling stock. I was then inspired by the original 1955 engines from Disneyland for a second coal-burning loco, (the C.P. Jupiter and U.P. 119 from the Last Spike Ceremony of 1869 was also an inspiration!) and then awhile later a 4-2-4T styled after the C.P. Huntington. (This became a 2-4-4T last December.) The 4-10-0 was originally 8-wide, and was built before I got the 7597 set in August 2021. I never liked it in eight wide, (I never even photographed it in that form) and when I was taking apart all my eight wide MOCs recently, I took pity on it and converted it into 6 wide to preserve it. Then, I took photos of all the locos... I still haven't finished some of the freight cars, so the rolling stock will be added later. (I promise it won't be three more years!) All rolling stock added 6/1/24! The trains all together, minus the rolling stock. This 4-4-0 pulls my passenger train This was the first engine finished. Rear of loco No. 1. It's styled as a mid-to-late 1860's wood burning loco. You could also say it is likened to the Jupiter and the Gov. Stanford of Central Pacific Railroad fame. The passenger cars were styled after three sources: the one in set 7597 - Western Train Chase, set 10015 - Passenger Wagon, and the Disneyland and Santa Fe 'Retlaw 1' MOC's made by @TJJohn12. This is my coal burning 4-4-0 (numbered 8), and pulls my railroad executive's train. The front of the coal-burning locomotive. This MOC is modeled after a early-to-mid 1870s loco, but it could be considered to partially resemble the Union Pacific 119 from the Last Spike ceremony of 1869. The combination baggage / sleeper car is for my railway executive's train. This car's purpose and paint scheme is actually inspired by a car owned by the (fictional) Wasatch and Nevada Railroad in the 1975 Western / thriller 'Breakheart Pass', based off the novel of the same name by Alistair MacLean. This private car was based off the same source material as the tan sleeper / baggage car, which is the film Breakheart Pass. In the film, the car was named 'Fairchild', after the fictional Nevada Governor played by Richard Crenna in the film. As to why Abraham Lincoln is standing at the back of the car even though he is actually long dead by the 1870's, I have but one answer: because it looks cool to have him there! The 2-4-4 tank engine I'm using as a switcher, and is seen here moving a cut of freight cars. In my fictional backstory I wrote, loco No. 4 was originally a 0-4-4 Forney loco that soon needed a leading two wheel pony truck to operate better at speed and keep wear down on the front set of driving wheels. Of course, in reality, it was first built as a 4-2-4T like the C.P. Huntington you can still see in the California State RR Museum, or at you local Zoo / amusement park, as smaller-scale replicas are made by Chance Rides for places like that. This coal-hauling hopper car was modified from 2007 set 10183 - Hobby Trains - specifically, it was alt model 28 - Gondola. The tanker car you see was inspired by part of the 1997 set 2126 - Train Cars. This green boxcar was taken directly from 2011 set 3677 - Red Cargo Train. The caboose was inspired by set 10014 - Caboose - and set 7597 - Western Train Chase. This monster of a steam engine hauls my freight train. This loco (No. 3) is modeled after the only 4-10-0 to ever run on US Rails. This, of course, was the 1883-vintage El Gobernador. (Spanish for "the Governor") The real locomotive was a colossal failure, but this one is (in my fictional backstory) built from the plans with the mistakes corrected, making the loco a good drag-freight engine. The rear of the engine, with it's tender being two studs longer than the others. The cannons on this flat car were inspired by 2013 Lone Ranger set 79106 - Calvary Builder Set. This drop-side gondola was inspired by the one in 2022 set 60336 - Freight Train. This red boxcar was lifted from 2006 set 7898 - Cargo Train Deluxe. The caboose was inspired by set 10014 - Caboose - and set 7597 - Western Train Chase, but done in yellow instead. ...I just realized these locos are almost all modeled after CP engines! This was totally accidental, and wasn't noticed until I made this thread. Anyway, that's all I got. Comments, questions, and other things like that are welcome!
-
Please NOTE: There never was a Ohio Pacific railroad in the real world, but in my fictional universe, it never made it to the California coast, just to Denver, Colorado at it's western-most terminal with New York City being it's eastern-most point. As such, this locomotive is entirely fictional, with the paint scheme for the coaches inspired the real-world Missouri Pacific. This model was inspired by user @brickblues and his 4-6-2 Mallard-styled steam locomotive. My version of the engine is a 4-8-2, which means it has four leading, eight driving, and two trailing wheels, making it a Mountain type locomotive. The engine is streamlined with a blue shell around the boiler with tan and white stripes in places. The tender is supposed to say "Ohio Pacific" in printed 1 x 1 tiles, while the cab is supposed to say 6093 (also in printed tiles). The cab of the loco should features this print for the firebox door that is lacking in the LDD file. The baggage car features opening double doors for the baggage end and single doors for the passenger end. The three coach cars are identical with two opening doors at either end. The observation car features a open-air rear platform for looking at the passing scenery. This train is on the to-build list (which is getting longer all the time!) in real bricks. As usual, comments, questions, complaints, and suggestions are always welcome!
-
From 1919 to 1962, the Chicago, Milwaukee, St. Paul and Pacific Railroad (known as the Milwaukee Road) had these five General Electric-made behemoths pulling trains under the wires from Chicago to Seattle. They were called the Bipolar's for each of the locomotive's 12 motors had only two field poles, mounted directly to the locomotive frame beside the axle. The motor armature was mounted directly on the axle, providing an entirely gear-less design. These locos were so powerful they could out-pull modern steam locos, and what used to take two steamers took just one bipolar. However, after a disastrous 1953 rebuilding by the railroad's company shops (who had no clue how to work on a electric loco) the engines were prone to failures and even fire. And so, in 1962, four of them were scrapped with the lone survivor, numbered E-2, towed to the Museum of Transportation in St. Louis Missouri, where it has sat silent even since, as seen above. The slightly stylized LEGO version of the locomotive was inspired by a 1999 version of the Bipolar electric locomotive built by user legosteveb and by a digital-only design by @Sunder. With this updated, more curvy model, the classic orange and red scheme was impossible, and so as the yellow and red of the previous model type. Thus I was forced to invert the red and yellow to the fictional scheme seen. (The black number boards in front and rear should say "E2" in printed 1 x 1 tiles.0 The loco frame is split in three sections as per the original engine. The front and rear section can pivot slightly to make the engine go around curves. Since the last uploading of this model, the wheels have been re-arranged into two groups of seven (they are joined near the end of the frame, with the exact middle section floating freely between the two ends) and the body of the engine has been extended for a total magnet-to-magnet length of 70 studs. The model should perform well on R40 curves / switches, as this picture attests to it's flexibility.... though until it's built in real life, it will remain untested. The newer model is only 1 plate higher than the previous version, with the same length and width. As you can see, it's my longest single locomotive yet designed with 14 axles total. (I'm not 100% sure my articulation attempts in all the boogies and the frame were enough to work on standard LEGO track, but I guess I'll just have to see when it's built in real bricks latter this year!) The passenger train, and the rear car in particular, were inspired by the Milwaukee Road's Olympian Hiawatha service from Tacoma, Washington to with the rearmost car being a Beaver Tail observation car, which were out of service by 1961. (you can read more about these odd-looking cars here on this Wikipedia page.) Actually, I'm not sure the Beaver-tails were ever used all the way to the West Coast on the Olympian, but since it's LEGO, who really cares! That's all I have done for now, and as usual, questions, complaints, comments and suggestions are always welcome! (real life pictures coming to this topic as soon as possible, but the LDD file for the whole train is available here at Bricksafe)
-
I don't see many 4-4-2 Atlantic types steam locos around in LEGO, and even less orange-colored trains besides the TGV-like Horizon Express and SP Daylight 4449. This should fix both problems at the same time, and yes, it's build-able in this color in real life. The Atlantic type 4-4-2 (4 leading, 4 driving, 2 trailing) was the top-of-the-line express train hauler in the middle 1890's to early 1910's. Some continued right up until the end of steam in the Fifties, with the Hiawatha's of the Milwaukee Road hitting 100 MPH speeds daily with this wheel arrangement. The engine should have "3110" printed on it's cab and "GREAT WEST" on it's tender in 1 x 1 tiles. The cab of the loco with four printed gauges and the firebox door. Four identical passenger cars in matching orange paint-scheme are pulled by the Atlantic-type steam locomotive. The words GREAT and WEST are supposed to be printed on the 2 x 4 tiles on either side of the cars. Here you can see the whole train at once. I'm not sure when or if this loco and it's consist will be built, but if it is I will update this post here with better, real-world photos. LDD file available at this link here. As usual, Comments, Suggestions, Questions, & Complaints are always welcome!
-
The 4-10-4 (four leading, ten driving, four trailing) "Rainhill" wheel arrangement was so named after the Rainhill Trials of October 1829 in Rainhill, England of which the famous Rocket was the only entrant to complete the Trials. The Rainhill type was designed in 1927 and built in early 1928, though it was originally called the "Gigantic" type, but the planned Centenary of Steam celebration sealed the deal on the naming of the type. (Unfortunately, the plans for the potential celebration were postponed in July 1928 and finally cancelled one day before the Stock Market Crash of 1929.) The steam locomotive prototype of the 4-10-4 Rainhill type was painted a dark red and gray color-scheme with a light gay box on the tender and was sold by Baldwin Locomotive Works in 1928 to Brick Railway Systems, but due to technical teething troubles and because of it's unusual color scheme was nicknamed the Red Demon. The engine worked the trans-continental route on the "pan-American Limited" passenger train from New York to Los Angeles, with the Red Devil or one of it's type worked the portion west from St. Louis to Las Vegas. The Red Demon original engine (number 7957) worked this route from 1930 until being bumped to freight duties in early 1958. The engine then worked freights with it's thirty-nine brother's in diminishing numbers until this one was sidelined in 1971, the last of it's kind. The Red Demon was pulled out of the mothballs in 1973 for potential use on the 1976 American Bicentennial train but politics intervened and Texas and Pacific 2-10-4 number 610 got the job instead. After that, the engine's future looked bleak until the "Save the Red Demon 7957" Committee was formed which raised enough money to restore the engine to working order by 1978 and has kept the engine indoors and in tip-top shape ever since under the Red Demon Incorporated moniker. This company uses five former Brick Railway Systems-styled coaches on fan trips, but they are wholly owned by Red Demon Inc. The tender features the name of the railroad (Brick Railway Systems) on it's side, with a light at the rear and a ladder to the top deck. In reality, there was no 4-10-4 type of steam locomotive. It was strangely skipped over in the age of steam... none of this wheel arrangement were ever built. The name Red Demon was chosen because the 4-14-4 type of Soviet Russia was the closest analogy to my loco... except mine works fine, while the Russian one never did much as it spread the track, ruined switches and pulled the freight cars' couplings apart due to it's raw power. The second reason for the name is the Red Devil, a heavily modified South African 4-8-4 engine with a gas producing combustion system and many modern improvements. That cape gauge engine worked beautifully, but was mothballed in 2003. As of 2018, however, the Red Devil is again puling fan trip trains in South Africa! The three regular coaches, all in the same color scheme as the engine. The Pan-American Limited's observation car. The whole train. Comments, Questions, Complaints, and Suggestions for the future are always welcome! EDIT: 12/8/22: There really is a prototype for everything! I designed a 4-10-4 steam locomotive in 2019, thinking it was a complete work of fiction, as no class had been built to that wheel arrangement. Turns out, I was partially wrong - no class had been built, but one had been designed by Baldwin Locomotive Works, as seen in their online archives! It was a three-cylinder beast drawn up for a road called The Monon (otherwise known as the Chicago, Indianapolis, and Louisville Railroad) back in 1928 - not very far off my fictionalized backstory year of 1927 as written by me in 2019.... spooky, right?
-
It had been a long time since I built an aircraft, So as the last project of summer 2017, I decided to build a plane. The goal was to improve on my last plane (The Gulfstream private jet, if you remember). I wanted to add a suspension system to the landing gear, make the wings more sturdy, improve control for functions, and have the jets on the wings, and to reduce the amount of illegal connections (nearly 20). I am happy to say all of these goals were achieved; the illegal connections brought down to only 2. Here is the video: I was lucky, as the weather was really photogenic while filming/ shooting pictures. Speaking of pictures, here are some: I drew a little runway out of chalk to make some effect. In conclusion, I am so much better with a pencil Honestly, I quite happy I built this. I hope you like it is as much as I do! Please leave you thoughts, as I would love to hear them. Planes are a favorite of mine, so I will totally build another one soon. Thank you! BrickbyBrickTechnic -
This fast electric locomotive and it's train was inspired by sets 4511 (2003's "High Speed Train") and sets 4561 / 4560 (1999's Railway Express), and has been dubbed the "Sunset Streak". The orange stripe on the train can be replaced with green, blue, red, black or yellow, while the white can be replaced with black, if you so desired. This model features two locomotives, each with either red or clear lights for either rear or head end duties. This print here is for the two windscreens (they aren't printable in LDD), while the train's number tiles (12 on one cab car and 16 on the other, for example) printed 1 x 1 tiles are not there and are missing from the file. Four of this print go on each power car, (on the left and right sides) like this: <- -> This is supposed to make the classic Lego train logo in tiles, which sadly has never been available in printed form at all. Each locomotive has an abundance of control tiles and two pantographs per cab car for power pickup from imaginary wires. Also on the train is four passenger cars with no interior and four half-stud recessed doorways per car. However, as it is LEGO after all, you could easily modify the cars to have removable tops, inside seats, and even and opening doors (Emerald Night style). The LDD file is available for download here. Comments, questions, and complaints are always welcome!
-
This model was inspired by set 10199 / 10249, Winter Village toy Shop. I originally built this as an open-back building in 2013, and scrapped it in 2015 for a larger, full-bodied station. I never did forget about this model, and rediscovered it while looking for my Hogsmeade station to go with my Hogwarts Express model I had designed. The model will be finished in real bricks very soon, and as such I have tweaked it again by adding stairs to the top floor where the station master's office is. The track side also features a space for eight printed 1 x 1 letter tiles to be placed to designate the station name along with plenty of passenger seating along the five-track-long platform. That's three tracks longer than the new Winter Village train station, and mine also features a rear wall and second story! Here is the street side of the station. This side includes an overhang that protects passengers entering the structure from the rain along with a wheelchair / luggage ramp access to the platform. The model features two modular lift-off levels and two split-away platform sections, along with some inside details. The lower floor features a fireplace, four chairs, and a desk for workers to hand out tickets. The top level features the station master's office, which is accessible via the staircase from the lower level. Here is the complete LDD file. I already have 95% of this model collected IRL, and I just need to order the last 500 parts early next month. Comments, Questions, and Complaints are always welcome! UPDATED 8/23/17: added new pictures and staircase to the model. LDD file also updated!
-
I started designing this station model back in early December of last year, basing it off of set 60050, Train Station from Summer 2014. I got stuck with the set's roof, and put it aside. Then, earlier this week, I got inspiration to remove the roof and start afresh. I eventually removed the big 2 x 12 x 4 windscreens and replace them with two rows of 1 x 2 x 3 windows. I removed the hanging station clock and added the tower, which has unprinted faces in LDD but it should use this print In real llfe: http://alpha.bricklink.com/pages/clone/catalogitem.page?P=3960pb024#T=C&C=11 Anyway, the station has four ticket machines outside, 12 seats on the platform, with eight more seats inside (four of those are for seating in the pizzeria / dining area). Their is even a coffee machine to quench the thirst of the caffeine addicted passengers, station master and / or train crew! The street and track sides both feature eight letters each to name your station. You could even name it Legocity, just like in the original set, or maybe something simple like Bricktown, Duplobay, Ogelvill, or the ever popular name of Galidor. The inside features the dining area for customers of the pizza restaurant, seating for weary travelers and a ticket kiosk for the lone station employee. The station's right and left platform can be extended or removed. Here is the LDD file: http://www.mocpages.com/user_images/80135/1449269932m.lxf Please note: I won't be getting this model as it was originally designed for my brother when I started last year, but now I'm trying to get my dad to get it for his railroad: he wants a station, but the LEGO Shop near us stopped stocking the original 60050 set. This might be the next best thing, and besides, the original set looks too modern for his railroad, plus it doesn't go well with the 9V era stuff anyway...
-
As some of you may know, I changed the black-and-red Texas type steam engine to a more photogenic reddish brown color and added a bigger smoke-box door to the front of the engine. Here is the original version of this engine from a few months back. ...and here is the new version, with a photo taken earlier this month. Their was one problem with this engine though. It had only my 8-studs wide 34-studs long train cars for it to pull. These four (yes, only four) train cars looked really weird next the engine, as the cars were almost as long as the engine (without the tender)! So, I set about redesigning the coaches, which had named the 909 National limited. Here is the results of that rebuilding: This car is the baggage / passenger car, also known as a combine. These two cars are passenger coaches, though I might just make a third one someday. Also, as you may have noticed, the cars are too far apart from each other. This was fixed by moving the wheels back a hole in the train base soon after the photos were taken. The car you see here is just the observation with it's "909" plaque on the rear. Where did get the idea for these tain cars in the first place? They were inspired by a 8 wide Galaxy Express 999 MOC I saw years ago on Brickshelf. (see it here: http://www.brickshel...ry.cgi?f=374748 ) The name of this train was changed to the tune of the Beatles song "One after 909" from the album "Let it Be". Then I tried a bunch of words after that could go with 909, including the following: limited, express, cannonball, flyer, runner, and a bunch of other names and combination of said names I can't recall. Eventually, I ran into National Limited on accident when correcting a typo. I liked the way it sounded, and thus 909 National Limited was born. As a side note, the LDD file for the coaches cannot be given out, for two reasons: 1) MOCpages is having issues with missing pictures, e-mail notifications, and the broken activity bar. MOCpages also happens to be where I upload my LDD files. 2) I made these train spur-of-the-moment, and thus their is no file to give out anyway! I'm quite sure you could figure out how the coaches were made, but if you can't, I will make an LDD file and upload it when MOCpages gets back on the right track. (train pun intended!)
-
I'm still midway through my Santa Fe project, I need to get the files and everything uploaded to Rebrickable. I'm pretty sure I'm done with that, but I'm not sure what else to add to it before I get everything posted. For my new project, I thought I'd tackle the Polar Express! My collection is somewhat lacking in the train department, and given the difficulty of building steam in LDD, I decided I'd try to build the cars first. I had to sacrifice a few details for the sake of functionality, but besides that everything is pretty accurate and well proportioned IMHO. Some of these screenshots are slightly outdated, as I've moved the ladders to the bogies instead of the body, allowing for the couplers to be much closer since. This is the observation ending. This is the most recent screenshot of the car chassises, featuring the updated coupler and ladder positions. All the windows and doors are brick built, using transparent bricks, jumper plates, plates, and bricks. This allowed for the bodies to be much more accurate, with accurate window spacing and sizing. The base is also brick built, not using the standard train plates. One area I've always been self-conscious about is the rounded roofs on observation endings. I always experiment round for hours, playing with different combinations of tiles, curved plates, and cheese wedges. I'm still not 100% satisfied with the shape, but it seems to work for now. This is the interior. One of the biggest things I do when designing cars and locos is use jumper plates to put the seats, to give room for mini figures without using panels for windows and walls. This also allows for a larger corridor for mini figures and details. I tried to replicate the interior from the film, with the sideways facing seats, though there might be a table or two that I'm missing. I'll have to rematch the film for that detail. One of my favorite details is the SNOT for the back window, allowing for the three back windows present in the train car. I think this technique has merit for other prototypes, and you could modify it to make windows of most sizes while staying within the confines of 6 or 7 wide. There's also tiled floors, but you can easily delete the interior details to save cost if you decide to brick link them. If the maersk blue is a problem, it should be relatively easy to change to light blue, dark blue, or grey because it's all common bricks. Close up of the back windows, there's also jumper plates to stick figures in the back of the train. It's a bit short though, you may have to remove legs or only use short figs back there. Close up of the diaphragm. I used jumper plates and more SNOT to get them 3 wide, the correct width, without leaving gaps in the walls. I also added marker lights on the car ends, aside from the observation ending. The regular observation car. The interior of the regular observation car. I had trouble designing the seats, as I couldn't find dark red curved slopes, so I had to use cheese wedges and hinges to make the seats. Unfortunately, this means the seats are about a plate higher than I wanted them to be. If I could get some advice on that, it'd be awesome. My only complaint besides that would be that the observation ending platform is slightly delicate, as the floor and handrail is only held on by the tiles connecting it to the body. Files: polar_express_observation_car.lxf updated_polar_express_passenger_ending.lxf
-
In my fictional universe, the train starts at Chicago (Illinois), with stops at Springfield (Illinois), St. Louis (Missouri), Memphis (Tennessee) before terminating at New Orleans (Louisiana). The 2-6-0 "Mogul" steam engine & it's four car train is painted in dark green, thus giving the train it's name the "Emerald Express". The train consists of 1 baggage / passenger car (also known as a "combine"), two passenger coaches, and one observation car. These train cars were inspired heavily by instructions made by @TJJohn12 for his Retlaw Combine car and passenger coach, as seen here. The model has been remade by me to be four studs shorter, six studs wide (instead of eight), and no longer for use in a Disney theme-park setup, as it instead plies the rails of my 1920's - to 1950's setup. These cars now come with new inter-car connections and inset entryway doors. (plus the rear platform on the observation car) This Mogul type loco was originally made from set 79111, (Constitution Train Chase), with some features of TJJohn12's MOC of the E. P. Ripley locomotive (seen here) from Disneyland and set 10194 (Emerald Night) for good measure. This model has been through many versions since it was first built in 2013, but I think it's as close to perfection as I will get with the chosen brick-based medium. It pulls the Emerald Express of dark green - colored train coaches as seen in the other pictures. The sides of the steam engine's tender features the letters BRS, standing for Brick Railway Systems, which is my fictional railroad company. This combination baggage and passenger car (known as a combine) relies heavily on techniques taken from Retlaw baggage car built by TJJohn12. The two identical day coaches have inset doors I designed myself. The observation car of the Emerald Express. The rear deck isn't the best, but it works using the parts available in dark green... a not too common color in some brick varieties! EDIT 11/5/16: Added newer engine pics and ldd file for engine and tender as (removed) EDIT 12/9/16: Put in pictures of version three of the engine, with the placement of the domes on the boiler revised and the headlight moved to atop the boiler. EDIT 7/23/18: Added revised pictures of the locomotive to the thread, although I have by this point taken a wheel set off the engine to make into a 4-6-2, not a 4-8-2. Alas, I need to take the pictures again, and update the thread. It should only take another year or two... EDIT 6/25/2020: Added newly revised coaches, engine and comments on said models to first post. Real world pics coming soon(ish)! EDIT 7/7/2020: Added new real world pictures of the completely updated four car train. Comments, questions, and complaints are always welcome, so please give feedback!
-
This is my latest project: a 4-6-4 Hudson Dreyfuss inspired stream-liner and it's corresponding train. It was heavily inspired by pictures from Anthony Sava's photo-stream from 2008 and 2007. No instructions were used to build this model. The railway name on the sides of the tender will read Legoredo Northwestern Railroad. The sides of the engine shall have the number 7444 written on it in official printed 1 x 1 tiles. The engine number comes from the screenshot number that was the first WIP shot that I took and coincidentally is near Mr. Sava's 7244 number on his Hudson - type. Here is a link to his model and the only picture I worked from: https://www.flickr.c...s-55973205@N08/ The rear of the engine has a ladder, two hand rails and a red marker light. Here is a close up of the nose of the engine. Fictional engine background: These fifteen 4-6-4 (4 leading, 6 driving, 4 trailing) streamlined steam locomotives were designed for fast passenger work on the Legoredo Northwestern Railroad. The three best riding locomotives of the batch were shrouded in a streamlined, aerodynamic casing, and were assigned to “the Rocket”. This meant they were usually flying along at top speed from New York City to Seattle, with one train going one way and another going the opposite direction. The third engine was held in reserve in case of breakdowns, ready to go at a moments notice. Fictional train background: Here we see the Dreyfuss Hudson pulling a passenger train called "The Rocket", heading from New York City to Seattle via the most northern transcontinental line in the USA. The train is run by the Legoredo Northwestern Railroad and gets it's name from the very fast speed of the train, and for the originator of all modern steam engines, George Stephenson's "Rocket" of 1830. This new train started being run exactly one hundred years after that famous engine began the era of the Iron Horse. The train consists of one baggage car, three passenger coaches, and one observation car. (these coaches are not in the LDD file) NOTES & LDD FILE: Here is the original NYC loco I was inspired by. (picture from Wikipedia) I have found over 500+ parts for this train, so this Art Deco loco and ti's consist will be (hopefully) finished by the end of this year. I also have the LDD file for the engine by itself here ( Hudson locomotive only ) comments, Questions and Complaints are always welcome!
-
This station was inspired way back in 2013 by a long since expired Ideas project (link to my inspiration: https://ideas.lego.com/projects/34642 ), which was doubled in size and now features a double tracked platform + canopy and quad-sided clock tower. NOTE: You may want to cut two base-plates to a 8 x 40 size where the gaps are at the end of the platform. The station proper has removable upper roof and second floor sections. The top floor "floats" on tiles, and is removable to reach the sales counter on the main floor. Also removable is the platform and train canopy, as it is connected to the station via Technic pins. The double track train canopy was inspired by CITY set 60103, Airport Air Show, while the clock faces are supposed to feature this print: http://alpha.brickli...0pb024#T=C&C=11 The street side of the station has space for 8 printed 1 x 1 letters, allowing you to name the station what you want. If i ever did build this, which I probably won't, I would name it Glenncoe, after the location of a 12 inch ride-on real steam railway, The Wabash Frisco and Pacific Rail Road at Glencoe (spelled with only 1 "N") Missouri. (See their pretty cool website here: http://www.wfprr.com/default.htm ) The second floor has the switching control room and station managers office while the lower floor has the ticket desk and inside waiting rooms. By the way: the upper floor floats inside the walls on some tile-topped pillars, and is not connected to the build by studs in any way. NOTE: This train station most likely will never be built by me as I already have 3 stations as of now. But it IS build able in real life, so if anyone of you guys want to take a stab at this station, be my guest and please post the pictures both here and in your own thread. As such, here is the LDD file to the whole model, grouped so you can edit the station as you please: http://www.moc-pages...1463871791m.lxf Once again, questions, comments, and complaints are welcome!
-
Taking a break from my High Speed Train Project, I decided to once again attempt an Amfleet car, easier said than done due to the curved design of the car, I also plan on building a AEM-7 to go with it and upload the locomotive and passenger car to Lego Ideas. The carriage is 8 studs wide, I attempted to make it 6 studs wide since it's going on Lego Ideas, but because of the way the body of the passenger car curves inwards on the bottom (and top), it looked horrible being 6 studs wide. The car contains 22 seats and a bathroom (inspired by the Horizon Express bathroom), opening external doors, I have not built internal doors (yet), the real train has sliding doors, but that is not possible (at least for me, I'm sure someone else could do it) with LEGO, currently the passenger car contains 662 pieces, but that number will be increased when I add opening internal doors. The bogies are able to swivel 360 degrees which will allow them to turn with ease on the tight turns of standard LEGO track. Please also check out Shupp's Amtrak AEM-7 and Amfleet Coach from 2011. Thanks for reading, God Bless Christ be with you all .lxf file: http://www.mediafire...mp15/amtrak.lxf -
Hello and God Bless I have started my first train MOC, in LEGO Digital Designer because I don't have the funds to build real LEGO trains. This is going to be an 8 wide long distance high speed train making use of the large airplane parts from Lego City Sets such as 7893: Passenger Plane, 7894: Airport and 7734: Cargo Plane. I have completed my first car, which is a dining car, this dining car will be attached behind a baggage car which also contains an on-board kitchen. The train contains 6 tables with 2 chairs each (I wish I could it more), opening external and internal doors, at each and of the dining car, there is a soda fountain and a sink as well as a set of drawers. I want to include: Locomotive Baggage car with kitchen Dining car (this car) Lounge car (possibly double decker) Normal sitting car Sleeping car observation car If you want to build in real life, no credit is needed, just have fun. I hope this inspires you, may Christ be with you all. God Bless. diningcar.lxf
-
The look of this train was partially inspired by several 4.5v and 12v-era sets, such 7715 / 7818 for the color scheme and 7740 along with it's supplemental sets 7815 and 7819 for the general look of the coaches. Some parts of this train (the coaches) have already been built from about five years back, while the loco is still a WIP for now. This steam locomotive was slightly inspired by the Rhodesia Railways "15th class" that was used in what is now Zimbabwe. This 4-6-4+4-6-4 Garratt type was 74-units strong and was built by Beyer-Peacock and Company starting in 1940, and after WWII from 1947 to 1952 in seven total batches. You can read more about this specific loco class on Wikipedia. My LEGO MOC version is 'fueled' by oil, whereas the real-world 15th class was coal fired. This is one of the reasons why I said it was "inspired by" and not an exact duplicate of a 15th class. However, the front unit does features a prototypical streamlined casing, and the rear unit partially does too. This LEGO model can take some serious curves (much more than what's shown above!), but that's what you get for building a Garratt: it's one of this type of locomotive's strengths. This picture just shows off the articulation points of my MOC, but technically it could split a switch* and still work just fine with the front engine on one track and rear unit on a second one! *NOTE: Don't try that with a real-world steam loco! The doors on the cab of the loco are supposed to be the 1980's ones with blue print on the lower half. Another missing print is on the oil tank hatches, while number / letter tiles go on the front and rear units. (The front unit gets the numbers, while the rear section gets the letters saying LLR, which stands for LegoLand Railroad.) This baggage / passenger car is called a combine which is short for "combination". All the doors can open on this train, even the sliding ones shown here. The three passenger coaches are identical in every way. The observation car, the rear-most coach on the train, features a platform for sight seeing. The steam loco is still being parted out using pieces from the previous streamlined electric engine and from parts from my collection. Until it's done this is a WIP thread, but suggestions / comments / questions are always welcome no matter the project stage. Drop your thoughts below!
-
29.09.2023 - new locomotives Hello there and thank you for stopping by! Since posting last time i mocced up 3 more locomotives. They have been kept in the same "9V era plus style" i usually build in. The first new addition is a EMD GP "High Nose" Locomotive. It is based loosely on GP7 and GP9 Locomotives and is build in a CN Paint scheme to not look out of place when it runs together with the 10133 BNSF Loco. Speaking of 10133, the lower part and the longer hood-roof is heavily based on this set. EMD GP Highnose CN by Henrik S, auf Flickr EMD GP Highnose CN by Henrik S, auf Flickr EMD GP Highnose CN by Henrik S, auf Flickr EMD GP Highnose CN by Henrik S, auf Flickr Next we have a EMD Switcher Locomotive. Again, it resembles no particular prototype, it is basically an attempt to capture the general vibe of this type of locomotive in a 6 wide format. EMD SW Switcher Locomotive by Henrik S, auf Flickr EMD SW Switcher Locomotive by Henrik S, auf Flickr EMD SW Switcher Locomotive by Henrik S, auf Flickr EMD SW Switcher Locomotive by Henrik S, auf Flickr EMD SW Switcher Locomotive by Henrik S, auf Flickr The 3rd Locomotive is a european one, it is loosely based on the swiss Bernina Crocodile. Most of the parts used to build this locomotive come from set 10277 ( which was killed to create this 6 wide, 9V powered baby crocodile ). Bernina Krokodil (10277 Alternative) by Henrik S, auf Flickr Bernina Krokodil (10277 Alternative) by Henrik S, auf Flickr Bernina Krokodil (10277 Alternative) by Henrik S, auf Flickr Hope you enjoy, comments and constructive criticism are always welcome! _____________________________________________________________________________________________________________________________________________________________________________________________________________________________ It´s been a long time since i last posted in this thread . Some pictures on flickr were lost since then, some mocs got updated, some got dismembered to loot pieces for other projects. So i decided to revive this thread, and to show you some of my Mocs, mods and stuff i´ve been tinkering with since then. The Introduction of the 9V tracks from fxbricks in bigger radiuses triggered me to dust of my beloved 9v sets and to get into the rabbithole of lego trains again. I always had a soft spot for the 9V system, the sound of the metal rails.. It is a fondly remembered part of my childhood, many happy hours were spent playing with it . My models are obviously not exactly to scale. Some are not even prototypical. My goal has been to build something which resembles sets of the 9v era, including the wide range of new parts introduced since then. Another goal is playability. If possible I try to incorporate many play features (minifig seatings, working doors and mechanisms, cockpits and interiors, etc.). Locos: 4551 - crocodile I do not own this set, but i always liked the look of it. My adaptation of the crocodile has been color switched, from the ÖBB red to the german green color sheme. The „beaks“ of the original set were prone to derail. They have been changed to avoid this problem and have been shortened to look more prototypical. Other changes include the addition of 2 windows in the main section and a different roof. Lego 4551 Crocodile - modded by Henrik S, auf Flickr Lego 4551 Crocodile - modded by Henrik S, auf Flickr Lego 4551 Crocodile - modded by Henrik S, auf Flickr 4564 - 3 axle Shunting diesel Almost completly different from the original 4 axled locomotive found in Set 4564, i rebuild this loco to a 3 axle configuration. I always liked small shunting diesels like the german v60 or the vossloh G6, so the design of the superstructure resembles them. Lego 4564 - Modded by Henrik S, auf Flickr Lego 4564 - Modded by Henrik S, auf Flickr Lego 4564 - Modded by Henrik S, auf Flickr MOC – 4 axle modern diesel shunter A 4 axled diesel shunter with guardrails for operating safety. Loosely based on Vossloh and other very rectangular modern designs. Modern Diesel Shunter by Henrik S, auf Flickr Modern Diesel Shunter by Henrik S, auf Flickr Modern Diesel Shunter by Henrik S, auf Flickr Modern Diesel Shunter by Henrik S, auf Flickr DB BR 111 – electric locomotive An electric locomotive for passenger train services, heavily based on the german Baureihe 111. Build in the striking ocean blue – tan color sheme the DB used quite some time ago. BR 111 by Henrik S, auf Flickr BR 111 by Henrik S, auf Flickr BR 111 by Henrik S, auf Flickr Here it is with 4 passenger coaches. BR 111 with Passenger Train by Henrik S, auf Flickr The dining car, with pantograph to power the kitchen. Dining Car by Henrik S, auf Flickr Dining Car by Henrik S, auf Flickr 10183 - Modern electric locomotive This engine is loosely based on modern TRAXX locos. The base for this loco lies in a B Variant of set 10183 – Hobby train. After building the B model i kept tinkering with it, and over time it evolved into something resembling a modern TRAXX Locomotive. I actually have this loco 2-times: One in a red color sheme like DB uses, 10183 - Hobby Train Mod by Henrik S, auf Flickr and one in a black color sheme based on MRCE (leasing service for locomotives in Europe) Lego Hobby Train B Version (V2) by Henrik S, auf Flickr Lego Hobby Train B Version (V2) by Henrik S, auf Flickr Lego Hobby Train B Version (V2) by Henrik S, auf Flickr 7938 - Commuter train A lot has been changed. The middle waggon was removed and the remaining two parts are now connected with a jacobs boogie. The pantographs were removed, as the prototype for my version is powered by diesel. Another noteworthy change is the addition of implied doors. 7938 Mod by Henrik S, auf Flickr 7938 Mod by Henrik S, auf Flickr 7938 Mod - Cockpit by Henrik S, auf Flickr 7938 Mod - interior by Henrik S, auf Flickr Rolling stock: Container car; 2 and 4 axle versions It is build to carry the classic 4 wide containers common in the 9v era. The 4 wide containers look a bit small sizewise, but i like the versatility they offer. They can be transported by the classic 4 wide lego trucks, they can be grabbed by the Container Stacker. So in short, the playability outweighed the scale here. Container Cars by Henrik S, auf Flickr Container Car by Henrik S, auf Flickr Container Car by Henrik S, auf Flickr Container Car by Henrik S, auf Flickr Tank car A 4 axled tank car. The tank can be build in a variety of colors. The solution for the fairly round tank is not by me. I think i have seen the design somewhere here on eurobricks, but i don´t know by whom unfortunatly. So, if you read this and this is your design, please let me know and i will add your name for this technique! The original Design is by Phoxtane, check his tank car here: Tank Cars by Henrik S, auf Flickr Tank Car by Henrik S, auf Flickr 4537 – Twin Tank Car I fondly remember this waggon from my childhood. The original set rocked the classic white-green-red octan colors. On my quest to achieve a round and 6 wide design, this iconic color sheme unfortunatly had to go. Now it is dark bluish gray, which i think is a pretty common color for this type of freight car, so it is okay with me. Twin Tank Car by Henrik S, auf Flickr Twin Tank Car by Henrik S, auf Flickr EAOS - gondola car A car which can be seen countless times here in europe. There is not much to say about this car really, i tried to keep the weight down and the model features working doors. EAOS Gondola car by Henrik S, auf Flickr EAOS Gondola car by Henrik S, auf Flickr Small Box Car A classic of the 9V Waggons, in my oppinion it holds up nicely even today. The only change to it has been the addition of a curved roof, which in my oppinion looks pretty nice. Small Box Cars by Henrik S, auf Flickr Buildings and other stuff: 4554 – Trainstation Another classic 9V set (which i got for christmas in the 90s). I did not change much. Mainly the switch to a tan paint job and the interior of the station are different. The Rest is largely unchanged. 4554 Trainstation by Henrik S, auf Flickr 4554 Trainstation by Henrik S, auf Flickr 4554 Trainstation by Henrik S, auf Flickr 4554 Trainstation by Henrik S, auf Flickr 4554 Trainstation by Henrik S, auf Flickr 4554 Trainstation by Henrik S, auf Flickr 4555 – Cargo station Much like set 4554, not much was changed. I used the modern profile / masonry bricks to get a bit more detail into the building. The interior was tiled and the sparse furnishings were a bit extended. This set is part of the reason why i kept the 4 wide containers. I really like the old grippers in this set, which are also used on the container stacker set. 4555 Cargo Station by Henrik S, auf Flickr 4555 Cargo Station by Henrik S, auf Flickr 4555 Cargo Station by Henrik S, auf Flickr 4555 Cargo Station by Henrik S, auf Flickr Dockside crane Like the old harbour sets of the Lego town days, the base for my dockside is made of the elevated baseplates. The crane works and is able to unload the cargo from boat into freight cars (or into cargo trucks). Dockside Carne by Henrik S, auf Flickr Dockside Carne by Henrik S, auf Flickr So, thats all for now. I plan to update this thread kinda regularly, and to upload more content in the near future. Please let me know your opionions, critics and suggestions. I hope you have fun looking through these pictures!
-
Here in Portugal I've always felt alone when it comes to model trains, I've never had other people who could discuss ideas and improve my constructions, there are people who have tried to make replicas of Portuguese trains, but actually here it's everyone for themselves and I feel I have nothing new to learn with them. I aspire to know more and I've been following the work of Dutch colleagues for a long time, I decided to send a message to a distinguished builder, who has works that I love, @raised I told him I was interested in taking the leap to 8wide and if I could make some constructions inspired by his ideas. The answer was positive, and he present me to another two great builders, Erwin and Nicolas, since then after some study I have done my first 8 wide project, Replica of newly recovered Arco carriages. Biggest challenge was making the sides of the carriage. on the boggies I got some help from Raised. The first pieces are already on their way to make this real. Lego - CP Arco by Sérgio Batista, no Flickr CP 2627 by Nelso Silva, no Flickr
