THIS IS THE TEST SITE OF EUROBRICKS!
Search the Community
Showing results for tags 'real world moc'.
Found 16 results
-
This MOC of author H.G. Wells' time-traveling vehicle from the novel 'The Time Machine' (specifically this MOC is inspired by the excellent 1960 movie version) was designed by user D3ner over on Rebrickable. You can see those free instructions here, though it requires major modifications to be buildable in real life. My brother re-built that MOC digitally in Studio and edited it for me to make it more stable and look better. This model completes my Time Machine collection* and has technically been built since mid-December, but wasn't completed until today when my brother found me an Steampunk Inventor fig from CMF series 27 at Walmart. (Thanks bro!) The Inventor fig fits perfectly with the time machine, and his hat just barely fits over the top of the seat, almost like they were made for each other. *My five time machines include: Bill & Ted's Phonebooth The TARDIS BTTF Time Train BTTF DeLorean H.G. Wells' Time Machine Thoughts? (Also, @Peppermint_M, if you think this belongs somewhere else, feel free to move it where you see fit. I honestly wasn't sure where to put this MOC.) -
(I was torn between Train Tech and Town forums for this thread, so if it needs moving - don't hesitate to move it, mods!) Recently a Flickr user named elijahleestewart commented on one of my riverboat pictures asking about me making a Ninjago ferry from season 4. I said I already had City set 60119 (Ferry) and was not interested in making another. But this conversation got wheels turning, and about two hours later I came up with this vessel you see here, which was made by tearing apart my original Ferry to revise it. The port / left side of the vessel. From here you can see the ladder to access the bridge. The starboard (or right side). The opening gates no longer fold down (as in the original set 60119), but they do split apart to allow train cars to be loaded two at a time. You can load two of the bigger cars (24 or 28 studs long), three 16-long cars, or a single 34 stud long depressed center car on this ferry or you can mix and match. (The last 34 stud long car type is too long to have two of it's kind on there, but it can fit one 34 long and another of anything shorter than that such as a 16, 24 or 28.) The roof section of the bridge is removable to place figures at the controls. Another source of inspiration was the Albatross, a former Vicksburg-area railroad ferry from 1907 that was converted to a St. Louis river cruising ship (one of the largest vessels ever on the river) called the Admiral in the late 1930's which then became a casino and then was sadly scrapped in 2011. You can read about the Admiral here on Wikipedia, and view a picture of the Albatross on Flickr here, courtesy of the Herman T. Pott National Inland Waterways Library. (You can loose a few hours perusing through steamboats on that Flickr page!) ...That's all I got. Thoughts, comments, opinions, and questions welcome!
-
I've had this MOC (originally inspired by the bank from set 79109, Colby City Showdown from the 2013 Lone Ranger theme) made in the real world for about a decade, and I thought it was high time to redo it into a modular style, as it is very close to that scale / size. I added a new neon sign out front that says 'piano bar' to the model, as the old 'saloon' one was removed seven years ago and it didn't look good anyway. You can view the original 2015 neon sign here. The 1890s-style building has two floors, a flat roof, and a removable base for easy conversion from modular to non-modular. The rear of the building really hasn't got any details. On this level are the bar where drinks are served, a few tables, and the stairs to the second floor. Of course, with this build being set in the 1920s, all the drinks are non-alcoholic. (...or at least they're supposed to be!) On the second floor is the piano and more tables. I can just about hear the piano player now... Thoughts, comments, questions and so on are welcome!
-
This modular building-style corner LEGO store was heavily inspired by set 31105 (Townhouse Toy Store from Creator) while the LEGO delivery truck is modified version of the postal vehicle from set 10222 (Winter Village Post Office) whereas the sidewalk burger stand is directly taken from 60404. (City Burger Truck) The building also draws from some free Rebrickable instructions you can see here. The building is a bit short in the height department compared to official modulars, but when next to my custom buildings it fits right in! On this side we see the second-floor patio. The lower floor is the shop's sales floor, and also has a enclosed delivery area off to the side. The shop sells all manner of Lego sets and pre-built models for sale. The burger stand's roof also is removable. The second floor is a apartment, and features a bare minimum of features to sustain life, but it does have a gigantic Lego train layout in the corner. (somebody has their priorities in order!) This truck is heavily inspired by the 1920s truck from the first Winter Village post office. The doors on both sections open, and the truck seats one figure at the wheel. (Oh how I wish those rear doors came in yellow!) EDIT 11/16/24: Models finished in real life - pictures added, and text updated in the first post! Thoughts?
-
This is a mashup MOD of sets 70420 - Graveyard Mystery, 76428 - Hagrid's Hut An Unexpected Visit, and 75965 - The Rise of Voldemort. This mashup has been combined into one cohesive cemetery with accompanying groundskeepers hut. The hut is only connected to the graveyard by four studs, and as such is removable from the rest of the MOC for transport. The resulting two sections are solid enough to be be carried in one hand each... though not for long distances! (I'm not brave enough for that!) The back of the model. The statue holding the scythe was taken from 79104 - Dol Guldur Battle - to replace the unprinted one from the Voldemort set. The other statue is a Weeping Angel from set 21304 - Doctor Who. (Don't blink!) I wonder what this key opens? and why was this poor soul buried with it? I... wait a second. Did that statue MOVE? Inside the hut I added an old TV inspired by the one from 43217 - UP house and removed Hagrid's huge chair. I also modified the roof connection points by removing the studded 1x3 jumpers, as this allows the hut roof to just sit up top unconnected and be more easily detachable. Update 10/12/24: This hearse is styled after the 1920s-vintage truck in set 10222 - Winter Village Post Office. I recolored it, extended the bed, and added opening doors to the rear. The model seats a driver in the front, and a coffin can be placed in the back. The hearse should be built in real bricks by the end of the month. ....and that's all I got. Comments, suggestions, and questions welcome!
-
This double track train trestle is finally finished! The bridge uses four girder parts from City set 7900 from 2006 that I've had laying around for 18 years without much luck at making a bridge (despite several attempts) - until now! The bridge is ~30 inches long, and is designed to hang between two tables with the parts under track off the end of the bridge proper serving as feet, holding the bridge level and on the table top. Looking up track through the centerline of the bridge. There are 16 bricks of space from top of the rail to the roof girders, which means it can take double-stack Maersk container cars with a plate to spare. To pick the bridge up, you can grab anywhere but the roof lattice - those plates aren't reinforced enough to take the weight. The underside has been reinforced since the initial design stage... It's a lot stronger now, and *should* be able to hang between two tables without breaking while trains run over it. (I've not been able to test this with motorized trains as I don't own any.) Thoughts, comments, questions? Feedback is appreciated! EDIT 7/6/24: Please pardon my messy layout! I've really got nowhere to go with most of this stuff, but nevertheless I just managed to rearrange it around, moving tables and adding my bridge to the mix. The bridge works beautifully and hasn't collapsed yet which I consider a major win for my design skills! A digital look at what the layout looks like without the stuff in the way.
-
This is the fifth version of my modification of set 7997 (Train Station). Here are my notes to recap my progress from stock set to version five: I got the original set 7997 (shown above) in 2007, along with a double rail crossover for my Birthday. I wanted to make it a full building but didn't have the parts. By 2008, I had discovered Bricklink, but the station was in pieces by then and was not re-created until early 2012. The station was a stock set, while I searched for ideas. Eventually, I came across a build by a fellow Eurobricks user named Lazarus that incorporated a modular basis, a full building (street & track-sides) & a appealing design. I saved a picture of it and made my own design based on his. I included really neat features, (such as the arched lattice windows made with a fence) but I went too far and made it impossible to transport to train shows and LUG meetings. The platforms were very flimsy, and during the move to a new house in 2013, it shattered into small chunks. So, I went back to the drawing board, scrapping everything but the building itself. The 2015 version of the model was eventually scrapped in 2020 after it was accidentally dropped and destroyed. However, now in 2024 I made a red version of that model, with a few new parts added on. It has one platform, plentiful outside seating and a removable roof with second floor office. There are many other changes from the set, but the heart and soul of that 2007 set is still there. The name of the station is Edgewood, and it is staffed by the two figures standing on the platform. Here is the street side of the station, with the brick-built LEGO railway logo plainly visible. I decided on the swapped color scheme because of the similar yellow-to-red color swap sets 4554 - Mero Station / 2150 - Train station from 1991 / 1996 respectively. Upstairs is the station master's office. (Don't ask me how he gets up here - I don't know!) Here we can see the interior of the station's main floor, with ticket machines and refreshment stand. Here you can see the modular breakdown of the model, which includes the following: -Station building (lower floor) -Station roof and Tower control room (upper floor) -Tower roof -left platform section -right platform section ...Thoughts?
-
So after looking at my 2-6-2 steam loco a bit harder late last month, I decided the tender for that loco was too small by two studs length-wise. Thus, in order to make it more proportionate in relation between engine and tender, I made a longer tender for that loco (which is already uploaded to EB in it's final form in this thread) and added the old tender to this brand-new 0-4-0 yard goat. This oil-fired switcher shares a piston design with my MOC of Lady from Thomas and the Magic Railroad. The rear of the loco. Credit where it's due, the cab design and some of the tender were inspired by @SavaTheAggie's 2-6-2 design from over a decade ago. Inside the 7 wide cab. This tiny loco might also be my last Brick Railway Systems engine as the letters / numbers on my engines are getting WAY too expensive, and my stash of them is practically empty. I'll still build other stuff, (probably freight cars, which I don't have a lot of) but I have too many locos as it is, so this might be the end of that. It's kinda funny though, as my locomotive collection started with a 0-4-0 twenty years ago, and it just might end with this same wheel arrangement! Thoughts?
-
NOTE: The steam loco itself began life as a 2-8-4 Berkshire type built by @Plastic_Goth and the instructions were purchased from Rebrickable as seen here. To make this steamer my own, I upped the wheel count of the original locomotive by another leading axle, making it into a 4-8-4 Northern-type from the original 2-8-4 Berkshire as built in the instructions. The piston / wheel assembly is entirely my own work, as is the completely new 7-wide tender and the train the loco pulls. The whole train, with the steam loco and five cars - a baggage car, three coaches, and a observation lounge. This engine originally pulled my MOW (Maintenance Of Way) train when it was built three years ago. Now, it's been upgraded to passenger train service. I also updated the front of this 4-8-4 steam loco model to have a smaller cowcatcher, as opposed to the original one-piece cowcatcher I originally had installed. The rear of the loco, which is lettered for my railroad, Brick Railway Systems. Inside the cab of the engine. The baggage car. All five cars use roller-skates for door handles. These three identical passenger cars are also in the train. The observation car on the tail end of the train uses four of the new 3x3 macaroni brick parts in trans-clear for the back window. These parts are actually the reason I didn't upload this a month or so ago when the rest of the train was finished - I had to wait for them to arrive from Pick-A-Brick. Thoughts? Comments are always welcome!
-
Recently I reverse engineered what I could of the 1950's-styled 'lead sled' in upcoming summer 2024 set 60408 - Car Transporter. I didn't have pictures of the rear (and obviously instructions were also a no-go at this time), so improvised as best I could using what I thought looked reasonable for a fifties car. I managed to get 99% of the car built from one picture. The front of the car with the vehicle's owner. I can build the car in other colors, (yellow and red are among the possibilities currently) but I'm keeping my lips sealed on what the future holds... The rear of the car. Admittedly, I stole the taillights design from this old @hachiroku MOC. The inside seats one figure at the wheel. Here is the original car from set 60408, which releases this August in the USA. This is the one picture I used to build the car MOC, which was cut from a much larger picture and greatly expanded in size. ...That's all I got. Thoughts, comments, questions, suggestions, and complaints welcome!
-
I originally built this 103-stud long 1920's Adventurers tramp steam ship from two Adventurers sets: I enlarged the ship from set 5975 - T-Rex Transport and modified it to resemble the vessel from set 5976 - River Expedition. The resulting ship (which is named the Eastern Star) features a lifeboat, steering wheel, and a smokestack plus I have the bridge with removable roof for the top deck of the ship, and captain's quarters for the lower floor. Currently, an ornithopter (inspired by set 70913 - Scarecrow Fearful Face-off) is being transported, as well as a live T-Rex in a cage. The ladders hanging on the side of the lower deck lead the way to the ship's bridge on the upper level. The life boat is also located back here. This T-Rex (from set 6720 - Tyrannosaurus Rex) looks none to happy about being caged! The bridge features a nautical telegraph / engine controls and the wheel. The lower level features the captain's quarters, with a table full of priceless relics and ancient maps... plus a dynamite plunger. NOTES: I built this ship in 2018, added the dinosaur and cage in 2022, and finally got around to taking photos in 2024... sorry for the 6-year long wait! Thoughts?
-
This 7-stud wide diesel is modeled after the General Electric (GE) 44 ton switcher locomotive made between 1940 and 1956. The little diesel is bi-directional, and doesn't have much to differentiate between the "front" or "rear" expect for the air horn on one end in real life. My LEGO model lacks these, so it is totally symmetrical. You may be asking yourself: 'Why 44 tons, what's so special about that number?' I give you the answer from the Wikipedia article on this loco type: "This locomotive's specific 44-short ton weight was directly related to one of the efficiencies the new diesel locomotives offered compared to their steam counterparts: reduced labor intensity. In the late 1930s, the steam to diesel transition was in its infancy in North America, and railroad unions were trying to protect the locomotive fireman jobs that were redundant with diesel units. One measure taken to this end was the 1937 so-called '90,000 Pound Rule' : a stipulation that locomotives weighing 90,000 pounds (41,000 kg) – 45 short tons – or more required a fireman in addition to an engineer on common carrier railroads. (Industrial and military railroads had no such stipulation.) The 44-ton locomotive was born to skirt this requirement. The 45-ton rule was eventually repealed in 1963." Side view of the loco showcasing the symmetry of the model. In-universe, This diesel is painted as Brick Railway Systems loco 97 in a throwback black / red paint scheme to celebrate the railroad's 130th anniversary in 2024. (In reality, it's my fictional railroad I made up when I was a fourth grader, which is having it's 20th anniversary this year, so I've been feeling a bit nostalgic recently.) Thoughts?
-
Notes: For the sternwheeler, I saw a similar steamboat on LEGO Ideas a number of years ago and in 2019 I finally got around to recreating it from the pictures provided. (the project sadly never made it past several hundred votes, it my memory is correct.) I modified it heavily into the version you see far below with my own tweaks and twists in the design installed, such as I added a second funnel, revised the placement of said funnels to the front of the ship, and removed the roof off most of the second deck. Oh, and I added three whistles to the top of the pilot's cab like those in set 21317. (Steamboat Willie). The sidewheeler model (seen directly below) was created in 2024 out of my desire to have two very different styles of steamboats in my collection, with this one being a sidewheeler, and the other a sternwheeler. (I also have a 1930s towboat and a few tows to complete the scene, but those are too modern for this thread.) The sidewheeler has no interior, just like the sternwheeler, and was also inspired by set 21317. I named this later vessel Lodi and the first one Proud Mary - both of which are Creedence Clearwater Revival rock-n-roll songs from over 50 years ago. Lodi (sidewheeler, built 1869) "...Just about a year ago I set out on the road Seekin' my fame and fortune Lookin' for a pot of gold Thing got bad things got worse I guess you will know the tune Oh! lord stuck in Lodi again..." This notorious side-wheel steamboat, named Lodi, was named after the city of it's construction in 1869. But unlike the strict city of Lodi, with it's anti-gambling stance, Sunday no-business laws and abstinence from alcohol attitude, this boat thumbs it's nose at those rules, resembling the city in name only. It's a haven for card-sharks, shady ladies, pick pockets, and con men selling 'medicinal' snake oil cure-alls. Why would anyone take a ride on the Lodi, you ask? Well, the only other steamboat plying Rapid River is the slightly older Proud Mary stern-wheeler, which takes about a two weeks to get from one end of the river to the other. (not including stop times at towns and villages) The Lodi then has a sweet spot when the competition is out of the way: it's the only other steam boat in town, making it very easy to attract potential customers. The ship is captained by a man by the name of James Dagny, who is known for taking serious risks without a second thought to safety of his ship, passengers, or crew. This has earned him the nickname of Jim Danger, but don't call him that to his face if you value your life! (You can see him above standing by the second deck's railing towards the stern of the ship) The rear of the sidewheeler. Proud Mary (sternwheeler, built 1867) ...Left a good job in the city Workin' for the man ev'ry night and day And I never lost one minute of sleepin' Worryin' 'bout the way things might have been Big wheel keep on turnin' Proud Mary keep on burnin' Rollin', rollin', rollin' on the river... The captain of the Proud Mary is Thaddeus Sweeney, better known as "Old Man Sweet-tooth", for his habit of chewing saltwater taffy when the going gets tough and and giving candy out to the little children whenever he lands at small towns and native american villages such as Lone Tree, Nebraska, or Fort Legoredo, Colorado. He usually plies his stern-wheel steamboat up and down the Rapid River, with the Missouri River landing at Kansas City at one end, and the the mighty cliff face of Showdown Canyon Springs at the other end in the middle of Colorado. Thaddeus is the only one he trusts to handle his ship, as he says the Rapid River is too treacherous for many newer pilots, as the wrecks that litter the shoreline prove. However, even Captain Sweeney admits from time to time that age is catching up to him, and he has been looking for a suitable first mate for the Proud Mary for some time. The rear of the sternwheeler. Captain Thaddeus Sweeney, also known as Old Man Sweet-Tooth. Thoughts?
-
This late-1930's American-styled coupe car model is heavily modified and recolored from these free police car instructions as seen at this Rebrickable MOC by user Leewan. I remade it into both yellow (not shown) and blue varieties from the original black-and-white, removed the doors, and revised some other stuff "under the hood". Also, the model bears a resemblance to the titular car from the 1952 Disney short film 'Susie the little blue coupe'. The front of the car. The rear of the car. The inside can seat two figures and the roof is removable. (Picture from Wikipedia - the short's music is still under copyright, but the pictures are not, strangely!) I couldn't do the radio antenna on my MOC, as it changes sides on the car from scene to scene. Also, I couldn't get the eyes on the windscreen. Fun facts: - The design of the Disney / Pixar 'Cars universe' characters was inspired by Susie. - Bill Peet wrote the story treatment for Susie the little blue coupe. (he was quite prolific as a writer and animator for Disney, see his wiki page) Later, he also write the book 'The Caboose Who got Loose', another one of my favorite books - and MOC's! ...and that's all I got. Thoughts, comments, suggestions and questions are appreciated!
-
My LEGO model of Sabine River and Northern 408 is below the short handrail, just behind the access ladder. This MOC is based on a real loco, one of five NC class switchers built by Electro-Motive Corporation. (which later became EMD when it was bought by General Motors) Some of these five locomotives had General Electric electrical equipment, while others had Westinghouse, since EMC's own designs were not yet ready. Wikipedia doesn't have a lot to say on the NC class (it doesn't even have it own page!), but it does give us the history of this specific loco which is the last of it's class (as far as I know): 'EMC S/N 651 (built May 1937): Youngstown and Northern Railroad 202, to Elgin, Joliet and Eastern Railroad 408 in April 1946, to Marinette, Tomahawk & Western Railroad 408, then finally to the Sabine River and Northern Railroad as 408 before being preserved in the National Museum of Transportation in St. Louis, Missouri.' In addition, the engine's plaque at the museum says it cost $91,500 when new, and arrived at the museum in 1974. During the summer months, you can climb into the cab... although it is a very steep climb. The Lego model was heavily inspired by a SW1500 (which is a later cousin to the NC type) model I saw here. You can also read more about the Sabine River and Northern here on Wikipedia. I couldn't possibly get Sabine River and Northern to fit on the long hood, so just initials were placed instead. I also used a new printed 1x6 tile from set 60401 (Construction Steamroller) near the cab door. Thoughts?
-
This railway engine shed was mostly inspired by user @lightningtiger, who designed the basic Technic frame on his own smaller shed for his town in 2018, and I ran with the technique to create this wooden western-style steam locomotive shed in June 2022. It is also slightly inspired by by the shed used to store the replica Union Pacific "119" and Central Pacific "Jupiter" 4-4-0 steam locomotive's over at the Golden Spike National Historic Park. (link is to Wikipedia article on the site) located at Promontory Summit, Utah. The shed is 3 1/2 tracks long with a total of 56 studs from back wall to the leading edge of the baseplate, with injection molded 1/2 track pieces from Bricktracks used in the MOC. The building also features a cow skull on the front between the locomotive stalls, just to give it that Wild West flair. The model quite neatly fits both 4-4-0's I made that were inspired by set 7597. You can see the real world photos of the engines and more in this thread here. (sorry for the digital-only picture like this, but I can't get the roof off to take it in real life!) The rear of the shed features a personnel door for workers. The roof of the shed is not removable, but it can fold open a very small amount bit on clips on either side. (maybe a quarter of an inch at most?) I took the wood hutch from set 76428 (Hagrid's Hut - An Unexpected Visit) with the water tower design my dad made in he 1990's and a generic coal bin to make this refueling depot for my wild west steam locos. I also added a bathing mini-figure to the top of the tower (Petticoat Junction-style) and removed the sand green from the wood hutch roof. Another view from the opposite angle. ....And that's all I have! As usual, comments, complaints, and suggestions on this model welcome! EDIT: Main post updated with real world pictures of refueling depot as of 5/8/24!
