THIS IS THE TEST SITE OF EUROBRICKS!
Search the Community
Showing results for tags 'render'.
-
FebRovery is on again! Now I came up with a Tanker Rover. FebRovery Tanker - Front by Kamal Muftie Yafi, on Flickr FebRovery Tanker - Rear by Kamal Muftie Yafi, on Flickr More information in my blog!
-
Yes, 2018 is just in front of us! That's how I create this creation, the opened door represent we’re going to 2018 and the bright light in front of it means a bright future which I hope we all have it! Getting Ready for 2018! ? by Kamal Muftie Yafi, on Flickr Happy New Year all!
-
Not a real movie spoiler, just a meme! Spoiler alert! ⚠ by Kamal Muftie Yafi, on Flickr
-
There’s another celebration again! Today is Eid al-Adha (Feast of the Sacrifice). It is the second of two Muslim holidays celebrated worldwide each year. It honors the willingness of Ibrahim to sacrifice his son Ishmael, as an act of obedience to Allah’s (God’s) command. Before he sacrificed his son, God intervened by sending his angel Jibrīl who then put a ram in his son’s place. In commemoration of this, an animal is sacrificed (know more in Wikipedia). As a Muslim, I celebrate it too in real life and in LEGO. The model I’m gonna show to celebrate this occasion is a Minecraft scene with a pen, some animals, a house, and completed with Minecraft style background. Happy Eid al-Adha 2017! by Kamal Muftie Yafi, on Flickr I’m not a Minecraft gamer. The model is done by searching for a reference on the internet, so I’m sorry if I made some inaccuracies in the render. Anyway, it always fun to create a model in a selected theme that you haven’t make or know about it.
-
I'm back again with new MOC! This is a "Military Half-Track Truck". The model is about 20-studs long, about 18-bricks tall, and 8-studs wide (about 10-studs with tires and tracks). The model also features, articulated steering and suspension, front pendular suspension, rear track suspension, openable bed, and interior. Though it has an interior, but it can't fit any minifig. Half-Track Truck - Front by Kamal Muftie Yafi, on Flickr Anyway, this model was originally built for Dgustafsson13's 10K Building Competition. And you can read some more information and renders in my Blog!
-
Marking 72 years of being an independent nation, this August 17th is a day that will be celebrated by Indonesian people, and so I am. I tried to replicate the Jayawijaya mountain and put a small Indonesian flag in the top of it. So here it is. I think I've done a great job on creating this. Glorious Indonesia! (Indonesia Jaya!) by Kamal Muftie Yafi, on Flickr See a blog post on DigiBrickz.com!
-
I'm in the middle of learning Blender, but I stumbled upon Poliigon and was blown away. I'd really like something to aspire to once I've got a grasp on the basics, so has anyone tried applying a Poliigon texture to a Lego render of any sort?
-
It wasn't until I went to university and only came home in the weekends, I realized how much I love the sight of my hometown of Temse in Belgium. I always try to have a seat to the left of the train, near a big window, especially near sunset. Because when my train crosses the Temse Bridge over the Schelde river, the view is just magnificent and then I know I'm home. [MOC] Temse Skyline by Bert Van Raemdonck, on Flickr You can imagine that on reading the assignment of Rebrick's "Dream Skylines" competition, "Build a Skyline of somewhere close to your heart", I didn't hesitate for a moment on what to build. But I think that choice might have been the only easy part about this contest! Since the creation has to be in the style of the existing LEGO Architecture skylines, I had to come up with several ways to add enough detail and texture at the small scale, and at the same time had to adhere to the maximum size requirements that didn't allow for any overhang. Personally, I also wanted to create something that's completely buildable in real life with solid connections and only existing part/color combinations - because who knows, maybe one day my town will be interested to have one of these for real? - which caused me a lot of headaches. All of that made for a build time of nearly a month for this seemingly small creation (that still contains close to 800 bricks). After all that building, I managed to cram in most (though not everything) of what I wanted to represent. From left to right, you have the Boelwerf Crane, the Onze Lieve Vrouwe Church, the Old Town Hall and the Temse Bridge. If you're interested in more information about those individual buildings, just keep reading! [MOC] Temse Skyline - Onze Lieve Vrouwe Church by Bert Van Raemdonck, on Flickr The Onze Lieve Vrouwe Church is the defining building of the Temse skyline, and rightfully so. The original dates back to the 770's, erected by the holy Amelberga, the patron saint of the parish. It is believed that she fled her suitor, a powerful man, because she wanted to dedicate her life to God. And when she was cut of by the Schelde river, a giant sturgeon appeared from the water to lead her safely to the other side, where she erected the church out of gratitude. To this day, we have a yearly procession to celebrate her. Of course the church was rebuilt several times, and I depicted it as it appears today,the way I know her inside and out because this is the building where I go to mass and have gotten to know a lot of wonderful people. I love this building so much that I actually tried to build it several times before this contest. However, i always got stuck on the iconic but hard to capture shape of the clocktower. However, having to work at this small scale forced a certain size of the tower on me, which enabled me to have a more focused problem. When eventually I found out that the classic medieval helmet worked perfectly to capture the bell shape of the bottom part of the roof, and that's what really kicked of this entire creation. Since I couldn't connect anything to the helmet, I had to work with an external support, but luckily it doesn't get in the way of appreciating the creation too much. I also had a lot of variations for the rest of the tower, but in the end this version with the notches nicely corresponding to features on the actual building made it, also thanks to the input of my family on this issue! From there on, it was mostly a lot of complicated SNOT work to let the windows and the buttresses work, but it gave a nicely textured result. To top it all of, I included the statue of the Blessed Priest Poppe, who is also a central figure in our community. [MOC] Temse Skyline - Old Town Hall by Bert Van Raemdonck, on Flickr Up until a couple of years ago, this was the administrative heart of Temse, but now everything apart from some ceremonies has moved to the new administrative center in a modern building for which I didn't have enough space to include... Still, it's a beautiful building from the beginning of the twentieth century that actually stands on the place where once the home of my ancestors stood. One of the ceremonies being held here, is the memorial of two of my ancestors, who became famous after allegedly dying in each other's arms during the first World War, becoming a symbol for love between brothers. This year, it was exactly 100 years ago that happened, so there was a ceremony on this very fitting location, where my sister and I also read some poems one of the two brothers wrote. Truly a special experience! Building this also was a special experience if you can call it like that, because of all of the tricky SNOT fitted into a really tiny package. I'm really happy with how the roof turned out. And while it's a pity that the spires of the main tower have to be held in place by a rubber band, at least the official LEGO rubber band with the right size had the right color as well. [MOC] Temse Skyline - Boelwerf Crane by Bert Van Raemdonck, on Flickr I was born just half a year too late... If I would have been born sooner, I would have seen the Boelwerf working with my own eyes. It was a big shipyard along the Schelde river just outside of the town which was the economic heart of Temse for quite some time, with the biggest ship of the world at that time being build there. My grandfather was one of the employees there working among the docks, the cranes, the machine shops... Whenever I see pictures of those periods, I begin drooling and dreaming about that time that I sadly never knew. Because right now, where once the Boelwerf was, now a lot of new apartment buildings, houses, shops like my hairdresser and the new administrative building stand. The only thing that remembers the glory days is a beautiful and huge crane that never actually belonged to the Boelwerf but became an essential part of our skyline, and a couple of poles in the water and a hidden dry dock. Building this one actually went surprisingly easy when compared to the previous two buildings, and I'm pretty satisfied with how I managed to maintain the spindly look of the construction and the realistic angles of the supports, realized by putting technic pints over minifig antennas. The difficult part about this build actually was keeping it within the prescribed size limits of the build without overhang. That's why I had to sacrifice one of the three wrenches in the back, but luckily it isn't as noticeable. And nice to know: the crane can actually swivel around! [MOC] Temse Skyline - Back of the Box by Bert Van Raemdonck, on Flickr I really had a lot of fun making the renders for this creation, trying to match the box art from the official skyline sets as well as possible, and I'm very happy with the results that accomplish my goal. Just ask if you want to know more about the rendering process. This is also a place to discuss the final building: the Temse Bridge on the far right. Although it doesn't look like it from the build, this was with its 365 meter for a long time the longest bridge over water in Belgium, and also one of the prettiest, in my opinion! The original actually was designed by Gustave Eiffel (yes, thát Eiffel!), but that one was deliberately blown up during the second World War. In 2009, a second bridge next to it opened to allow for more traffic to pass because it was getting a bit problematic. That bridge is actually nine meters longer than the original one, so in Temse we have just one, but the two longest bridges over water in Belgium! Giving the bridge the skeletal look was impossible to do on this scale, but the bottom of the plates actually still gives a nice texture to it. I couldn't make it as long as I wanted, and I had to place it at an angle, just to stay within the size requirements, so in reality it is of course way longer. Also, the 2009 bridge didn't fit on even though I created a model for it. But then again, that bridge pales in comparison to the older one. In the end, I'm very pleased with the result, so it was worth all of the work. It gives me the same feeling as when I see the real skyline from the train on a Friday evening, the feeling of coming home. Which is really nice that I'm on a two month internship in South-Korea! Thanks for looking, and I hope you enjoy your home as much as I do! _________________ The digital file (LDD)
-
After finishing it and creating minifigures I uploaded it to LEGO Ideas which you can find here: Four-Towered Castle It contains some extra information such as piece counts. Feel free to leave a support on the LEGO Ideas site if you like it. 3D Model view here on Sketchfab: Four-Towered Castle The Full Inside view. Note that the castle is made in a "L" shaped layout. The left/West Entrance. Notice the flaps that would allow archers/crossbowmen to fire through and take cover. The inside side of the West entrance. Entrance to the hall from the courtyard/bailey. The alchemy room. With a green substance in a flask and a chandelier below the tall ceiling. The certainly need a ladder here. A tower with a wooden hoarding around it. Crossbows are stored here. The armoury. Along with the stacked sword it has a bed for a soldier here as well. View above the towers. Better view of the catapult and the winch for raising the portcullis. Inside the shack extension. The Great Hall. Turnable fire in the great hall's fireplace. Winch which you can rotate the fire and exterior of the hall. Drawbridge Outside. Gate Inside. Chest room. Stone Sigil. Walkway. Romans with a catapult & Celtic Warriors. Upper view.
-
Hello everyone, this is my second post here about a model that I am very proud of that I designed a while back. I present to you, Han Solo's DL-44 blaster replicated in 1:1 scale using Lego bricks. The model was blogged about on Bricknerd. Link for anyone interested is below: Link More Photos More Photos More Photos More Photos Comments and constructive criticism are appreciated as always.
-
Today, or maybe yesterday was July 17, and that is the date for World Emoji Day. So I'm gonna celebrate it on my own style, by using LEGO! Celebrating #WorldEmojiDay with LEGO by Kamal Muftie Yafi, on Flickr This emoji artwork is rendered using Blender freestyle and I used an orthographic camera to get the best perspective of it. The emojis are just randomly putted, but I focused for the happy emoji to be in the middle of all the Emojis, you want to always be happy right?
-
A render of a small vignette that'll be used to display some custom figs. 577 pieces in a 22x22 area, and about 6 hours design time.
-
Presenting another of my Danish State Railways’ (DSB) trains redesigned to 8-wide and digitally rendered (with a bonus livery)... DSB IC3 The Danish State Railways’ (DSB) highly successful and innovative InterCity 3 aka IC3 passenger train was co-developed by Siemens -Duewag in Germany and ABB Scandia in Denmark. The train is operated by DSB in Denmark and Sweden, by Renfe Operadora in Spain and by Israel Railways in Israel. Amtrak in the USA and Via Rail in Canada have tested the train in the past. A trainset consists of three units; two diesel motor units (Litra MFA and Litra MFB) and one intermediary unit (Litra FF). Up to five trainsets can be coupled together. 96 trainset were built for DSB from 1989 to 1991. All are still in service today. My model: Original white and red livery used from 1989 to 2002. Fictionally named “Jørgen Vig” with the crest of Billund added. Scale: 1:48 Length: 157 studs (MFA: 55 – FF: 47 – MFB 55) or approx. 122 cm Width: 8 studs Bricks: 2.948 (MFA: 1.040 – FF: 861 – MFB 1.047) Locomotion: 2 x 9v or 2 x PF/PUP train motors Power: 9v, 2 x LEGO AAA battery boxes or 2 x BuWizz battery boxes Control: 9v, PUP, SBrick, PFx Brick or BuWizz Designed: 2022 Conversion of my 7-wide model from 2017 to 8-wide with more accurate dimensions. Very high setting render from Stud.io with custom decals added in the PartDesigner tool. Its able to navigate R40 but looks rather silly doing so: Interior with seats for 83 minifigs: Decorative side design for the bogies - a combination of parts and the molded decorative side for train motors: The coupling part can be change to a Liftarm Thin 1x7 (BL#32065) when combining several trainsets. Technique used for the sliding doors: Removing the 1 x 4 Tile as shown enables the door to slide open as a play feature. The fixed outer doors are a necessary part of the construction otherwise the very long body breaks too easily due to the roof being removable. However, they are designed to be rebuilt open when needed and the trainset stationary on display: The trainset is (fictionally) named Jørgen Vig with the crest of Billund added: Free building instructions: Option 1: https://open-l-gauge.eu/dsb-ic3/ Option 2: https://snakebyte.dk/lego/instructions/trains/diesel_engines/dsb_ic3_(8_wide)/index.php Bonus livery: Livery when Amtrak tested the IC3 Flexliner DMU (Diesel Multiple Unit ) in 1997:
-
Built and rendered in Stud.io. 5 trees. 2 soldiers and a few guns against a Russian T - 90 tank. I took a few creative liberties (i.e. the blue and yellow shoulder pad, the flag on the tank) but tried to stay true to life a good bit. This includes the infamous 'Z' on the port side of the tank. Слава Україні! Peter
-
Hi all, during a pleasant discussion in this thread... ...a very interesting question was raised by @SDLgo9 member: The 7777 idea book pages mentioned here are those three pages showing the blue matter (!) unloading station and the famous auto-unloading wagons. These wagons are pulled by an obscure locomotive, which is never fully depicted. In fact - the front view is missing, and there's no clear view of the boiler. I've NEVER taken care of it, nor analyzed it too much. It really seems a 7730-based locomotive, but simplified in some details. There's a strange combination of "simple look" and now overpriced rare parts. So maybe it's simple - but it is a wanted effect? Analyzing the whole scenery depicted in the book - it's not a place for a fancy locomotive. There's work to do - wagons are fully loaded and heavy, so that unloading station surely needs a workhorse. And these workhorse is powerful, maybe not so good looking, but simple and solid, ready for its everyday duty. Here's a rear view, similar to the one in the Idea Book: It's a long locomotive and it's not using the classic train base (like 7810). It's pretty boxy and looks heavy. I had to take the scans from Brickfactory and to modify the photos to see a bit better. But which parts were used of the body is pretty unknown to me. So, we have the 2x2x1 black windows on the rear part - being a 7730 derivate - there are also doors, and at this point, the 1x2x1 small black windows. But it seems (to me) that these are not facing towards the front, and instead are used as small side windows. Side reservoirs are big, so fitting the two weight bricks was not a problem. The smoke stack is visible and there's not so much to say - but the boiler...is not completely visible. I added a square steam dome just for completeness. There's an headlight on top of boiler, and it seems there are also two headlights on the "nose". They are not fully visible, for this reason I think these are not placed on the corners of the chassis. Let's try: Simple and straight - the boiler is not round, but goes down to the chassis, same "steering wheel" as in the 7730. Headlights are a bit more inwards. All in all it's a simplified 7730 nose. Then, a more "Narrow Gauge" look - always with 7730 parts: There could be more styles, just removing the front steering wheel part and playing with slope parts. Suggestions are welcome!!! Davide -
Hi all, Now that Studio’s Eyesight has been open sourced, I managed to build and run it natively on Linux 🥳 and to make Studio use it seamlessly 🥳🥳 and with the GPU too 🥳🥳🥳🥳 If someone wants to give it a try, I wrote a howto.
-
Okay, I know this has been brought up before, but I've tried LDraw, Bluerender, Pov-Ray, Blender, and none of them work on my mac. Any advice?
-
Hovertank L-11 by Sunder_59, on Flickr 3D view on Mecabricks
-
Got inspired by Miracle of Sound's song "Man and Machine". * * * Now folks remember, if you like what I do and you want to see me create your OC, a favorite Bionicle Character, or something else, feel free to look up my Commission Info! I also now have a Patreon page, so please consider supporting!
-
(The image is clickable) So basically, this MOC is inspired by Nintendo 64 racing game Extreme-G where player races against the AI or other players on desolate expanses of the old Earth using remotely controlled super-speed motorbikes. Also have a low-res rotation GIF:
-
Can you call this LEGO?
Ulrik Hansen posted a topic in Digital LEGO: Tools, Techniques, and Projects
I could not find a discussion on this already so here goes: I am a professional freelance LEGO artist. My fondness for the LEGO System developed partly because of the challenge and restraint of the system. When ever something is called LEGO, that is what I relate it to. I sometimes see some pretty renderings of so-called digital LEGO builds on places like Flickr, and they are promoted as LEGO builds via LEGO groups. The problem is that these builds are often rendered with parts in colors that those parts have not been released in, and thus the build might as well have clone parts in it. That's when it does not belong in a group sharing things build with the LEGO System anymore. People doing this, could just as easily call it something else (Brick Art or something) and everything will be totally ok with me, but calling it LEGO is just misleading, frankly cheating. What do you guys think? Here is the latest example using a Slope 45 2 x 1 with 2/3 Cutout in Trans-Black for the windshield. I have nothing against the guy, but calling it LEGO just because LDD was used... Perhaps the problem only really lays with the groups accepting these contributions. -
Hi, i come with new creations! Since LEGO released a new BrickHeadz. Some peoples make a Various BrickHeadz creations (you can see in here), so i want to make my own. Here is some of my MOCs based on BrickHeadz range: Elvis Presley: and McDonald's Ronald (not a promotion): I don't know will i make other BrickHeadz MOCs, so just that for now! More information about these models in My Website!
-
Monas is a Local Landmark of Jakarta, Indonesia. Inspired by this Yul Burman Karel’s Monas MOC, but I redesigned it. Monas by Kamal Muftie Yafi, on Flickr I actually want to make this model for join this "Local Landmarks contest" in this forum, but the rules state: “All entries are to include only real LEGO. No clone brands, 3rd party parts, or digital entries allowed.”, Sadly, I don’t have all the part that need to create this model, though all the parts are exist in real life. Well, at least this could be an addition to my (digital) creations.
-
Yes, a classroom is the place for learning! Even though learning could be anywhere. I created an LEGO interior scene of classroom, this model is at minifig-scale. This model was mainly inspired by LegoJalex’s Classroom. Since that is a big built, I tried to make it small and more simple. Classroom by Kamal Muftie Yafi, on Flickr I used a unique technique to make the four-legged chair. I forgot where I got that chair design. If you know, please put a link in the comment, I just want to credit the builder.
-
Ramadhan is an Islamic month, it’s a special month where every muslims are fasting. It already started about 2 weeks ago so maybe it’s a little late to celebrate it but it’s not a problem right? As a celebration, I created an interior scene. So this is what I came up: Peaceful Ramadhan... by Kamal Muftie Yafi, on Flickr It was rendered using Blender via Mecabricks..
