THIS IS THE TEST SITE OF EUROBRICKS!
Search the Community
Showing results for tags 'speeder'.
-
This design goes from Lev-bike to armor.
-
Hello, Here I present my Swoop - a reminiscence to the one from Taris in the old KotOR video game. This one is a modern version and from coloring and design point of view reminding of Anakins pod racer*. Check out it's garage and how it's used as a set in my latest episode in the Mysteries RPG: * It came to pass that Ireused the pod from my M4-24 entry and modified it
-
So I was browsing Flickr and I saw some cool speeders. Feeling inspired, I experimented with a couple of parts and this is the end result. Enjoy! Cheers LMF
-
Just passing time with LDD and I somehow created a Blacktron III shadow speeder. (I think it was inspired by the Snow and Sand Speeder sets, such as 75204) The wings on the rear were exchanged for more menacing Batman ones, and the colors of the fold-opening windscreens changed to trans-yellow. The ship is 100% build-able, and would feature a printed 2 x 2 curved slope with the "B" from this online store called Brick Builder's Pro The rear of the ship features the engines and invisibility device cooling fins. Both canopies open up to place figures inside. The needed figures would be the Rench alien figure's suit from SP3, with the new Nexo Knights heads from this year's energy Vampire baddies and the helmet from Series 10 Paintball player CMF. Any thoughts on this idea? -
A little Mtron speeder I built awhile back. Enjoy! Cheers. LMF.
-
My first MOC since ages I was watching Episode II today and was a little bit upset that there is no update for the coruscant speeder pursuit. So I decided to make my own Coruscant Speeder. And with the first pictures of Han Solo sets appearing, I thought: "Lets make it Han Solos Speeder." And here it is. Totally flimsy. That is, because I only used the parts of set #75918. That made the building challenge a bit harder I hope you enjoy it.
-
Hello, I'd like to share with you my Canto Bight Police Speeder MOC I saw these in the last jedi and I found their design to be quite interesting so I tried to recreate them with my bricks. There are a few things that bother me with my design but it is the best I could do with the bricks I have. I mostly used the Hasbro toy as a reference (removing the huge cannons) since they aren't many good pictures for this vehicle yet. Let me know what you think of it
-
Hello Guys ! I show you my MOC of the Speeder Bike 614-AvA seen on the SW Rebels series. This MOC has closed dimensions of the minifig's scale (a little bigger) with 88 bricks. It's not perfect but better than the 75090 set I think. And next to my minifig's scale ITT (building instructions will come soon!) You can find my first tutorial to build it on my YouTube channel ! Link to Rebrickable : https://rebrickable.com/mocs/MOC-9726/BricksFeeder/speeder-bike-614-ava-from-starwars-rebels/#comments If you have some ideas or constructive criticisms, share with me please! I want to upgrade my skills! :) Enjoy and have a nice day! You can see my other topics : ITT : [MOC] ITT (Imperial Troop Transport) from SW Rebels TIE Advanced Prototype : [MOC] TIE Advanced Prototype (aka Inquisitor's TIE) from SW Rebels A-Wing (McQuarrie / SW Rebels Design) : [MOC] A-Wing (McQuarrie / SW Rebels Design) Batman's Batmech : [MOC] Batman's Batmech
-
Hello ! This is my first topic so I hope I got everything right in terms of format and stuff ! I'm working on a first draft of the Resistance's Crait speeder with my super limited parts collection. This isn't final (I've already changed up the cockpit since these photos) but I was hoping someone could give me advice about how to construct the hull surfaces around the technic beams connecting the 3 sections ? I don't have much experience using lift arms in builds but wanted this MOC to be able to bounce around and drop on the ground without falling apart ! Thanks !
-
Cave Racer by Sunder_59, on Flickr Model on Mecabricks: http://mecabricks.com/en/models/yr1211yw2lB
-
I was messing around with some parts from an order of special color parts I just got from Germany the other day and I created this little hover bike. It has two main round hover pads to stay afloat and four jets for speed. the doors on the side swing open to let the driver out and there is a back part that comes down to keep him in. That's about it, really, ha ha. I haven't created real back stories for any of my sci-fi models yet and don't really plan to until I get my layout setup.
-
I apologize for the bad pictures, poor light and even worse camera. I hope you can see my modifications anyway. Every speeder made by TLG shows the pilot seated instead of riding the vehicle, and I tried to solve that innaccuracy with this little mod. It doesn't need a lot of pieces and I think the overall look is improved. My only gripe is that if you remove Rey there is a gap in the pilot's place. Not a big deal for me as I am planning to keep this model for display only. As I read somebody asking about this, I can confirm BB-8 fits perfectly inside the speeder. This is the first MOD I post so please leave your feedback.
-
Location: H06 - Farmolis Tags: vehicle, land vehicle, exploration --Weekly Explorer's Transmission-- --Log of Eagle-Eye Silver-- --28 Septembrinali 3815-- Mr. LaRose called me back home to Farmolis to test a new toy speeder. The new model of the high speed Super Swiftsure! Zipping through the forests and plains of the Farmolis wilderness, I put the Mk. 2 through its paces. It’s not all that maneuverable really, but in a straight line on a chilly, low humidity day this speeder will approach 500 kph with a tail wind. While none of the Swiftsures—much less the “Super” models—have much in the way of cargo space for actual exploration gear and sensors, due to their range and speed, I told Jacques that the Super Swiftsure Mk. 2 ought to be standard issue for scouting missions on suitable planets to map potential points of interest for follow-up with more scientifically equipped explorers. --End-- C&C is always welcome!
-
Planet: C10 Marden Tags: Exploration
-
Hey guys im new here and i was looking a old/new lego sets - This is my moc/build of the republic speeder bike , there is no minifigers includes just the speeder bikes its self because of digital designer you can't get the decals on the minifigures Republic-speed_Bike-J_C.lxf
-
Hey everyone! This is my very first post, as you can probably tell. I've been wanting to share this moc/mod for a while and haven't really had the time to do so until now. I consider all of my projects to be WIPs because I'm always tweaking them, and I'm never completely satisfied for one reason or another. I'll be posting more mocs/mods soon, I hope. Rey's Speeder [MOD] by Joseph Karins, on Flickr Like a lot of others, I wasn't super crazy about the official set, but it had potential (and I wanted Rey and the other guy). I didn't set out to make a better version because I liked the vehicle (or the set). I just wanted to see if I could, to make a short story shorter. I've seen a lot of mocs and mods for this set and a lot of creative solutions. I really wanted to make the mudguard pieces work for the front of the speeder, which I thought were perfect. Most of the speeder still resembles the original set; the back section is nearly identical. It still looks like it's made out of LEGO elements, and could be something LEGO might've released. Most of the "playability" of the set has been lost (like the pointless stud shooters and rey's sled/hover board), which I don't think anyone here will complain about. I'll probably come back to this to see if I can make more use of the body of the speeder, but I'm happy with how it looks right now. A few comments on the build: The only modified part is the net, which I've made smaller (6x10 as opposed to 10x10). Also, the front grill is not actually attached to anything, but sits rather snuggly between the two side pieces and the top and bottom mudguards. I know some purists on the site are opposed to modifying pieces and "illegal" placement, but I've spent more time than I wish to admit trying to figure out how to attach the grill to the set. The way it looks is nearly perfect imo, and I dare someone to come up with a better solution! :P You'd make me very happy. I'm including the LXF file so that anyone can build it or improve/modify it at will! Not much else to say. Hope you like it! Questions, comments, and criticism are always welcomed! -JB PS - I'm not a professional photographer (lol). This is my first time trying this setup and I'm not super thrilled with the results. Rey's Speeder.lxf
-
This is my first space MOC here on Eurobricks, a Blacktron speeder. Tell me what you think! Blactron Speeder by ~Ben Stansfield~, on Flickr
-
The LEGO snow speeder design from Episode V (The Empire Strikes Back) of Star Wars fame has been using basically the same design for over a decade (since 2003's set 4500, actually) and I think I may have created a new way of doing it. Here is that 2003 set for reference. ....and here is my version: The models features a newer cockpit canopy courtesy of the Speed Champions theme and a nose made out of part 6153b. Yes, I removed the gunners seat / harpoon gun and added a astro-droid socket, but it's the same basic cockpit design and the look is still present if it were 100% screen accurate.... you could even back convert it into it's Episode V state quite easily. The roof of the canopy comes off to place the figure inside at the controls. The ship features two engines and two laser cannons, plus a astro-droid fits where the gunner usually would go. Okay, confession time: This model was made for use with my LEGO Universe - related Neo-Nexus Force stuff, and as such the wings should have this logo printed on the 2 x 2 curved slopes: http://alpha.brickli...68pb004#T=C&C=4 The model is featured along with the rest of the LU models in this thread there, but since it is also Star Wars related, I brought it home to this topic. Here is the LDD file in case anyone wants it: http://www.moc-pages...1462716991m.lxf Also, if anyone wants to see my other topic and it's models including the space base, its in the sci-fi forum at this link: http://www.eurobrick...howtopic=106512 EDIT: Version 2 This version features less slopes and a more angular roof canopy, plus a different rear windscreen. Comments, complaints, and questions welcome!
-
I'm running low on brown pieces at the moment so I had to settle for a somewhat smaller build :) It was more of a challenge than I expected building in such a small scale. Hope you enjoy it. Steampunk endor speeder MOC (4) by Andreas Lenander, on Flickr Steampunk endor speeder MOC (3) by Andreas Lenander, on Flickr Steampunk endor speeder MOC (2) by Andreas Lenander, on Flickr Steampunk endor speeder MOC (1) by Andreas Lenander, on Flickr
-
Here is my latest moc. I call it the UN-D11 Air speeder ...or maybe its a flying car, or a spinner, or a hovercraft... Lately I've been feeling a bit burnt out and have had a hard time coming up with the creative energy to put into building. Instead I've been spending a lot of time looking at concept art, going back and re-examining some childhood favorites to try to get some inspiration. I've also been thinking about going back to my LEGO moc roots. My first "serious" builds were speeders from and based on the Star Wars universe. Something about the cross of utility - the need to move people and things, with the styling - the industrial design of a consumer product - really appeals to me. I enjoy the tension there. And this is the result. Inspired by some of the sci-fi greats, Syd Mead, Don Davis and Peter Elison, I wanted to create something with exaggerated lines and a strong character but also plausible (As far as flying cars go haha). It ended up being a lot of fun and has helped spark my inspiration. I'm looking forward to building more of these weird fantasy vehicles! Thanks for looking! Do you have any artists that you turn to for building inspiration? Let me know in the comments.
-
Hi everyone, Here are the Silver Speeder and the White Witch from the 80's TV show Star Wars: Droids. I wanted to put in figs to show the scale of the vehicles but don't have anything approximating Thall Joben, or a Holiday Special era Boba Fett, so a few substitutions were made. The Silver Speeder (well, light bluish grey speeder) - 286 pieces The White Witch - 261 pieces
-
Just a quick build with just a few parts. I’ve built it in one hour. The Sand Speeder is a fast, small speeder for travelling and exploring the planet. Equipped with a laser gun. Pictures also on Flickr: https://www.flickr.com/photos/mathijslegofan/albums/72177720295356282
-
Hello everyone! I won't be wrong to say most of us now are looking forward for the Batman's remake. Because of an old promise and of the upcoming movie I want to show you this creation - nightspeeder. Main functionality - two projectile-launchers activated via separate buttons from the rear. Here are a slow-motion animation (maybe you should wait to load it) and some photos: If you want to build it - you can find building instructions here: Rebrickable Thanks for the attention!)
-
First, the Speeder Bike That Looks Like It Shouldn't be Able to Balance Like That but It Does. Officer Hoodbot is along to provide an example of typical, heavily armed and stylish, modern robot police personnel. Second, the Heretic bike, in Space Police livery. I call it heretic because the bike fairing is modified. I snapped the clips on the bottom somehow, on accident, then removed them entirely to fit in the two-stud-wide chassis. While here, I would like to nominate http://alpha.brickli...em.page?P=85861 for the Nobel Peace Prize, thank you all very much for your support
-
Wasn't sure if this belonged here or in Star Wars - but I'm more of a sci-fi guy so I hope this has landed in the right place. It's a take on Rey's Speeder but with classic Blacktron 2 styling. Let me know what you think!
.thumb.JPG.1493565333fc74a41021a3de1870838e.JPG)
