THIS IS THE TEST SITE OF EUROBRICKS!
Search the Community
Showing results for tags 'wwii'.
Found 24 results
-
Behind the barbarian name of Sd.Kfz. 250 mit 5cm PAK 38 hides a very rare variant of a WW2 German half-track. Sd.Kfz. 250 mit 5cm PAK38 by Veynom, on Flickr While the standard version was designed for troop transport, there were many variants fulfilling many purposes, just like its longer cousin the Sd.Kfz. 251. Sd.Kfz. 250 mit 5cm PAK38 by Veynom, on Flickr This model represents a 5-cm anti-tank gun (PAK) mounted on a modified Sd.Kfz. 250. It includes the side storage boxes and has a longer frame on the rear to provide more space to the gun servants. Sd.Kfz. 250 mit 5cm PAK38 by Veynom, on Flickr This variant was seen in Yugoslavia in at least 2 different models. One of them is exhibited at the war museum of Belgrade. It is unfortunately not in good condition with many missing components. Sd.Kfz. 250 mit 5cm PAK38 by Veynom, on Flickr I've decided to apply a winter color scheme, which was done by hastily splash covering the vehicle with some white color easy to remove. This explain why the grey is still visible at the bottom of the vehicle. This type of color scheme is likely to match a German unit fighting in Yugoslavia during the first months of 1945. Sd.Kfz. 250 mit 5cm PAK38 by Veynom, on Flickr My model is loosely based on the old 2014 BrickMania version. It is however recolored, rebuilt, detailed, and globally improved as the kit was rather old and no more matching today's standards. I think my version is a bit better. Decals come from my stash of old 1/35 scale models: license plates, black cross, red numbers. The front engine service door sticker is an official lego sticker, or rather, this is the cut-around of an official sticker. It had the right shape and color (LBG). This is a first try for me but I like the results. I will reuse this trick when I need to add more panel hatches or so. Minifigs are mixing multiple sources, from custom to official. Say "Hi!" to Dengar when you recognize his head. Sd.Kfz. 250 mit 5cm PAK38 by Veynom, on Flickr For fans that read until the end: Sd. Kfz. = Sonderkraftfahrzeug (special purpose véhiclel)This page gives many details about this specific Sd.Kfz. 250 variant.
-
Hello! I'm thinking of building a Balao-class sumbarine to honor a submarine that I spent a night on a few days ago. I'm not sure, however, what pieces I should use or how to design the engines/torpedo rooms; do you have any advice? Thanks!
-
Hello everyone. This is my last diorama and the bigger one I've ever made, work started last summer. I've spent about 5 months to build it (included all veichles, buildings etc.), in free time. there are about 25.000 pieces, I don't know exact number and I don't care. Diorama are based on 12 bases 48x48, 5 bases 32x32 and 1 base 16x32, approx 210x120 cm. I hope you enjoy it, please leave a comment and follow me on flickr, there are more pictures. Thank you very much to all and sorry for my bad english. Andrea, Kriminal, Italy.
-
Another go with a WW2 action scene. Here is a small vignette showcasing a German Nebelwerfer in action, probably on the East front. Nebelwerfer 41 in action by Veynom, on Flickr Nebelwerfer 41 in action by Veynom, on Flickr The model is mostly based on the BrickMania design, except for the wheels and ammunitions. The Nebelwerfer - literally "smoke launcher" - was originally designed as a rocket launcher with a name purposely chosen to deceive its true nature. Rocket researches in Germany started during the 1920s and were fruitful in the late 30s. The "Nebelwerfer" name was used to go around the restrictions from the Versailles treaty preventing Germany to develop and produce weapons. In reality, the Nebelwerfer could launch smoke, of course, but also combat gas and highly explosive rockets. It was used during the entire WW2 conflict on all fronts. As I do not like to simply "copy" an existing model, I also built a light blueish grey version which has a different undercarriage and mounting system. The undercarriage is based on a modified plate 2x2 with pins while the mounting system relies on a technic connector. It allows for larger and more realistic wheels and a lighter mounting system. Nebelwerfer 41 by Veynom, on Flickr Here, the rear view of both Nebelwerfers shows you the loaded one firing its first rocket (left) and one without any ammunition in it (right). Nebelwerfer 41 by Veynom, on Flickr Hope you like these. I have been contemplating to build a white-ish version representing the winter paint job used on the East front as well but I lack the necessary bricks. And I have no winter soldier as well. ;)
-
Ju-87 Stuka in Tmimi (Libya) - 1941 by Veynom, on Flickr This small scenery depicts a typical German Ju-87 R/2 (tropical version) in the Tmimi airfield in Libya during summer 1941. Historical photos show that at least 2 planes from the II/St.G 2 unit received this very particular paint scheme and only during summer (and maybe fall) of 1941. Reasons for this paint scheme remain unknown but it appears on multiple photos with 2 different plane markings for sure. I've built this for the "1941" contest of BrickMania. Ju-87 Stuka in Tmimi (Libya) - 1941 by Veynom, on Flickr The model - Junkers Ju-87 Stuka The Stuka is based on BrickMania JU-87 G-2 with quite a lot of modifications: The paint scheme is changed from DBG to tan and dark green. (and believe me, this can be tricky and costly) The nose and propeller are significantly different. The wings angle is slightly higher on my model to match with the real one. The landing gear has been changed (after 20 different trials, at least) Armament has been converted to a 500Kg bomb + fuel tanks under the wings (the bomb drop system is fully functional) Wing tips are different Tail and rear fuselage underwent significant changes to accommodate the paint scheme (and available bricks) The canopy is quite different Markings comes from various 1/32 scale models The bomb loader is custom and looks quite well like the original tool developed specifically for the Stuka The engine crane is classic. A few accessories are spread around, depicting typical working conditions in North-Africa. The Stuka was quite a challenging build, particularly given the limited available parts in tan and dark green. In the end, I like the results even if I think a couple of areas could still be improved. All bricks are 100% Lego except a couple accessories (some crates and 2 machine guns). The Stuka antenna is just a non-Lego black wire. Zoom on the bomb loading tool, developed specifically for the Stuka. Ju-87 Stuka in Tmimi (Libya) - 1941 by Veynom, on Flickr Ju-87 Stuka in Tmimi (Libya) - 1941 by Veynom, on Flickr Ju-87 Stuka in Tmimi (Libya) - 1941 by Veynom, on Flickr Ju-87 Stuka in Tmimi (Libya) - 1941 by Veynom, on Flickr Note: I have also designed a DBG + yellow tail variant of the Stuka that served on the Bulgarian front in 1941 but the model is not yet built. Note 2; No photoshopping was involved. The pictures with the desert background were taken in front of a PC screen with a desert wallpaper being displayed. The desert is actually from Libya of course.
-
Operation Stalemate II, September 1944 Marines of the 1st Division attempt to reach the sea wall under heavy enemy fire following an amphibious landing on the Island of Peleliu. Operation Stalemate II, September 1944 by Nicholas Goodman, on Flickr Operation Stalemate II, September 1944 by Nicholas Goodman, on Flickr Operation Stalemate II, September 1944 by Nicholas Goodman, on Flickr Operation Stalemate II, September 1944 by Nicholas Goodman, on Flickr Operation Stalemate II, September 1944 by Nicholas Goodman, on Flickr Operation Stalemate II, September 1944 by Nicholas Goodman, on Flickr
-
Moving Through Halfaya Pass, April 1941 Moving through Halfaya Pass, April 1941 by Nicholas Goodman, on Flickr Moving through Halfaya Pass, April 1941 by Nicholas Goodman, on Flickr Moving through Halfaya Pass, April 1941 by Nicholas Goodman, on Flickr
-
Good evening. This is my first post here in Special LEGO Themes; so far I appeared only in Star Wars department, so... hello everyone! To be honest, I wanted - finally, after so many unsuccesful attempts! - to build an early 76 mm turret (model 1940) for my T-34 tanks family but I failed again and then found some consolation building this - a tank destroyer / self-propelled gun SU-85, also based on the famous T-34 chassis. It happened very quickly (by my standards, anyway ;) ) - in just 5 or 6 evenings and virtually zero Bricklink orders. I'm pleased with the gun mantlet and general proportions of the model. Not so pleased with gap between glacis and side walls. And that's it, I guess. Please take a look at the photos. Comments welcome! P.S. I did not bother building ground plates just for this model - what you see in the last picture are modular plates I created for my ongoing Endor Project. False perspective rules ;) . SU-85 - left front by Maciej Szymański, on Flickr SU-85 - right front by Maciej Szymański, on Flickr SU-85 - top view by Maciej Szymański, on Flickr SU-85 - on the battlefield by Maciej Szymański, on Flickr
-
From Left to Right: English Guerrilla Soldier, Nazi Solder, German Rebel, American Soldier, and a Russian Commando. Let me know what you think!
-
Just a small build of scenery for a Panzer IV L/70 Advance through the Ardennes, December 1944 by Nicholas Goodman, on Flickr
-
The Sienar Technologies board of directors did not really appreciate that Rothana Heavy Engineering - one of their direct competitors - started selling the Katyoucha variant of their TX-225 tank to the Empire. (see the full article from 3 years ago here). Clearly, by proposing a relatively cheap rocket-launcher, Rothana would start grinding some of Sienar's market shares. But Sienar did not waste time before reacting and quickly started their own project of a rocket-launcher for the Imperial Army. In order to remain competitive from the pricing side, Sienar took two important decision. First, the new design should reuse as many existing components as possible. This first decision quickly make Sienar look toward their TIE families and existing designs. The second decision was to use the same model of rockets as Rothana. This would allow the Empire not to change their ammunition supply chain and permit in theory to quickly swap the Rothana TX-225 Katyoucha by the future design from Sienar. The project resulted in a fast prototype delivery and the TIE-Calliope was released. It was based on the existing TIE-Crawler which was already in use inside the Imperial Army but on tope of the existing Crawler a rocket launcher was mounted. But Sienar did not mount any small rocket launcher. They designed a rocket launcher that could carry no less than 50 rockets! And the TIE-Calliope could fire these one by one, in salvo, or even all of them within a handful of seconds. Useless to that the the impact of such firepower on any target was devastating. On top of that, the noise produced by the rockets during their flight generated a frightening feeling on the receiver's end. Thanks to this impressive solution, Sienar could even develop a great commercial argument: the ratio between the firepower and the deployed man on the field is way above whatever any competitor can offer (and almost 10x higher than the Katyoucha ratio). Indeed, the TIE-Calliope is equipped with 50 rockets, 2 blaster canons, and one turbolaser canon while only requiring a single pilot. On the other side, the TX-225 Katyoucha is only equipped with 16 rockets and 4 medium blaster canons and requires 3 crewmen to operate. Definitively, Sienar knows how to market their products. TIE-Calliope by Veynom, on Flickr But enough of the historical speech and let's discover the beast: TIE-Calliope by Veynom, on Flickr TIE-Calliope by Veynom, on Flickr TIE-Calliope by Veynom, on Flickr TIE-Calliope by Veynom, on Flickr Both of them together: TIE-Calliope & TX-225 Katyoucha by Veynom, on Flickr Naturally, before creating the Calliope variant, I had first to build a TIE-Crawler. Here it is, without its launcher. TIE-Crawler by Veynom, on Flickr You can see the 2x3 plates inside the track module panels. They were intended to receive the rocket launcher. In the final version, these plates were moved backwards. After all, when moc-ing, it is all about doing and undoing, isn't it? TIE-Crawler by Veynom, on Flickr TIE-Crawler by Veynom, on Flickr For those of you following our Desert Wars project, the TIE-Calliope will replace the Katyoucha as of June 24. Have a thought for the poor Katyoucha. Katyusha! by Veynom, on Flickr Please note that neither the TIE-Calliope, neither the TX-225 Katyoucha appear in any Star Wars material. They are both designs I created, aiming to propose ideas that could exist in the Star Wars universe. And while the old TX-225 Katyoucha was based on a soviet rocket launcher truck from WW2, the TIE-Calliope is based on a M4 Sherman tank variant. In the end, it is quite common to derive Star Wars designs from WW2 materials. Comments welcome, hope you liked it. PS: in the end, the Imperial Army selected the AT-AT from Kuat to mass equip their forces. Sienar and Rothana only received minor orders.
-
Supporting the Resistance, Western France 1944 Supporting the Resistance, Western France 1944 by Nicholas Goodman, on Flickr Supporting the Resistance, Western France 1944 by Nicholas Goodman, on Flickr Supporting the Resistance, Western France 1944 by Nicholas Goodman, on Flickr Supporting the Resistance, Western France 1944 by Nicholas Goodman, on Flickr Supporting the Resistance, Western France 1944 by Nicholas Goodman, on Flickr Supporting the Resistance, Western France 1944 by Nicholas Goodman, on Flickr -
Down the Net, Saipan June 1944 Down the Net, Saipan June 1944 by Nicholas Goodman, on Flickr Down the Net, Saipan June 1944 by Nicholas Goodman, on Flickr Down the Net, Saipan June 1944 by Nicholas Goodman, on Flickr Down the Net, Saipan June 1944 by Nicholas Goodman, on Flickr Down the Net, Saipan June 1944 by Nicholas Goodman, on Flickr Down the Net, Saipan June 1944 by Nicholas Goodman, on Flickr Down the Net, Saipan June 1944 by Nicholas Goodman, on Flickr
-
(snip)
-
Features: 2 x 8mm MG 4 x 20mm Cannon Canopy slides back to open Throttle lever Cockpit accepts a minifig pilot Naviagation lamps (red, green, white) Retractable landing gear National insignia built in bricks; no stickers used Camouflage painting applied on all sides using bricks Engine can be separated for inspection
-
Hi all, This is a German jet fighter in WW2. Features: - 4 x 30mm cannon barrels visible on the nose - National insignia made in bricks; no stickers used - Canopy opens backwards - Accepts a minifig pilot - Retractable landing gear - Navigation lamps (red, green, white) - Fuselage can be broken into 2 parts - A transparent support is required when the gears are extended because the tail is heavier than the nose. In the real fighter the nose would be way heavier because of the cannons and the engines, but my model is all ABS plastic so the weight difference cannot be put into practice.
-
Hi all, It's a Soviet light bomber used in WW2. You will see the building technique similar to that applied in my last model, Bf109E. Enjoy! Features: - 2 x 23mm cannons on wings - 2 x 7.62mm MG on wings - 1 x 12.7mm Berezin defensive MG (can be aimed freely) - 6 x 100kg bombs (4 carried inside the wings, 2 mounted below) - 8 x 82mm anti-tank rockets (laser shooter bricks) - Cockpit accepts 2 minifigs - Throttle lever tilts back and forth - Landing gear retracts completely into the wings (VERY sturdy as well!) - Navigation lamps. (red, green, white) It's an homage to the tradition of Lego's airport sets that always had navigation lamps on the commercial airliners. - Engine may be separated for repair - Intake and exhaust slits for the radiator and oil cooler - National insignia is made out of bricks; no stickers used. Designed to be visible from all sides. - All white winter camouflage - Retractable skis for landing/takeoff on deep snow (optional) I have posted a video on YouTube so that you can see the moving parts:
-
Hi all, The model is Messerschmitt Bf109, the most numerous German fighter in WW2, if not the most famous. I designed it from scratch and did not take features from other creators' work. I spent about 7 years designing and financing this project, and I finally finished it last year. Thanks to the work-from-home policy I don't have to drive as much, and I have more free time to share my creations with the world. You will see that some parts are in the new bluish grey while some parts are in the old grey. There are different patterns of 1x2 jumpers. A few parts even show cracks. This is the testament to the time spent to build this up, so I decided not to replace them with new parts in perfect condition. The 1x2x3 train door pieces and the 1x1 round plate with tow ball don't come in the new light bluish gray anyway. The building technique I used to make the aerodynamic fuselage is similar to the 3D wooden puzzle made out of interlocking thin boards. You can see the vertical and horizontal layers coming together to form a pixelated curvature. The width of the fuselage starts in 4 studs and reduces to 3 studs, then 2 studs, squeezing all the way to 1 stud. The internal connection is achieved with technic pieces, locking hinges and clips. I use it a LOT in my models because it allows you to add complicated painting schemes to the surface while maintaining the correct form and structural integrity. Notice that I still try to use as much slope/wedge/curved pieces as possible. Features: - 2 x 20mm cannons mounted on wings - 2 x 8mm MG on top of the engine (represented by a pair of black 1x4 hinge pieces) - 20mm cannon mounted coaxial with the propeller axle - Ammunition stowage (accepts any 1x2 tile as ammo belt) - Skeleton canopy opens/closes like the real thing - Cockpit has enough space to accept a pilot wearing an aviator helmet and a life jacket (new small type) - Throttle lever tilts back and forth - Instrument panel represented by 2 hollow studs in black - Service doors on wings - Landing gear retracts completely into the wings (VERY sturdy as well!) - Tail gear may be steered - Navigation lamps. (red, green, white) It's an homage to the tradition of Lego's airport sets that always had navigation lamps on the commercial airliners. - Engine cowl opens for inspection; exhaust pipes and ignition system visible - Behind the engine you can see the turbocharger intake and a hole for the hand crank - Fuel tank cap can be opened - Both wings may be detached for towing on road - Fuselage separates into 4 major components (to swap/combine painting schemes easily) - National insignia is made out of bricks; no stickers used. Designed to be visible from all sides. - A jettisonable fuel tank may be attached to the bottom I have posted a video on YouTube so that you can see the moving parts: Pictures: (The wings may look very fragile because they are hanging on the 1x2 locking hinge pieces, but there's another pair of clips inside the fuselage that connect to the top side of the wings. The wings are actually so strong that you can lift the whole thing by the tip of a wing. Details explained in the video.)
-
Well here's my 2nd MOC posted here on Eurobricks The all mighty Panther Ausf. G in 1/15 scale will full RC functions. Lego Panther Ausf. G 1/15 (RC) by Tommy Styrvoky, on Flickr and another pic of it with my cat James for fun. Lego Panther Ausf. G 1/15 (RC) by Tommy Styrvoky, on Flickr more Pics and info here http://www.mocpages.com/moc.php/388236 -
This year, is the 75th anniversary of D-day. This is a tribute moc of mine for those who fought for our freedom. I hope you enjoy it.
-
OK, I'll play too. I am excited about any reason to build an aircraft, but these last couple of days have been rough. I have drafted four ideas (F-86, TA-183, Air Racer, and DH Mosquito), and I didn't like were any of them were going. Getting the nose right is so tricky. Or I am too picky. So, here is the fifth idea, and we will see what can happen with this. It's not very ambitious, but I'll be able to get it done in time. And it fits with what I like to do, mid sized, no PF, and packed full of features. Dual Rotors Front and Rear Collective control Retractable landing gear Opening side door Rear ramp Which It's not much to start, but I have drafted some of the mechanics off to the side. I'll update again tomorrow. I am stuck on colors right now. Yellow and red is overdone, and I do not want too much white, so I welcome votes. Top/Bottom Orange, DBG Lego City White, Blue, and Orange Orange and LBG vertical panels Orange and DBG vertical panels Red and White -
- Train station 1944 - Finally I can show my new diorama 100% complete. I hope you enjoy my scene. Was so funny to build it. Please, check out my flickr page for more pics. about train wagons, tanks and other WWII veichles. Credits: -My BR23 was inspired by Ben Benekes model. -Panzer III it's a copy of Brickmania's set. P.S. I know, BR23 it's wrong to put into 1944 diorama (it's a 50's train) like the D.236 locomotive (this scheme of colours are post-war) but I love too much these 2 locomotive, especially with this scheme of colours. P.S. 2 Non-LEGO pieces (weapons, helmets etc.) by BRICKARMS, BRICKFORGE, BRICKMANIA P.S.3 Sorry for my bad english, I hope you can understand me
-
I’m in the plane stage of a lego project I have the blueprint to make a RC scale model of German Horton 229 from WWII. I thought it be cool to make it out Lego bricks (after seeing someone a very large replica of Air Force One ). The only problem I’m having is how the engine are designed into the plane. I want to be authentic on my design. I’m hoping not to ruffle any feather by asking for help with project. I just think it’s a pretty cool plane. I attached some pics of the real Horton 229 as it sit in the Smithsonian to be restored for the museum.. again I hope it ok to post these considering it still has all the original marking on the plane. I got those off the google to show the design of the engines. again I apologize if I offended anyone
-
When I was a kid in a primary school I had lot of fun with model-making of tanks, aircraft and armored vehicles from World War II. I also created some dioramas out of gypsum, styrofoam, wood etc. for models I made. Probably that's why I wanted to... Read more » https://www.youtube.com/watch?v=Ifi9fys03Ls Bigger photos and full story here: LEGO Gallery - [MOC] Sniper at church WIPs, Behind the scenes and other extras at my: Instagram | Facebook | Flickr
