Tamas Juhasz Posted October 3, 2014 Posted October 3, 2014 (edited) Hi all! I'm mostly a technic moc builder, and during the last few years, I didn't post about anything except technik, but now I'd like to present my mini tanks and self propelled guns. The theme is the first world war, except a few, there will be posted mocs only about real tanks. Prototypes, which were built in relality (but never seen combat), also can be found here. My concept: all tanks (no SP guns, because there was one-two prototypes only) are built in more or less microfig scale, my reference is the Tiger1 german tank, it's 6 studs wide, so 6 stud is 3,7 meter. So 1 meter is eqaul to 1,62 studs. The width is determinative, the smallest tanks are 3 studs wide, the small ones are 3-4, the mediums are 4-5. The heavy and super heavy tanks have 6 or 7+ width. All mocs in this topic are built only digital so far, but I'm planning to make them in reality, too, as my financial status and time allows. All tanks were made in LDD, and rendered with Pov-ray. I will update this topic frequently, as a new tank is done. Sooner or later I'll post also real pictures beside renders. Some tanks requires special stickers and thchniques (like covering a part to be in the requested color, or connect the tracks with strings), I will write that in these cases. I tried to use only real colored parts (except few cases, where they are covered with stickers). I tried to catch the characteristics of tanks, instead of being 100% proportional, but I tried to make them as proportional, as possible in this size. Sometimes there aren't a lot of possibilities to make proportional, for example: the tank should be 4,5 studs wide. Width can only be a round number, so a tank which should be 4,5 w, is disproportionate already. Main folder of all tanks: http://www.brickshel...ry.cgi?f=548239 I render one picture about one tank, if you want to see more, ask for it, I can make more in LDD, or render about the requested part/viewpoint. There will be a lot of mocs, so I also opened a topic for WW2 tanks, see here: http://www.eurobricks.com/forum/index.php?showtopic=100891 The tanks: 1. Renualt Ft-17: French light tank, mother of all modern tanks, the first one with 360° rotatable turret. Was quite fast and effective. Info: http://en.wikipedia....wiki/Renault_FT Big picture: http://www.brickshel...nualt_ft-17.png It's a typical 3 studs wide very little tank, but thanks to it's individual shape, can be recognize easily. 2. Mark IV (male version): The first british tank in combat, very iconic and famous. Had no suspension and was pretty big with more than one guns. Info: http://en.wikipedia....ki/Mark_IV_tank Big picture: http://www.brickshel...-IV/mark-iv.png The front shape around the tracks is very special, angled and rounded, I think brick technique is better here than plates. There isn't a lot of variations from hoses, the big cannons standard 3mm wide (like in most of my tanks), the smaller machine guns are screw drivers. I'm planning to make all significant ww1 tanks, like K-wagen, Tsar tank, A7V, Gun carrier Mark 1, Whippet, Saint Chamond, etc... to be continued... Edited December 25, 2016 by Tamas Juhasz Quote
Tamas Juhasz Posted October 3, 2014 Author Posted October 3, 2014 Hi all! I'm mostly a technic moc builder, and during the last few years, I didn't post about anything except technik, but now I'd like to present my mini tanks and self propelled guns. The theme is the second world war, except a few, there will be posted mocs only about real tanks. Prototypes, which were built in relality (but never seen combat), also can be found here. My concept: all tanks and SP guns are built in more or less microfig scale, my reference is the Tiger1 german tank, it's 6 studs wide, so 6 stud is 3,7 meter. So 1 meter is eqaul to 1,62 studs. The width is determinative, the smallest tanks are 3 studs wide, the small ones are 3-4, the mediums are 4-5. The heavy and super heavy tanks have 6 or 7+ width. All mocs in this topic are built only digital so far, but I'm planning to make them in reality, too, as my financial status and time allows. All tanks were made in LDD, and rendered with Pov-ray. I will update this topic frequently, as a new tank is done. Sooner or later I'll post also real pictures beside renders. Some tanks requires special stickers and thchniques (like covering a part to be in the requested color, or connect the tracks with strings), I will write that in these cases. I tried to use only real colored parts (except few cases, where they are covered with stickers). I tried to catch the characteristics of tanks, instead of being 100% proportional, but I tried to make them as proportional, as possible in this size. Sometimes there aren't a lot of possibilities to make proportional, for example: the tank should be 4,5 studs wide. Width can only be a round number, so a tank which should be 4,5 w, is disproportionate already. Main folder of all tanks: http://www.brickshelf.com/cgi-bin/gallery.cgi?f=548239 I render one picture about one tank, if you want to see more, ask for it, I can make more in LDD, or render about the requested part/viewpoint. There will be a lot of mocs, so I also opened a topic for WW1 tanks, see here: http://www.eurobricks.com/forum/index.php?showtopic=100890 The tanks: 1. Tiger 1 (Panzer VI): This was the first one in my series, it's my favourite german tank, and porbably the most famous of all tanks. Info: http://en.wikipedia.org/wiki/Tiger_I Big picture: http://www.brickshelf.com/gallery/mbmc137/Mini-Tanks/Tiger-1/panzervi.png This version is the latest, I made a lot of modification about it to reach this form. This moc is the size reference to all other, so I tried to do my best. The real Tiger1 is immensely wide (even wider than the Panzer VIII Maus, which is three times heavier!), and surprisingly tall, so it's a relatively big one in this serie. It's suspension conatins two rows of rollers, each roller is a 1x1 round plate. Pov-ray don't know "peral dark gray" and "flat silver" colors, this is the reason they are dark bluish gray. 2. Sturmtiger (Sturmpanzer VI): It's a heavy SP gun based on Tiger1, with an insanely big, 380 mm naval rocket launcher. Since I had the Tiger1 base, I had to make it also. Info: http://en.wikipedia.org/wiki/Sturmtiger Big picture: http://www.brickshelf.com/gallery/mbmc137/Mini-Tanks/Sturmtiger/sturmtiger.png The 2x2 holed round tile is one of the few exceptions of real colored part, I'm planning to cover it with tan colored stickers. 3. T-34: Soviet medium tank, one of the most succesfuls in the ww2. Very iconic and famous, it shouldn't be missing from here. Big picture: http://www.brickshelf.com/gallery/mbmc137/Mini-Tanks/T-34/t-34-85.png The big rollers are very characteristic, and they have a specific look, a bit similar to car rims. So I decided to connet some Lego rims to 3 mm rigid hoses (tight hoses hold the wheels enough "strongly", but, yes, a bit weak connection). This roller part and the holders were very difficult to make, consumed about 80 % of the construction time. 4. Panzer 38t: German (originally Czech construction) light tank, was very succesful. Info: http://en.wikipedia.org/wiki/Panzer_38%28t%29 Big picture: http://www.brickshelf.com/gallery/mbmc137/Mini-Tanks/Panzer-38t/panzer38t.png Nothing special here. This is a small tank, so it was harder to make proportional (should be 3,5 s wide). I'm planning to make all significant ww2 tanks/sp guns, like panther, the whole panzer series, king tiger, t-35, kv-2, Karl Mörser, T28/T95, sherman, jagdpanzers, ... etc. to be continued... Quote
robt Posted October 3, 2014 Posted October 3, 2014 Great MOCs! Your brickshelf gallery is private. http://www.brickshel...ry.cgi?f=548239 Quote
Tamas Juhasz Posted October 3, 2014 Author Posted October 3, 2014 Thanks. Yes, I know, it will be public after one or two days. Quote
grum64 Posted October 3, 2014 Posted October 3, 2014 (edited) Absolutely Terrific! To create these from so few bricks and still have them be instantly recognisable is amazing. Edited October 3, 2014 by grum64 Quote
Slurpifier Posted October 3, 2014 Posted October 3, 2014 Mark IV is my favourite here! Glad to see a few more WWI mocs here and there. Quote
Xcod119 Posted October 3, 2014 Posted October 3, 2014 Very nice WWI tanks! I look forward to seeing more! Quote
Xcod119 Posted October 3, 2014 Posted October 3, 2014 I LOVE all your tanks! They are just pure amazing, I cannot wait for the other builds to be posted! Quote
Tamas Juhasz Posted October 9, 2014 Author Posted October 9, 2014 Thanks all. 3. A7V: First german tank in combat, famous in ww1 theme. It was quite unsuccesful, but became on of my favourites in ww1. Easy to recognize from it's angular shape. Info: http://en.wikipedia.org/wiki/A7V Big picture: http://www.brickshelf.com/gallery/mbmc137/Mini-Tanks/A7V/a7v.png It was easy to build until the front part, there 3 plates connect to each other in the original, gave me a lot of thinking. Fortunately, it's longitudinally symmetric, copying parts worked. Quote
Tamas Juhasz Posted October 9, 2014 Author Posted October 9, 2014 Thanks all. New tanks: 5. King Tiger (or Tiger II, Panzer VI ausf. B, Königstiger): Heavy tank, used mostly in the end of ww2. Info: http://en.wikipedia.org/wiki/Tiger_II Big picture: http://www.brickshelf.com/gallery/mbmc137/Mini-Tanks/King-Tiger/king-tiger.png Has 9 (as the original) overlapped rollers, angled front and back, angled side armor. It's a tricky build because of the lot of angles, but it's size helps to hide the connector bricks. Contains 227 parts. 6. Jagdtiger: German heavy tank destroyer, built in the Tiger II chassis. Was unreliable, but had insane firepower with the 128 mm gun. "It was the heaviest armored fighting vehicle used operationally during World War II and is the heaviest tank ever to achieve series production." --> : http://en.wikipedia.org/wiki/Jagdtiger Big picture: http://www.brickshelf.com/gallery/mbmc137/Mini-Tanks/Jagdtiger/jagdtiger.png Built on the King Tiger's undercarriage, with little modification in the front. I added a gun holder. The parts count is the same as the King Tiger, 227. I was happy because I could use the 51739 wedge plate ( http://www.bricklink.com/catalogItem.asp?P=51739 ), with that the front of the turret is close to the original. Quote
LOTRfan Posted October 10, 2014 Posted October 10, 2014 Nice tanks! The Panzer is amazing, and I never even knew about the Jagdtiger. Please keep doing these! Quote
Tamas Juhasz Posted October 13, 2014 Author Posted October 13, 2014 Thanks, good to see you like them. Soon a Panzer VIII Maus will come. Quote
Cagast Posted October 14, 2014 Posted October 14, 2014 Soon a Panzer VIII Maus will come. Can't wait! Quote
lightningtiger Posted October 14, 2014 Posted October 14, 2014 AWESOME tanks.....my favorite.....the T-34......Brick On 'Mbmc' ! Quote
Tamas Juhasz Posted October 15, 2014 Author Posted October 15, 2014 (edited) 7. Panzerkampfwagen VIII - Maus German super heavy tank, two prototypes were finished, one was destroyed. Had two guns, a large 150, and a standard 75 mm. Weights 188 metric tons. Info: http://en.wikipedia....anzer_VIII_Maus Big picture: http://www.brickshel...erviii-maus.png It was pretty hard to build, despite it's relatively simple form. The front part is the most tricky with the track covering. The fuel tanks in the back are made from technic pistons, a standard 2 stud long black technic pin can be put into two of them, it holds them together. This unit is held by the cheese slopes. I put one more piston in this picture: http://www.brickshel...y.cgi?i=6165768 Edited October 15, 2014 by Mbmc Quote
Tamas Juhasz Posted October 15, 2014 Author Posted October 15, 2014 4. K-Wagen WW1 German super heavy tank prototype. It was almost finished until the end of the war. The germans partly copied the british tanks, here, most of the weapons are in sponsons. Info: http://en.wikipedia.org/wiki/K-Wagen It's a big one with lot of details, so I made two pictures: Big: http://www.brickshelf.com/cgi-bin/gallery.cgi?i=6165760 Big: http://www.brickshelf.com/cgi-bin/gallery.cgi?i=6165762 Overall it was a challenging build, a lot of work. The middle part was easy, only the track position was tricky, I think it looks good when the first and last track part is positioned/held by strings, pressed between the gray bricks. The shape of sponsons gave me a lot of thinking, in this size they have special stud dimensions, angles. I tried to catch the rounded and angled shape of the original sponsons. (The top of them can be covered with dark bluish gray stickers to have no gaps between them and the body.) Hope you like it. Quote
lightningtiger Posted October 15, 2014 Posted October 15, 2014 More awesome tank designs from you 'Mbmc'.....the Mark IV is the best one in my opinion......Brick On ! Quote
Tamas Juhasz Posted October 18, 2014 Author Posted October 18, 2014 Thx. I was a bit surprised that there was no Lego K-wagen before my build (I didn't find any with google pics and brickshelf). Maybe the reason is, it's not so popular/famous, but I like the shape and it's idea in WW1. --> must build If you have any suggestions to make it better, let me know. Quote
Tamas Juhasz Posted October 26, 2014 Author Posted October 26, 2014 Panzer 3 and it's variants: 8. Panzerkampfwagen III German standard battle tank, used widely during WW2. Info: http://en.wikipedia.org/wiki/Panzer_III Big picture: http://www.brickshelf.com/cgi-bin/gallery.cgi?i=6165764 I think these car rims look very similar to the original one in Pz3. Even the center looks authentic, like Lego would made this exactly for this usage. It has characteristic tracks and wheel sizes, I tried to catch them. 9. Stug III Tank destroyer based on the Panzer III chassis. Info: http://en.wikipedia.org/wiki/Sturmgesch%C3%BCtz_III Big picture: http://www.brickshelf.com/cgi-bin/gallery.cgi?i=6165769 Essentially it's a little modification of my panzer 3. The only challenge was, how to place the gun to to be low. 10. StuIG 33B Also a tank destroyer on Pz3 chassis, but much bigger, with much more firepower than Stug 3. Info: http://en.wikipedia.org/wiki/Sturm-Infanteriegesch%C3%BCtz_33B Big picture: http://www.brickshelf.com/cgi-bin/gallery.cgi?i=6165771 It was a more challanging build, tank destroyers with angled side armor and big upper part are always more challanging than they seems to be at first look. The picture tells a lot. I used the "big gun" (technic pin connector), it's 150 mm, like the Maus has. If the original has bigger than 120 mm, I use this part as main gun. A bit big, but somehow I have to differentiate the guns. (standard 75-90 mm gun is the 3 mm flex hose) Should I change something on them? What do you think? I'm courios about your opinion. If anything isn't clear (e.g. how are they assembled), feel free to ask. Quote
LOTRfan Posted October 30, 2014 Posted October 30, 2014 Please, Please, PLEASE! make a Panzer IV! These tanks are wonderful, and nice representations of slightly obscurer tanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.