LvdH Posted June 25, 2018 Posted June 25, 2018 Those 3L axles with stop just got rereleased. Maybe you could use them for your white Porsche MOD? https://www.bricklink.com/v2/catalog/catalogitem.page?S=10712-1 I got 20 of those blue bushings in my Sheepo Mustang Quote
TechnicRCRacer Posted June 25, 2018 Posted June 25, 2018 1 hour ago, Richard Dower said: also found four of the ultra rare Blue #3713 bushes Ultra rare? Huh, I have a few from bulk dumps and a copy of 4WD X-Track. Those white pins and the white 5L axle must have been hard to find! Quote
Maaboo the Witch Posted June 25, 2018 Posted June 25, 2018 1 hour ago, TechnicRCRacer said: Ultra rare? Huh, I have a few from bulk dumps and a copy of 4WD X-Track. Those white pins and the white 5L axle must have been hard to find! The blue bushes only appear in the X-track and a small Roboriders set (Ice Explorer). You have to ask "Why?". Quote
Richard Dower Posted June 25, 2018 Posted June 25, 2018 (edited) 2 hours ago, TechnicRCRacer said: Ultra rare? Huh, I have a few from bulk dumps and a copy of 4WD X-Track. Those white pins and the white 5L axle must have been hard to find! I have found 3L, 4L, 5L, 6L and 8L in White. Not many... Like 1 or two of each, I have 12L and 16L axles in White brand new. I have as already said found a few of #32062 in White. You need to be careful as some of the axles above exist in Milky White... They are sorta translucent. Edited June 25, 2018 by Richard Dower Added info Quote
TechnicRCRacer Posted June 28, 2018 Posted June 28, 2018 I don’t think I posted here, but I got some Technic test parts: The brown hinge is from model shop. Also (not in pic) I seem to have found some Technic pin with bush in rust(?) Quote
Zerobricks Posted June 28, 2018 Posted June 28, 2018 Where do you get these parts, they are awesome! You think you could get some fender panels in red or black? Quote
LvdH Posted June 28, 2018 Posted June 28, 2018 @Zerobricks They are from a bricklink store called Cornholio’s bricks from Belgium. He collects/collected these kinds of thing and has way more rare parts like that, such as smooth 2L axle connectors in blue, trans clear, blue and red 2L pins, and red train tracks. They’re all legitimate LEGO, just never released in a set. There are more sellers who have these parts. Magic Magnus or something (from Germany) has loads too. It’s very possible the fenders exist in red as that is usually used to test the moulds. I just haven’t seen any for sale, or even seen it at all. @TechnicRCRacer Regarding the rust pins, I think the seller just chose the wrong colour since there’s very very little difference between the two. And I do vaguely remember you posting these some time ago Still, cool parts. I’d like some of those XO liftarms. Quote
Leewan Posted June 28, 2018 Posted June 28, 2018 Here's the link to his flickr gallery : https://www.flickr.com/photos/148691465@N05/ There are some very special Technic parts : I don't know if all of these parts are on sale on his BL store, though. Quote
sirslayer Posted June 28, 2018 Posted June 28, 2018 is that mold growing on the beam??? never seen anything like that before Quote
TechnicRCRacer Posted June 28, 2018 Posted June 28, 2018 (edited) @LvdHYes, that’s the store! I did not find the rust pins from a BL store; I found them in a bulk dump. There is a very noticeable difference that makes them a much darker red, but not like the official Dark Red color. @LeewanThanks for sharing the Flickr gallery! I wish I could find a prototype part like the 16L half beam. EDIT: WOW. This collection is epic! Someday, I will find a black U-joint with a center! @sirslayer Not mold, yellow and black plastic somehow got mixed together to make a multicolored (marbled) part. In my copy of 10261 one of the white clips is slightly marbled with black or reddish brown! Edited June 28, 2018 by TechnicRCRacer Quote
LennyRhys Posted June 28, 2018 Posted June 28, 2018 @sirslayer there was a UK TV documentary on TLG and there was some information about transitioning from one colour of ABS to another. Some of the old colour plastic remains in the injection moulding machine and must be flushed out with the new colour, and these "marble" effect Lego pieces happen at every transition. They are supposed to be destroyed before leaving the factory but obviously someone has been naughty naughty and taken it home! Quote
Richard Dower Posted June 30, 2018 Posted June 30, 2018 Interestingly. the manual for 42056 shows the wheel hubs in Red https://m.imgur.com/a/imaL9uS On a certain website, ahem, you can find said rims in Metallic/Chrome colours..... I was thinking of ordering a set in Metallic Red to see what they looked like. Also on the same site the 5x7 open frame can be bought in multiple colours, such as Yellow/Red/White etc. There are other parts available in colours not available in official Lego colours. Ps. Not advocating fake Lego... Just stating it exists. Quote
1gor Posted June 30, 2018 Posted June 30, 2018 (edited) 6 minutes ago, Richard Dower said: Interestingly. the manual for 42056 shows the wheel hubs in Red https://m.imgur.com/a/imaL9uS On a certain website, ahem, you can find said rims in Metallic/Chrome colours..... I was thinking of ordering a set in Metallic Red to see what they looked like. Also on the same site the 5x7 open frame can be bought in multiple colours, such as Yellow/Red/White etc. There are other parts available in colours not available in official Lego colours. Ps. Not advocating fake Lego... Just stating it exists. I was hoping that TLC uses this red Porsche Rim for new CLAAS classic trctors with even bigger rear wheel. Just one question - did you find yellow one somewhere. Can you pm me a store where you find yellow and red frames 5 x 7? Thank you Edited June 30, 2018 by I_Igor Quote
Richard Dower Posted June 30, 2018 Posted June 30, 2018 Igor... Just do a search on Google, rather not pm links... As it could be interpreted as promoting fake products, sorry. Quote
LvdH Posted June 30, 2018 Posted June 30, 2018 Why would you go through the trouble of sourcing rare parts for a white one if you’re just going to use “different” parts anyway? Quote
Richard Dower Posted June 30, 2018 Posted June 30, 2018 4 minutes ago, LvdH said: Why would you go through the trouble of sourcing rare parts for a white one if you’re just going to use “different” parts anyway? I am not sourcing, just pointng out stuff exists. And I was forced to use 24 fake White parts, because Lego don't make them.... Yet. The chromed hubs look great in pics. So I just wanna see what they look like IRL.... If I like them and they match my theme I might keep them on the car. Quote
Gnac Posted June 30, 2018 Posted June 30, 2018 8 hours ago, Richard Dower said: I was forced to use 24 fake White parts No you weren't, you made a choice Quote
Bublehead Posted July 1, 2018 Posted July 1, 2018 44 minutes ago, Gnac said: you made a choice Which was heavily influenced by TLG due to unavailability of certain parts in certain colors. “Forced” is not far from the reality of having to make a choice which is based on an external party’s choices, here that being TLG’s public offerings of parts in known colors. I have felt “forced” many times by this same fact. You can’t make a pure Lego model in a specific color if they don’t make the parts in that color. I consider it being forced to use non Lego parts if they are available in the color you want to use by third party vendors. My color choice of red and black for my main model colors is not made lightly. More parts are available in red and black than most any other color beside lbg and dbg which are my chassis and frame colors. And if it wasn’t red and black it would be yellow and black. Quote
TechnicRCRacer Posted July 1, 2018 Posted July 1, 2018 One thing about the red Porsche wheel in the manual: I think I remember TLG mentioning it as a prototype wheel in a video somewhere. Quote
Richard Dower Posted July 1, 2018 Posted July 1, 2018 (edited) So I finally settled on DBG for the engine assembly, just to do something a bit different https://goo.gl/images/izDFe3 Edited July 1, 2018 by Richard Dower Quote
Gnac Posted July 1, 2018 Posted July 1, 2018 7 hours ago, Bublehead said: Which was heavily influenced by TLG due to unavailability of certain parts in certain colors. “Forced” is not far from the reality of having to make a choice which is based on an external party’s choices, here that being TLG’s public offerings of parts in known colors. I have felt “forced” many times by this same fact. Bootleg parts discussion was chased out for good reason; sophistry is no excuse to re-introduce it by stealth. Quote
Bublehead Posted July 1, 2018 Posted July 1, 2018 Not arguing for bootleg parts or discussing them, and certainly not trying to promote third party anything. just pointing out a choice is only free will when made without outside influence. Quote
Richard Dower Posted July 3, 2018 Posted July 3, 2018 (edited) I didn't know these parts were out!?.... I bought #32065 in DBG, I believe this 1x7 thin liftarms is new in that colour. I bought a few of #32192 in LBG, an old Racers set had said part years ago. Also I saw prototype parts in Red for #4274 on ebay, €4.99 a pop!... LOL, too rich for my blood. And I spent €2 each on those White #32054 pins. Edited July 3, 2018 by Richard Dower Typo Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.