Posted February 20, 201510 yr Streetcar PCC 551 I had built a generic European Streetcar/Tram that I posted here and had then been shown images of a local (to me at least) Streetcar used in Kansas City. Once I saw it I knew I had to build it. This is an 8-wide, 48 stud long recreation of that Streetcar. The were a number of different paint schemes used in PCC 551's history including one with a black swoosh down the side, but this one is a later version. I used the red tile on a headlight brick to represent the KC Public Service logo which is the Scout image. Here's an image of the original taken by Stephen Rees https://flic.kr/p/5unpgz The windows are 'authentic'. Apparently the head of the KC Public Services department decided that the traditional split windows that normally come with the PCC looked old fashioned so he commissioned the new single pane approach. Here's an image of the doors - they're inset half a stud using jumper plates and made up of a combination of SNOT plates and tiles, L-shaped plates and Darth Maul's Light Sabers! Here's the door build details Of course there's an interior! With seating for 19 Passengers and standing room for a further 11. And one final shot of the Streetcar with a couple of passenger's who probably won't get it. Comments, criticism and ridicule most welcome! Edit: Having a chance to think about the front end I'd like to show you this revised version Edited February 24, 201510 yr by eurotrash
February 20, 201510 yr Well, well. I see the hipsters have unloaded their Land Rover and are trying to get their outdoor gear onto the streetcar. I don't think the streetcar will get them to the white water down in the Ozarks. Seriously, that's a seriously great build. Wanna sell it? I'll thow in a cappuccino machine and some Maroon 5 CDs.
February 20, 201510 yr AWESOME 'eurotrash'......side view of it is beautiful and I wonder where one stores a canoe on a tram ? Brick On 'eurotrash' !
February 21, 201510 yr Nice work, PCC's are REALLY hard to do well in lego at this scale. Here's a little more info on a non KC PCC dressed up in KC paint and some background on the actual KC PCC that you modeled.
February 21, 201510 yr Author Fabulous. I used to ride those PCC streetcars to school and back. It could well have been this one dr_spock. Kansas City sold a bunch of PCC's to Toronto. This one was renumbered as TTC 4752 and ran for a years before being sold onto San Fransciso (where it was renumbered as MUNI 1190) before being returned to Kansas City. Here's a picture of it in TTC's livery Nice work, PCC's are REALLY hard to do well in lego at this scale. Here's a little more info on a non KC PCC dressed up in KC paint and some background on the actual KC PCC that you modeled. That link was my starting point. After I realised the narrowness of the Track gauge I knew I had to build it in 8-wide. So I took that schematic and downloaded it, then ran it through Sariel's excellent scaling tool (http://sariel.pl/201...r-tool-updated/) to work out the proportions. I then acquired some technical drawings from Transit Toronto's website (http://transit.toron...ar-4503-05.gif) And started building and rebuilding. The front went through three major versions before I worked on closing the various brick gaps, the rear went through more. The roofline was changed at the last minute as my last BL order was opened. In the meantime as I dove deeper and deeper into the rabbit hole I ended up with youtube home movies from the 50's. I think it's as accurate as I can get it be given the restrictions that Lego places on you and my skill level. It's been a fantastic building experience - I've discovered a bunch of new techniques and I've also learned a lot about US Streetcars. All, as a result from a passing comment by a LUG Group member. Edited February 21, 201510 yr by eurotrash
February 21, 201510 yr Someone in my LUG was recently talking about the difficulties of building a Lego PCC, and I can see what he's getting at. I like the tail and the doors, but the front seems a little flat. Specifically I think you're missing some of the tapering that happens before the windshield... it seems to me that the front and back surfaces should be more of a 7 or 6 wide when the body is an 8. Good effort on a tough prototype, though.
February 21, 201510 yr Tell Emmet the driver is in the union and he's on break. Not to worry, the emergency brake is on and the driver will return shortly.
February 21, 201510 yr Author Someone in my LUG was recently talking about the difficulties of building a Lego PCC, and I can see what he's getting at. I like the tail and the doors, but the front seems a little flat. Specifically I think you're missing some of the tapering that happens before the windshield... it seems to me that the front and back surfaces should be more of a 7 or 6 wide when the body is an 8. Good effort on a tough prototype, though. You're right on that tapering. It does need to come in more before the major curves at the front. I've got a multicolored 7-wide prototype of the front on the bench at the moment, but getting that 6-wide arch underneath is proving tricky. I'll post again when I've got it more dialed in. Emmet seems concerned that there is no driver There's no driver, the speed gauge is stuck somewhere in the middle, the roof's been ripped off and two fools are trying to get a flippin' canoe inside... Of course he's concerned... Thanks everyone for the comments.
February 22, 201510 yr There's no driver, the speed gauge is stuck somewhere in the middle, the roof's been ripped off and two fools are trying to get a flippin' canoe inside... Of course he's concerned... Just another day in Lego Suburbia...
February 22, 201510 yr It could well have been this one dr_spock. Kansas City sold a bunch of PCC's to Toronto. This one was renumbered as TTC 4752 and ran for a years before being sold onto San Fransciso (where it was renumbered as MUNI 1190) before being returned to Kansas City. Here's a picture of it in TTC's livery Actually the PCCs I rode to school were green. They had the "T" inside a white circle for MBTA. Toronto still runs its PCC on special occasions I think. I enjoy looking at them but not so much riding them. They aren't as comfortable as modern air conditioned streetcars. A couple of our LUG members built these for the LEGO Store Community window display. TTC Streetcars 2014: Above by calum.tsang, on Flickr
February 22, 201510 yr Another great MOC eurotrash ...I like also the baseplate you've done and the red bench!
February 22, 201510 yr I think it's as accurate as I can get it be given the restrictions that Lego places on you and my skill level. It's been a fantastic building experience - I've discovered a bunch of new techniques and I've also learned a lot about US Streetcars. All, as a result from a passing comment by a LUG Group member. Oh yes indeed, it is very accurate for any builder. Though now you know better than to have a conversation with that LUG member (grin)
February 24, 201510 yr Very nice. It reminds me of the historic trains running along the Embarcadero in San Francisco.
February 24, 201510 yr Very nice. It reminds me of the historic trains running along the Embarcadero in San Francisco. SanFran uses original PCC's along the Embacadero. I did a double take when the first one I saw was 1055 painted in the Philly livery complete with PTC logo.
February 24, 201510 yr Author Thanks for all the comments and feedback. I've had a chance to rework the front end to try and recreate the tapering in the original. Once you start looking for PCC's you see them everywhere! (I've amended the original post to include the new front end.)
February 24, 201510 yr The new nose design looks good! Though are you using the extra small wheels (Like so: http://www.bricklink.com/catalogItem.asp?P=50254 ) or the slightly larger ones: http://www.bricklink.com/catalogItem.asp?P=55423c01 ? I have the extra small ones on my 7 wide streetcars, and I can't run them due to the squeaking!
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.