Posted April 2, 20159 yr So I created this topic to see what future projects you might have. Hopefully this can become a source of inspiration for people that can't think of something to build or just want to find a cool idea. My future projects: Tuned Nissan GT-R http://www.gtspirit.com/2013/01/19/fast-and-furious-6-blue-nissan-r35-gt-r/ Features: Lowering suspension Small scale Two speed automatic gearbox Studless body Anyone recognize the GT-R? So what future projects do you guys have?
April 2, 20159 yr A few ideas I have are: Kenworth K104 tri-drive tractor unit International T line dump truck Scraper Kenworth K104 8x4 dropside tipper with matching 4 axle trailer (requires parts from 42043 to complete)
April 3, 20159 yr A GBC, based on a bucket wheel excavator, with some bionicle parts 'never' used before
April 3, 20159 yr I am designing an 8x8 with locking diffs and maybe planetary hubs at the moment in LDD. I am probably going to build NKubate's Predator as well. I am also going to build a machine similar to Nico71's Yes/No sculpture for the Brickvention next year and make a GBC module around it
April 3, 20159 yr i'm going to make a buggy. someone idea's for one. It would be some kind of baja 2000 or something
April 3, 20159 yr I'm thinking of this, but not sure how to capture the body panel shapes accurately In my opinion - it's a issue of scale ;)
April 3, 20159 yr The stickers are the best solution A ball peen hammer will also do the job. Not that I advocate modified Lego bricks. It's just a quick way to achieve that look.
April 3, 20159 yr I'm currently working on a small yet fast little car that's really fun to drive. Right now I'm on the bodywork, should be done in a week or so. Edited April 3, 20159 yr by Coola1
April 4, 20159 yr I'm attempting to build the Hennessey velociraptor supercharged, which featured in that Top Gear challenge. Progress is slow for me, it should have been finished but I haven't had time to finish it. It will have 4x4 through a 4 speed gearbox (if it even works) via 2 Xl motors. Body will be yellow, with a mix of studless bodying and panels. It will use the 42030 tires with the 42000 wheels. I want to try and make a custom engine, like in brunojj's laferrari. I also want it to be the best off-road technic pickup in terms of off-road capabilities and performance. Also an incredibly strong chassis. Last year I made an off-road suv prototype which could drive down a whole flight of stairs, and I want to make this pickup twice as good as that. If the gearbox works, it should hit a top speed of 5-7kmh (faster than my huracan). But the difference is, I want it to reach 5kmh on just about any terrain offroad.
April 4, 20159 yr Author I'm attempting to build the Hennessey velociraptor supercharged, which featured in that Top Gear challenge. Progress is slow for me, it should have been finished but I haven't had time to finish it. It will have 4x4 through a 4 speed gearbox (if it even works) via 2 Xl motors. Body will be yellow, with a mix of studless bodying and panels. It will use the 42030 tires with the 42000 wheels. I want to try and make a custom engine, like in brunojj's laferrari. I also want it to be the best off-road technic pickup in terms of off-road capabilities and performance. Also an incredibly strong chassis. Last year I made an off-road suv prototype which could drive down a whole flight of stairs, and I want to make this pickup twice as good as that. If the gearbox works, it should hit a top speed of 5-7kmh (faster than my huracan). But the difference is, I want it to reach 5kmh on just about any terrain offroad. Thats an ambitious project, I like it! Four speeds I think might hinder the trucks performance. I would go with three.
April 4, 20159 yr I have a few ideas for the next few decades (you can +1 them here)... So far, I've done the BMW R-12 motorbike and attempted the snowmobile (FAIL), the FINSA truck and nothing else. Features for each model are mostly in the air, I'll decide as I build. I'm currently trying my hand at bodywork, trying to build one for Sheepo's MAP... not going very well
April 4, 20159 yr I want to make it as big as I can manage. I reckon that it's first gear will have torque galore XD
April 4, 20159 yr I am still working on my Toolcat 5600, next up is Lamborghini Veneno (studless, no RC, 7+R gearbox, suspension and so on, actually I am working on chassis and gearbox already) and maybe then SaaB Aero X.
April 4, 20159 yr can you imagine the size of the bucket wheel excavator if its a complished gonna be huge
April 4, 20159 yr can you imagine the size of the bucket wheel excavator if its a complished gonna be huge Yes, but there has already been an attempt, an entry in the TC5 context. It's a fascinating machine, very complex, and rather 'imposing'
April 5, 20159 yr I had a list of things to build, including these that I've had in mind since 2006. But then I started building GBC modules. I've got enough ideas for that to keep me going well into the future.
April 5, 20159 yr Good luck with the pegaso and the komatsu wa-1200 I try to build them... Thank you! Will certainly need it
April 5, 20159 yr Considering that i just built a tourbillon, I´d like to ´´upgrade´´ it to a tri-axial or at least double axis tourbillon. Check out this video of my tourbillon and leave your opinion about it. https://www.youtube.com/watch?v=ieCcbiTtpps
April 5, 20159 yr I'm currently working on a road grader, F4U Corsair, and a forwarder (on hold for a while). I'm also working on a fully articulated tandem drive axle assembly for a yet to be determined truck. I may end up with two different axle designs. Other projects in the planning stages include two different tow trucks, a feller buncher, telehandler, AC700 crane, four different trucks, and some other things I'll probably never build.
April 5, 20159 yr I'm currently working on a road grader, F4U Corsair, ... Looking forward to seeing your F4U Corsair Edited April 5, 20159 yr by miguev
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.