Slave I display Stands

[ZCerberus]

As part of the Slave I Retrospective topic, there was a request to see how the display stands were built. Seemed like a time to fire up LDD.

Here is the stand-

and the LDD file is attached. I didn't bother to make sure the instructions were good, but using the LDD file should let you figure it out.

SlaveStand.lxf

[Superkalle]

Thanks for sharing.

Can't see the attached LDD file though

[ZCerberus]

Doesn't that figure Kalle? I had waited a long time for the photo to render, and perhaps I forgot to click attach after it was finally done. Let's try again! I added it back to the first post now. Thanks pal.

[__________________________]

This stand is more impressive than the actual model that sits on it.

[zoomatomic]

Great stand, thanks for sharing.

https://goo.gl/photos/QomKcY1AK361pX1RA

https://goo.gl/photos/5ao6gyvnMptAv3Js5

Replaced 2 x CONNECTOR PEG W. FRICTION 3M with 1 x CROSS AXLE 4M as it was physically impossible to connect it following the LDD.

[banckster]

Can you pls repost The ldd file for The stand  

[Cylo]

4 hours ago, banckster said:

Can you pls repost The ldd file for The stand  

The link is right under the text. And the link also works fine for me, so I'm not sure what problem you're having.

[banckster]

thank you, download worked after logging in.

 

Not able to open file in LDD v4.3, though. (unable to load file) and Null message in Bricklink

Edited November 18, 2018 by banckster
clarification

[banckster]

22 hours ago, banckster said:

Not able to open file in LDD v4.3, though. (unable to load file) and Null message in Bricklink

 

[Calabar]

Unfortunately ZCerberus uses forum's attachment feature to share the file, and with the new forum the lxf file are not an allowed format anymore. The result is that the file is not available now, the one you downloaded is an empty shell.
Luckily ZCerberus is still an active user, and you can try to contact it. 

PS: avoid to "up" a post so soon. It is not a correct behaviour.

[banckster]

Dear Calabar, Thank you for your response, also re. Behavior.  I am new to this format and apologize if i have misstepped. I Will contact user directly. 

[Seyguh]

Does anyone have a copy of the working .lxf file for this display stand? I've seen other comments mentioning that the one provided doesn't work, and I'm having some trouble as well. Any help would be greatly appreciated, as I would really like to build a few of these for my Slave 1's!

[Calabar]

I see the user is still active.

Did you try to contact him as suggested above, asking if he could fix the link with a working one?

Edited March 4, 2019 by Calabar

[Seyguh]

15 hours ago, Calabar said:

I see the user is still active.

Did you try to contact him as suggested above, asking if he could fix the link with a working one?

I have and it says that he hasn’t seen/read it yet, so fingers crossed! I’d even offer to commission somebody to do a tutorial video or simple instructions on how to build it, rather than playing around in LDD trying to figure out the parts and how it all goes together. As an adult, it seems that I just don’t have as much free time as I used to, so I’d happily pay a price in appreciation for someone else’s! 

[banckster]

hello, I simply made my own versions from the pictures, send me your email adress and I will send you some pictures of the stands. 

[olofmando]

Sorry for resurrecting this thread but I'm not allowed to PM Cerberus (error message). Could somebody please share the LDD with me? Very grateful if possible, thanks.

[Seyguh]

 

5 hours ago, olofmando said:

Sorry for resurrecting this thread but I'm not allowed to PM Cerberus (error message). Could somebody please share the LDD with me? Very grateful if possible, thanks.

Here's what ZCerberus said on the "Slave 1 Retrospective" thread regarding the stands:

I'd say there is a very, very, very good chance.

The thing is, I am out of town starting tomorrow for a few days on work travel, so as @Seyguh has learned, I have a busy life and putting it on my list may mean a few weeks before I have any time at all.

I would also toss in the semi-minifig scale one from Cloud City too I think.

As for the stands... without LDD support anymore and with a move to windows 10, I found making the instructions difficult.

I tried switching over to studio from bricklink to make the model, and it worked fine, but it seems I would need to put in more thought to make the instructions than I have time for.

I did a google search for a free place to host files and found one... no idea on the quality of the site or the like, but if you would like to try to download the instructions for bricklink studio, here you go!

http://s000.tinyupload.com/index.php?file_id=02896881536165477233

To get this to work on the newest Slave though, I needed to make some very minor revisions.

Check out the 20th Anniversary version of the stand here:

http://s000.tinyupload.com/index.php?file_id=75983208672416795028

 

He messaged me a couple of months back with the same links and they work fine but I don't have the time to pull everything apart on their and make instructions right now either. I would suggest clicking the "Follow" button at the top of this page, and the retrospective to stay updated on it, although it has been awhile since he last talked about it. 

5 hours ago, olofmando said:

Sorry for resurrecting this thread but I'm not allowed to PM Cerberus (error message). Could somebody please share the LDD with me? Very grateful if possible, thanks.

Also, I believe the reason for your error messages when trying to pm Cerberus is because you have only made 2 posts on your account. I think the minimum is 10 posts before you can message other users directly on the site (probably to deter spammers and bots). Hope this helps!

Edited June 17, 2019 by Seyguh