Jump to content
THIS IS THE TEST SITE OF EUROBRICKS! ×
THIS IS THE TEST SITE OF EUROBRICKS!

Recommended Posts

Posted

These look good!

You may want to change the Rodian and Duros (Blue dude) hands to match the skin tone or brown for gloves. Other than that, these would look great in an Endor diorama!

If you can find a couple of the old Endor battle packs cheaply, you can put them on a green base plate and build some small trees, then put some Ewoks, Scout Troopers and these figures, and that would look great!

The hands are tan, not light. They're already gloves, but yeah they are pretty similar in colour.

  • Replies 2.7k
  • Created
  • Last Reply

Top Posters In This Topic

Posted (edited)

The hands are tan, not light. They're already gloves, but yeah they are pretty similar in colour.

...Lego really needs to resurrect the dark tan hands they used on one version of Santis from Knights Kingdom II so many years ago (seriously, why only the one time?!)... it's a terrific color for gloved hands, and looks a lot better on Endor troops than the regular tan (which often seems too close to light flesh... tho for the Bith it's perfect for bare hands!), or the dark bley they used to use.

Edited by Venkefedo
Posted

...Hasbro really needs to resurrect the dark tan hands they used on one version of Santis from Knights Kingdom II so many years ago (seriously, why only the one time?!)... it's a terrific color for gloved hands, and looks a lot better on Endor troops than the regular tan (which often seems too close to light flesh... tho for the Bith it's perfect for bare hands!), or the dark bley they used to use.

Hasbro? Think you made a mistake there. :wink:

If you look at the Alliance pathfinders though tan is very much the correct colour for the gloves.

Posted

Hasbro? Think you made a mistake there. :wink:

If you look at the Alliance pathfinders though tan is very much the correct colour for the gloves.

So I did! Fixed (that's what I get for looking at some Hasbro lightsaber thing just before visiting that post)

While 'tan' seems fitting based on some toys & perhaps some images, dark tan really does look a lot nicer considering the Lego colors specifically. Lego tan is too light, and too close to the light flesh tone that it seems kinda jarring sometimes.

Posted

Ebkas was correct as changing the hand colour on the Rodian and Duros figs was planned but it obviously slipped my mind. I think we all agree the hand colour is very close to flesh so needs changing to brown. The dark tan sounds more fitting but I'm guessing if it was a one off it will be rare and expensive.

Posted

26964745460_34a96ddfff_c.jpg1 by That Orange Thing, on Flickr

26964747190_9173a04184_c.jpg2 by That Orange Thing, on Flickr

I just so happen to have been messing around with my Endor troops. As you can see i bought a few of the torso's off bricks n pieces so the waist printing doesn't match on some but hopefully i can update that with new green leg camo pieces later on. Thought I'd post this to show some of the experimenting I'm doing.

A couple of my favs are the Endor pilot with Hans blaster leg print and the figs that use the tan camo print from the recent rebel battle pack. The olive green dino hunter piece and brown gun slinger leg pieces are also interesting.

Forresto, can i ask what backpacks your using and what figs are the capes from as they look amazing?

Where does the legs for the middle figure come from as well as the head for the second figure from the right on the lower picture, the one with two red scars on both cheeks?

Posted (edited)

Those are supposed to be gloves? Come on Lego!

Actually, as Calanon said, those are a good match for the Endor troopers gloves. Dark Tan hands are a little pricey on BL, around 1-2 dollars.

Maybe you should have hands to match the flesh colours. That would be inaccurate but would look better than currently.

Oh, and anyone know how to update the minifigs in set 8084 Snowtrooper Battle Pack?

I can design a skirt for the Snowtroopers, and I actually like the black heads (Why did they change it to flesh?).

Any suggestions?

Edited by Ebkas
Posted

The only white legs with printing that work for snow troopers was to use the AT-DP Pilot's legs but that was for the new version. I'm unsure how that would work on the old snow troopers. Y

For kama you could buy these Kama Skirts. Light grey appears to be cheaper and I don't think light grey would look bad on the snow troopers.

Posted

The only white legs with printing that work for snow troopers was to use the AT-DP Pilot's legs but that was for the new version. I'm unsure how that would work on the old snow troopers. Y

I updated all my old snowtroopers using these (keeping the grey hips) and they look great. Best of all, the AT-DP driver legs are dead cheap on bricks and pieces.

Posted

I updated all my old snowtroopers using these (keeping the grey hips) and they look great. Best of all, the AT-DP driver legs are dead cheap on bricks and pieces.

How are you getting AT-DP driver legs from Bricks and pieces? They don't seem to be on there for me.

Posted

The only white legs with printing that work for snow troopers was to use the AT-DP Pilot's legs but that was for the new version. I'm unsure how that would work on the old snow troopers. Y

For kama you could buy these Kama Skirts. Light grey appears to be cheaper and I don't think light grey would look bad on the snow troopers.

For the legs that would probably look good. I will probably get some fabric and make my own Kama skirts or buy repros.

I updated all my old snowtroopers using these (keeping the grey hips) and they look great. Best of all, the AT-DP driver legs are dead cheap on bricks and pieces.

Do you have any pics of the Snowtroopers with AT-DP legs?

Posted

Anybody have any suggestion of a pieces to use to make the hair of Depa Bilaba, atleast for her curls? Im not mainly thinking of a hair piece here coz there is not anyone similar but something that with some painting and cutting can be close, the besr idea I got so far is the pretzel. Someone elsr got some idea of somerhing bettet?

Posted (edited)

Anybody have any suggestion of a pieces to use to make the hair of Depa Bilaba, atleast for her curls? Im not mainly thinking of a hair piece here coz there is not anyone similar but something that with some painting and cutting can be close, the besr idea I got so far is the pretzel. Someone elsr got some idea of somerhing bettet?

This with a painted pretzel piece at the back might look good.

Or just using a hood to cheat. :tongue:

Edited by Ebkas
Posted

Here we go - I don't think I'm the first person to do this. Solrry about photos, they were just quickies!

<snip>

Thanks! I'm gonna see the prices on BL for the AT-DP Driver legs.

Posted

Try bricks and pieces - they were really cheap - I've still got a big bag of spares after re-fitting 20 snowtroopers.

Wow!

I'll see.

Posted

I couldn't find it on B&P!

Ditto. Maybe the B&P selection differs per location, I can't really think of any other explanation.

Is there anyone who wants to snatch up a group of those AT-DP legs (and possibly other B&P pieces that I can't seem to find) for me?

Posted

Ditto. Maybe the B&P selection differs per location, I can't really think of any other explanation.

Is there anyone who wants to snatch up a group of those AT-DP legs (and possibly other B&P pieces that I can't seem to find) for me?

I came to that same conclusion.

Posted

I just checked B&P (from the Netherlands) and I couldn't find them anymore. So it seems they're gone everywhere. I was able to buy them before.

Well, that's annoying. BL seems like to only option to get it, except for buying the sets the Minifigure comes in.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.

Announcements

  • THIS IS THE TEST SITE OF EUROBRICKS!

×
×
  • Create New...