agoodfella77 Posted May 28, 2016 Posted May 28, 2016 I tried to see if I could run my nail along the groove where the flame meets the face/side of head and no chance - it was smooth as anything. I'm sure there will be a way to get it apart but from my quick look I couldn't see anything.. but then I don't customise my figures so I guess I don't know what I'm really looking for. It did look very shallow at the front of the head though so I'm assuming that's why it's one complete piece. Thanks for the reply. Is it the same for the pumpkin flame piece as well? Quote
Numbuh1Nerd Posted May 28, 2016 Posted May 28, 2016 How's Scorpion's tail? I'm not crazy about the way it just sticks up like that, but maybe it's better in person or moves or something? Quote
Captain Britain Posted May 28, 2016 Posted May 28, 2016 Thanks for the reply. Is it the same for the pumpkin flame piece as well? Yep same flame piece but different head underneath obv. I'll try take some better pics of the two of them if you'd like? How's Scorpion's tail? I'm not crazy about the way it just sticks up like that, but maybe it's better in person or moves or something? I quite like Scorpions tail but I had to lean him forward to stand up properly otherwise he just fell backwards. The tail doesn't move at all. I really like the minifig but I don't think I'm going to have a chance in hell in getting him to fit in my frame because it does feel quite bulky. Guess I'll give it a go in a minute and let you all know! Quote
agoodfella77 Posted May 28, 2016 Posted May 28, 2016 Yep same flame piece but different head underneath obv. I'll try take some better pics of the two of them if you'd like? Yeah, that would be great! Thanks! Quote
Captain Britain Posted May 28, 2016 Posted May 28, 2016 Yeah, that would be great! Thanks! Couldn't get the greatest on my phone but hope they help.. few more on my Flickr too.. Untitled by CaptainBritainDJW, on Flickr Untitled by CaptainBritainDJW, on Flickr And I've discovered Scorpion doesn't fit in the frame with his tail.. waaaay too big! Untitled by CaptainBritainDJW, on Flickr Quote
agoodfella77 Posted May 28, 2016 Posted May 28, 2016 Couldn't get the greatest on my phone but hope they help.. few more on my Flickr too.. Untitled by CaptainBritainDJW, on Flickr Untitled by CaptainBritainDJW, on Flickr And I've discovered Scorpion doesn't fit in the frame with his tail.. waaaay too big! Untitled by CaptainBritainDJW, on Flickr Thanks! Quote
KCMatze Posted May 28, 2016 Posted May 28, 2016 I think there's no way to get the piece of clean. It's really molded together and it even seems the stud on top of the headpiece is not fully intact, maybe melted down a little. I have those figures in hand right now... Quote
CM4Sci Posted May 28, 2016 Posted May 28, 2016 Is it clean on the little hole inside the head or is it molded into? Quote
Captain Britain Posted May 28, 2016 Posted May 28, 2016 I think there's no way to get the piece of clean. It's really molded together and it even seems the stud on top of the headpiece is not fully intact, maybe melted down a little. I have those figures in hand right now... Yeah it's definitely on there properly! They haven't done a half job that's for sure haha. I think if you tried to get it off it would butcher it up quite badly. Quote
vstat05 Posted May 28, 2016 Posted May 28, 2016 (edited) EDIT: Nevermind, my computer's lighting was just low. Edited May 28, 2016 by Raptor of Vengeance Quote
KCMatze Posted May 28, 2016 Posted May 28, 2016 (edited) Is it clean on the little hole inside the head or is it molded into? Not entirely sure what you mean. But it is not molded on the inside as far as I can tell. Tried taking a picture. Looks a little different then a normal head, though. LEGO Ghost Rider new head piece by Matze B., auf Flickr Edited May 28, 2016 by KCMatze Quote
legosamsonite Posted May 28, 2016 Posted May 28, 2016 Everything is now available in UK Lego stores, bar the Civil War Spidey. I'm loving Dr Ock's mech thing - so much playability and 'fun', I'd have adored this as a kid Could you post pics? Im on the fence about it Quote
Amazing Bricks Posted May 28, 2016 Posted May 28, 2016 I remember being very disappointed when I got the beorn set from the hobbit. It's like the same thing with ghost rider, the head was connected with the fur. Quote
CM4Sci Posted May 28, 2016 Posted May 28, 2016 (edited) Not entirely sure what you mean. But it is not molded on the inside as far as I can tell. Tried taking a picture. Looks a little different then a normal head, though. LEGO Ghost Rider new head piece by Matze B., auf Flickr Yeah, what is that? It's not a full circle, it's a circle that's cut off. Sighhh oh well. Probably inseparable. Edited May 28, 2016 by CM4Sci Quote
KCMatze Posted May 28, 2016 Posted May 28, 2016 Think so, too. Bad for interchangeable reasons, but I still like the figure. Would have been better with some flame/fire printing on the legs (like they did on the torso). Quote
LegoTFGuy Posted May 28, 2016 Posted May 28, 2016 Forgive me if this has already been covered, but since the new sets are out- do the Spider-Man sets come with an extra of the clear hand pieces that hold his webbing? Quote
Amazing Bricks Posted May 28, 2016 Posted May 28, 2016 Forgive me if this has already been covered, but since the new sets are out- do the Spider-Man sets come with an extra of the clear hand pieces that hold his webbing? I don't have the sets, but I don't think there's an extra. Quote
TheGlynreaper Posted May 28, 2016 Posted May 28, 2016 wooooo I cant wait Monday since all the summer sets will be available at my nearby LEGOLAND discovery centre store where I have £740 to spend and I also have a yearly pass giving me 10 percent off Quote
KCMatze Posted May 28, 2016 Posted May 28, 2016 Forgive me if this has already been covered, but since the new sets are out- do the Spider-Man sets come with an extra of the clear hand pieces that hold his webbing? According to the instructions there should be 1 in the Ghost Rider set and 2 in the Bridge Battle set. I now have a total of 6 of the new pieces! So that should be a yes on extras! Quote
LegoTFGuy Posted May 28, 2016 Posted May 28, 2016 According to the instructions there should be 1 in the Ghost Rider set and 2 in the Bridge Battle set. I now have a total of 6 of the new pieces! So that should be a yes on extras! Awesome, thank you! So if I get the Ghost Rider set and the Civil War set I should have a total of 4- plenty for Spidey with some for Iron Man. Quote
NXS7 Posted May 28, 2016 Posted May 28, 2016 According to the instructions there should be 1 in the Ghost Rider set and 2 in the Bridge Battle set. I now have a total of 6 of the new pieces! So that should be a yes on extras! Plus they'll be one in the Doc Ock Mech and one in the Civil War set Quote
Butterfingers27 Posted May 29, 2016 Posted May 29, 2016 Awesome, thank you! So if I get the Ghost Rider set and the Civil War set I should have a total of 4- plenty for Spidey with some for Iron Man. That is precisely what I intend on using them for as well. Quote
ReZourceman Posted May 29, 2016 Posted May 29, 2016 Couldn't believe it when I found the Ghost Rider set in Tesco, Kingston, MK yesterday. They had some new Nexo Knights, and as I walked off, just from excitement and triple checking, I turned around to see if there was anything else, and out of the main LEGO bit, behind a banner advert, it was sitting there so nearly missed it. Was looking forward to Ghost Rider the most, but I have to say, Hobgoblins steals the show for me! Quote
Captain Britain Posted May 29, 2016 Posted May 29, 2016 According to the instructions there should be 1 in the Ghost Rider set and 2 in the Bridge Battle set. I now have a total of 6 of the new pieces! So that should be a yes on extras! haha same here , although I think I managed to somehow ping one across the room so that's probably lost into the abyss until I tread on it in a few months time. Glad we got extras though! Quote
Galaad Posted May 29, 2016 Posted May 29, 2016 Forgive me if this has already been covered, but since the new sets are out- do the Spider-Man sets come with an extra of the clear hand pieces that hold his webbing? There is a second one in the GhostRider's Set Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.