Would you mind sharing the link to your bricksafe, thanks

1 hour ago, tismabrick said:

Would you mind sharing the link to your bricksafe, thanks

https://bricksafe.com/pages/gbcbuilder/akiyuki

Found it, thanks.

I thought that when you’re speaking about instructions that there will be a pdf file or something similar.

@Doug72 Can you pleas edit the information to this module so that this is clear and also link directly to the .io file. That would be great. Link: https://bricksafe.com/files/gbcbuilder/akiyuki/type-1-train-/akiyuki train v1 L motor.io

 

Edited August 2, 20204 yr by tismabrick

The link does not work.

Try this

https://www.bricksafe.com/files/blakbird/Renders/MOCs/crane-loader/Akiyuki Train Module.pdf

Edited August 2, 20204 yr by Doug72

The links does work if you include the rest till the end [...].io: “https://bricksafe.com/files/gbcbuilder/akiyuki/type-1-train-/akiyuki train v1 L motor.io”

The pdf you mentioned is from 2016. I was referring to the mentioned new instructions of @9v system which turned out to be a .io file

 

Edited August 2, 20204 yr by tismabrick

@9v system can you provide the required link for your improved type 1 train, I am unable to open bricksafe files.

Is this what you are after ?
akiyuki train v1 L motor.io

I am unable to open this file nor provide a link as it directs me to Apple books !!!!

Edited August 2, 20204 yr by Doug72

4 hours ago, Doug72 said:

@9v system can you provide the required link for your improved type 1 train, I am unable to open bricksafe files.

Is this what you are after ?
akiyuki train v1 L motor.io

I am unable to open this file nor provide a link as it directs me to Apple books !!!!

you need stud.io to open it

@Doug72 how did you go? were you able to open it?

10 hours ago, 9v system said:

@Doug72 how did you go? were you able to open it?

NO - I can download Stud.io but cannot open it. I use Mac OS Catalina 10.15.6 and there are problems opening files that are not 64 bit.
If you can supply the correct link I will add it to the GBC Train forum.

 

Edited August 4, 20204 yr by Doug72

@Doug72This IS the correct link for the stud.io file. You need stud.io for opening it. Just download the file, open stud.io and select the file you just downloaded. It really works here on my Windows machine.

Edited August 4, 20204 yr by tismabrick

42 minutes ago, tismabrick said:

@Doug72This IS the correct link for the stud.io file. You need stud.io for opening it. Just download the file, open stud.io and select the file you just downloaded. It really works here on my Windows machine.

As said earlier I can download stud.io BUT cannot OPEN the file.

Edited August 4, 20204 yr by Doug72

But that’s not the problem of the stud.io file. It seems to be a problem of your Max Os version.

I know that it's a catalina Problem

Edited August 4, 20204 yr by Doug72

@Doug72 go to Settings -> Security & Privacy -> General and enable App Store and identified Developers.

It worked for me.

6 hours ago, dunes said:

@Doug72 go to Settings -> Security & Privacy -> General and enable App Store and identified Developers.

It worked for me.

Tried that but still the same message. Will have to wait until my son - an IT engineer visits after lockdown ends.
I don't invisage using it for building Lego anyway and will just post the file name (I can't find a way the activate it)  to the Type 1 Train unit mod by @9v system

Edited August 4, 20204 yr by Doug72

thanks @Doug72 theres the updated switch unit there as well

@Ankoku those renders are ready for the front page

Okay, I am away for a week in a few hours. So I will do it next weekend. Apologies for the delay!

thanks to @Lego_GBC_NL i have produced a file for the loader switch, it is quite simple and runs of the unloader unit by the 24t gear and a universal shaft

@Doug72 are you able to add this to the train thread as well please?

6 hours ago, 9v system said:

thanks to @Lego_GBC_NL i have produced a file for the loader switch, it is quite simple and runs of the unloader unit by the 24t gear and a universal shaft

@Doug72 are you able to add this to the train thread as well please?

Not at the moment - see PM I have sent you.

3 hours ago, Doug72 said:

Not at the moment - see PM I have sent you.

just checked my PMs but i havent received anything yet

On 8/8/2020 at 12:27 PM, 9v system said:

just checked my PMs but i havent received anything yet

I would suggest you make a post on the GBC Akiyuki Train, mods & improvements forum thread with all your Type 1 train system mods, then I will make a link to that posting from the index page to it.

Doug72

Edited August 10, 20204 yr by Doug72

On 8/4/2020 at 10:47 AM, dunes said:

@Doug72 go to Settings -> Security & Privacy -> General and enable App Store and identified Developers.

It worked for me.

Have now managed to install stud.io after many attempts - interrupted by the “Expired Certificate” for Eurobricks.

Glad to hear @Doug72

Does anyone know if the Akiyuki six axis robot arm has already been reverse engineered? I am interested in working on the official module that uses that specific mechanism.

2 hours ago, Ethan M said:

Does anyone know if the Akiyuki six axis robot arm has already been reverse engineered? I am interested in working on the official module that uses that specific mechanism.

Which one are you looking at?

I have done most of the first one and the first section of the second.

Here is a link to what I started for the second one. https://bricksafe.com/pages/HRU_Bricks/robot-arm-mindstorm--technic

The first build is on hold

There was one on YouTube  - 

More details http://www.juggle.cz/LegoEv3dev2bricksCom.asp

 

Edited August 14, 20204 yr by HRU_Bricks