Lego Licensed Parts available from Bricks & Pieces

[MAB]

18 hours ago, eldiano said:

From 40567 forestmen hideout, lol They finally added the forest men and lady lower green legs LOL, you could only get them if it was legit missing from your lego set but I had to purchase them through bricklink! I should had waited haha

Weren't the green legs cheaper on BL (aside from shipping)? I got rid of loads over the past couple of years, green always go quite cheap as demand is not very high.

[eldiano]

3 hours ago, MAB said:

Weren't the green legs cheaper on BL (aside from shipping)? I got rid of loads over the past couple of years, green always go quite cheap as demand is not very high.

Thinking about it, at this rate they were handled faster and cheaper than LEGO, i remember buying them for .07 cents, and I just saw the pricing from lego for .58 cents for them on LEGO, massive difference I think.  Shipping is where it’s at the moment and Bricklink will deliver faster and cheaper, in 2021 Pick a Brick was king for this hehe

Edited January 6, 2023 by eldiano

[Brick Cucumber]

I haven't been kept up with B&P for a while. Really wanted to place a Jan order but I hate this Standard and Bestseller seperation. I just want to buy some parts. When's standard going to be available again

[Maple]

Those castle visors are already OOS. I really wish LEGO would smarten up and put in limits for minifigure parts and animal molds.

[MAB]

46 minutes ago, Brick Cucumber said:

I haven't been kept up with B&P for a while. Really wanted to place a Jan order but I hate this Standard and Bestseller seperation. I just want to buy some parts. When's standard going to be available again

The date they used to turn the old replacement parts service back on varied a bit, but typically end of Jan into Feb.

[Capybara554321]

2 hours ago, Maple said:

Those castle visors are already OOS. I really wish LEGO would smarten up and put in limits for minifigure parts and animal molds.

Or they could put them on backorder and keep making them till the interest dies. 

[MAB]

4 hours ago, Maple said:

Those castle visors are already OOS. I really wish LEGO would smarten up and put in limits for minifigure parts and animal molds.

They do. 200 per order!

Edited January 6, 2023 by MAB

[Maple]

5 hours ago, MAB said:

They do. 200 per order!

I know, but for some pieces it should be like 25 for others it should be 500. I think I said it before but no one needs 200 baby cows or sheep. 25 per order would be great.

7 hours ago, Capybara554321 said:

Or they could put them on backorder and keep making them till the interest dies. 

Or they can make a limit of 25 until the interest dies. They can't make every piece all the time. 

[jonwil]

Absolutely the high demand stuff should be limited quantity. Things like animals, Castle and space fig parts etc. 

[MKJoshA]

I'm wondering if the Lego pulled the helmet visors rather than scalpers buying them up. Odd that only those 2 pieces should up as new. Seems plausible that Lego pulled them until more parts are released.

[Pchan1983]

Interesting, the piglet, lamb and calf turning up as Best Seller for New Zealand.

[upliftingbricks]

1 hour ago, Pchan1983 said:

Interesting, the piglet, lamb and calf turning up as Best Seller for New Zealand.

Quite a few parts have moved to Bestsellers including some non Yellow heads and torsos. Very interesting. Are the animals cheaper than before? Cant remember the price before

[Brick Cucumber]

50 minutes ago, upliftingbricks said:

Quite a few parts have moved to Bestsellers including some non Yellow heads and torsos. Very interesting. Are the animals cheaper than before? Cant remember the price before

It's really facinating that the pieces from last year's standard parts have now appeared as bestsellers. Hopefully this years parts come soon...
 

[BitByBrick]

3 hours ago, MKJoshA said:

I'm wondering if the Lego pulled the helmet visors rather than scalpers buying them up. Odd that only those 2 pieces should up as new. Seems plausible that Lego pulled them until more parts are released.

The visors do not appear when searching with the out-of-stock option. Would this indicate that they were pulled rather than sold out? Saw them for a day or two, couldn’t get myself to buy any as there wasn’t anything else new to justify a purchase. 

[jodawill]

3 minutes ago, BitByBrick said:

The visors do not appear when searching with the out-of-stock option. Would this indicate that they were pulled rather than sold out? Saw them for a day or two, couldn’t get myself to buy any as there wasn’t anything else new to justify a purchase. 

The out of stock parts haven't been viewable for several weeks.

[eldiano]

2 minutes ago, BitByBrick said:

The visors do not appear when searching with the out-of-stock option. Would this indicate that they were pulled rather than sold out? Saw them for a day or two, couldn’t get myself to buy any as there wasn’t anything else new to justify a purchase. 

Nothing’s the same anymore, once they run out of stock for the time being they completely disappear from bricks and pieces.  The number of bricks in November was around 12,000 now it’s like 11,200.  Who knows what’s LEGO at’s play here, your best bet at this rate is brick link, sad to say though in 2021 Pick a Brick was the better alternative.  

[Pchan1983]

4 hours ago, upliftingbricks said:

Are the animals cheaper than before? Cant remember the price before

looking at previous invoice, the price are the same.

[Roebuck]

14 hours ago, Pchan1983 said:

Interesting, the piglet, lamb and calf turning up as Best Seller for New Zealand.

Make sense I guess since a LOT of people are buying them, makes it more likely I will buy bestseller parts in the future..
I think it is likely the standard parts show up soon with a lot of new and interesting ones  Hope I get them before they sell out

[hsousa]

On 12/31/2022 at 3:35 PM, Maple said:

We have 11633 pieces in the USA. 

Not in Europe. For two weeks now, " Standard Pick a Brick parts" is unavailable.

[cebelicamya]

Austrian Pick a Brick has only 3275 parts available and still no standard parts. I don't like the service anymore, in 2020 it was much better than now. @BitByBrick i am so jelous that in usa u have 11,200 pieces to choose from, at least lot more than what is currently available in austrian/german site.

Edited January 9, 2023 by cebelicamya

[Themiddlebrick]

EU/UK/AU standard PAB was shut down as they expand the Poland bestseller warehouse which will go from approx. 1000 elements to over 4000. Once that transition is done the standard PaB will reopen. In the end these regions will have a much more robust bestseller collection to choose from as well as the full selection of Standard parts. August and September parts should be added when Standard re-opens as well followed by the return of the regular schedule for releasing new parts.

 

[anothergol]

Sounds bad to me. I've avoided "best seller" because I always place orders especially for new parts. In the past I was refilling some older parts as well but now that it's in another category I just avoid it, so I was happy that not much stuff was labelled as best seller.

[Clone OPatra]

3 hours ago, Themiddlebrick said:

August and September parts should be added when Standard re-opens as well followed by the return of the regular schedule for releasing new parts.

 

Which regular schedule - the old regular B&P schedule when parts were released pretty much upon the release of new sets, or the new PaB schedule of 3-6 months post set release?

As long as new parts don't get immediately added to bestseller, this works for me but I can see how it'd be annoying for a lot of people. I wonder what the timeframe will be for shifting parts from Standard to Bestseller going forward as well. For example, if I was to wait for new Jan parts to hit the service, would the August/September/October 22 already be on Bestseller by then or would they still be Standard so I can order everything I want together?

Given the exorbitant shipping cost for Australia, it isn't economical to order the new parts every time they are released unless it's a very large release period like Jan.

[jonwil]

The schedule of parts comming out a few months after set release is how its going to be going forward.

 

[Lion King]

I’m trying to find some printed 1x4 or 2x4 tiles that have wooden grain pattern. Like a 1x3 tile rom CMF Series 13’s Carpenter. 

Do you know if there is any existing element IDon the wooden planks?