Murdoch17 Posted December 27, 2015 Posted December 27, 2015 (edited) Here you will find all my completed train - sets. Some are based in reality, while most are works of fiction... The General Motors "Aerotrain" (Rock Island #3) Historical background on the Aerotrain: The experimental Aerotrain was built by General Motors using hard riding Bus Bodies for coaches, a new untested (and quite complicated) air cushion suspension system, and an under-powered motor originally made for switching locomotives. Two of these trains were built in the 1950's as a way to entice passengers back onto the railroads and out of their automobiles. The hard-coupled unit had one engine and 10 cars attached, including the observation car. These low-slung units toured the United States as a test of it's abilities. Needless to say, it was a tremendous failure. It toured on four roads including the Atchison Topeka & Santa Fe, New York Central, Pennsylvania Railroad, & Union Pacific before eventually being sold to the Rock Island for Chicago Commuter Service. In 1966, after less than a decade of service, one locomotive & two cars were sold to the National Railroad Museum in Green Bay, Wisconsin, while the other locomotive and two cars were sold to The Museum of Transportation in St. Louis, Missouri. Model Notes: The original train had ten cars, which would be hard to do in Lego (and it's kinda pointless as 9 of then are identical) I have five cars on my train, four identical coaches and one observation coach on the end. My Inspiration for this model came from three pictures from this Brickshelf account here: http://www.brickshel...ry.cgi?f=497396 and I give 99% of the credit for the model to Brickshelf user enquete-art. The other 1% comes from me, such as the reworked wheels, front and back windshields, window SNOT work and red number tile. ....and yes, the middle two car are backwards. Ii noticed that a little too late! :-( The train can no longer separate into sections, as the magnets on the loco kept separating from the train. I replaced them all with draw bars made from Technic lift-arms, which is more like the real thing anyway. Also, the model takes curves reasonably well, so my fears of it not working were unfounded. This is the tail end of the train. The Southern Pacific "Forgotten Daylight" #4460 Real world background info on the 4460: During World War II, the US Government controlled the railway locomotive builders, one of which was Lima. Southern Pacific submitted a order to Lima Locomotive Works for 16 new 4-8-4 steam engines, (known as Daylights) which was turned down. Southern Pacific reworked the blueprints to have little streamlining, and not feature the Daylight's color scheme of orange, red and black. These new engines were painted in silver and black, and were also smaller. Lima finally green-lighted the order in 1943, but with one condition: Six engines would be taken from the order and given to the power-starved Western Pacific Railroad. Because of their smaller size and the fact they were built during WWII gave these engine the names "Baby Daylights" and "War Babies". Officially, they were called GS-6 and numbered 4460 - 4469. (GS meaning General Service or Golden State, and 6 because they were the sixth batch of engines.) Only one of the GS-6 type survives: 4460, often referred to as the Forgotten Daylight when compared to it's famous GS-4 cousin 4449. Model Notes: This engine was inspired by Anthony Savas 2-6-4 Pacific, but uses design cues from his 2-8-4 Berkshire, the Emerald Night, the pistons from Zephyr1934's lone Ranger engine MOD and the original tender frame from the first incarnation of the 4460 from 2013. As you can see it has now been built in real life. EDIT: Aas of 1/22/16, my 8 wide Southern Pacific Daylight loco has been remade into a 6 wide model. I used the same ingenious idea for the smoke-box as Eurobricks user Electricsteam did for his Pneumatic locomotive, but with my own styling with curved parts instead of the more straight-edged cheese slopes. Here is the loco from the side, where you can see the printed parts saying "4460" & "SOUTHERN PACIFIC". Aslo while the loco stayed the same length, the tender has been shortened significantly to better fit in with the rest of my 6 - wide steam fleet. The Meramec River Runner (partially - fictional passenger train) I based these coaches off of two sources: the Wabash Frisco & Pacific Railroad (a 12 inch gauge ride-on steam line in Glencoe Missouri, near St. Louis) and the coaches formerly owned by the Museum of Transportation (also in St. Louis) before they were sold in 2012. The Southern Pacific 4460 never pulled these cars in real life, as the engine has never been restored to working order. The name of the train is based on the location of the Wabash Frisco & Pacific Railroad, which sits right next to the Meramec river on the old (1850's - 1940's) Missouri Pacific railroad track-bed. Combination baggage and passenger car, also known as a combine. Three identical passenger coaches. (sorry for the blurry photo) The observation coach of the Meramec River Runner. I want to say thanks to everyone who followed and encouraged me on this almost-three year journey from February 17, 2013 (the original posting date of the first version of the Aerottrain, and about six months before the Daylight's first version) to December 27, 2015. It's been quite a trip, and I've made plenty of progress on building my skills and tons of friends along the way.... and no, it's not over yet! Thanks to all of you! Edited July 13, 2016 by Murdoch17 Quote
Feuer Zug Posted December 28, 2015 Posted December 28, 2015 Those are two well done pieces. The Aerotrain, for the sheer fact that it's a rare type and getting the crazy lines done right must have been hard. The 'Forgotten Daylight' is cool because I'm a big steam fan and large steam engines are a beast to build. Congrats on the hard work. Quote
Murdoch17 Posted December 29, 2015 Author Posted December 29, 2015 Those are two well done pieces. The Aerotrain, for the sheer fact that it's a rare type and getting the crazy lines done right must have been hard. The 'Forgotten Daylight' is cool because I'm a big steam fan and large steam engines are a beast to build. Congrats on the hard work. Thank you! The Daylight also has some passenger coaches to pull around my layout.... I wasn't sure about adding them to the first post, because the are not based on any coaches the actual engine has pulled, (or ever will, as the engine is not restored) but do look nice behind it. I'll just add them to the first post anyway.... Quote
legonerd54321 Posted January 1, 2016 Posted January 1, 2016 (edited) Nice to see I'm not the only LEGO and train fan here on Eurobricks from the St. Louis/Missouri area! Anyways, really great MOCs. They look so simple, but yet they're still a beauty. Great job! Edited January 1, 2016 by legonerd54321 Quote
sitaipi Posted January 1, 2016 Posted January 1, 2016 (edited) agree,They look so simple, but yet they're still a beauty. Great job! Edited January 1, 2016 by sitaipi Quote
Murdoch17 Posted January 2, 2016 Author Posted January 2, 2016 Nice to see I'm not the only LEGO and train fan here on Eurobricks from the St. Louis/Missouri area! Anyways, really great MOCs. They look so simple, but yet they're still a beauty. Great job! Thanks, it was quite a fun project.... maybe someday I'll build another couple of "dream models": the EMD /GM "FT" #103 demonstrator (of which I have already designed digitally), and Milwaukee Road "Bi-Polar" #E-2. (that's the one i need a good design to make: I have no idea how to do it!) agree,They look so simple, but yet they're still a beauty. Great job! Thank you! Quote
Electricsteam Posted January 11, 2016 Posted January 11, 2016 The Aerotrain is so cute. I love trains like that! I have a soft spot for small toy-like trains.... Small train with its own tiny consist of wagons Quote
Murdoch17 Posted January 11, 2016 Author Posted January 11, 2016 The Aerotrain is so cute. I love trains like that! I have a soft spot for small toy-like trains.... Small train with its own tiny consist of wagons Thanks, I have had a soft spot for unique, one-off, or last-of-it's-kind trains my whole life. They each seem like they cover a specific portion of our history, with their own story to tell of failures or success. The Aerotrain is one of them, and while it may not have been that great at doing what it was designed to do, (get people back on the trains) it was still a point in the story of the railroads, and we should cherish them while we can.... Anyway, I'll get off my soapbox now. Thanks again for commenting! Quote
Electricsteam Posted January 11, 2016 Posted January 11, 2016 Thanks, I have had a soft spot for unique, one-off, or last-of-it's-kind trains my whole life. They each seem like they cover a specific portion of our history, with their own story to tell of failures or success. The Aerotrain is one of them, and while it may not have been that great at doing what it was designed to do, (get people back on the trains) it was still a point in the story of the railroads, and we should cherish them while we can.... Anyway, I'll get off my soapbox now. Thanks again for commenting! That's what my old "bag of ideas" topic from a few years ago was kinda suppose to do. Find old pictures of "last of it's kind" style trains and experiments. Quote
ALCO Posted January 12, 2016 Posted January 12, 2016 I love the "Forgotten Daylight"! As I am really into North American Steam, it's beautiful!! Quote
Murdoch17 Posted January 13, 2016 Author Posted January 13, 2016 (edited) I love the "Forgotten Daylight"! As I am really into North American Steam, it's beautiful!! Thanks! I am currently debating making the Daylight 6 wide so it fits in better with the rest of my steam fleet. I've already roughed out the design changes via LDD. EDIT 1/13/16: I just ordered the parts to re-make my 8 wide Southern Pacific Daylight loco into a 6 wide model. I used the same ingenious idea for the smoke-box as Eurobricks user Electricsteam did for his Pneumatic locomotive, but with my own styling with curved parts instead of the more straight-edged cheese slopes. I managed to keep most of the details and even added a crew walkway from the front of the loco to the cab. While the loco stayed the same length, the tender has been shortened significantly to better fit in with the rest of my 6 - wide steam fleet. It still is supposed to say "SOUTHERN PACIFIC" on it where the studs on the tender are. The number "4460" goes on the cab. Here is the LDD file for the updated loco: http://www.moc-pages.com/user_images/80135/1452698492m.lxf Edited January 13, 2016 by Murdoch17 Quote
Murdoch17 Posted January 22, 2016 Author Posted January 22, 2016 UPDATE: Sorry for the bump, but the first post has been updated to have my updated 6-wide 4460 model. Here is the loco with the The Meramec River Runner passenger train. Quote
Murdoch17 Posted May 26, 2016 Author Posted May 26, 2016 Main post updated with several additions made, such as this train: Enjoy! Quote
Murdoch17 Posted June 1, 2016 Author Posted June 1, 2016 I like these creations! Thank you! I just added some more trains to the first post so feel free to tell me what you think of them! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.