May 8, 20231 yr 3 hours ago, Project Black Brick said: You are quite welcome. Here is the decal version of the design. Send me photos of the figures when they are finished I'd love to see them. Probably tomorrow when I already need to print a document. Thanks again!
May 23, 20231 yr Hey man I am attatching my minecraft skin file to this post can someone plz turn it into a decal? Also, can I have kai's ninjago crystallized suit decal? Front torso and legs only Edited May 23, 20231 yr by EpicNinja423
May 23, 20231 yr Seems easy enough to design both figures. Your Minecraft skin can you send in game screen shots a front and back photo?
May 24, 20231 yr 23 hours ago, Project Black Brick said: Seems easy enough to design both figures. Your Minecraft skin can you send in game screen shots a front and back photo? Hi Project Black Brick, I am currently facing issues opening Minecraft so start with the other figure for now. I was planning to update the color scheme as well but if you want, finish making the design and then I will tell you what to make each color. Thank you again
May 25, 20231 yr Alrighty, Just post in game screen shots when you can of the minecraft figure. Let me know if I need to make any changes. To be used on white decal paper. To be used on clear decal paper with a red minifigure torso. Edited May 25, 20231 yr by Project Black Brick
May 25, 20231 yr 1 hour ago, Project Black Brick said: Alrighty, Just post in game screen shots when you can of the minecraft figure. Let me know if I need to make any changes. Hey Project Black Brick, good job. Now for color scheme changes, change all red to black, and all dark red, tan, and silver to red. Good luck Edited May 25, 20231 yr by EpicNinja423
May 25, 20231 yr 24 minutes ago, Project Black Brick said: That's easy enough. Uhh... I meant change the dark red, tan, and silver ALL into red. Not dark red to tan. Also the tan-ish scarf and belt need to be red Edited May 25, 20231 yr by EpicNinja423
May 25, 20231 yr Are you trying to say turn the dark red sections into dark tan? Trying to figure out what you mean by turning all silver to red because I thought I accomplished that. Sure I can change the scarf and belt from gold to red. Bright red or dark red?
May 25, 20231 yr 5 hours ago, Project Black Brick said: Are you trying to say turn the dark red sections into dark tan? Trying to figure out what you mean by turning all silver to red because I thought I accomplished that. Sure I can change the scarf and belt from gold to red. Bright red or dark red? I think best to give an easier description of what I want. I wanted the base to be black and all the decorations red (bright red). Curious to know what I am making? the answer is MYSELF Do you have a rebrickable account? Can you tell me your email plz? Edited May 25, 20231 yr by EpicNinja423
July 22, 20231 yr Not quite sure how to ask, so here we go: Way back, LEGO did a few custom Brickheadz for Store Openings. Mostly in China, but two in Europe, as well. They were Shimao, Beijing, Hangzhou, Amsterdam, Cologne. They also did one called "Nonnie" for the LEGO Inside Tour 2017. Anyone willing to give these a try? The five Store Openings ones were printed onto a 1x2x2 brick, while the Nonnie one was printed on a 2x4 brick. Some photos to follow, and thanks in advance! Shimao: Beijing: Hangzhou: Amsterdam: Cologne: Nonnie:
July 30, 20231 yr Hello I am looking for decals of 1x2 tiles for a Lego 10:1 project. Especially the ones from the 80' and 90'. I am currently trying to trace the following ones. But unfortunately I realise that I am completely untalented. Does anyone have the following decals, if as Vecotr graphics it would be great? https://www.bricklink.com/v2/catalog/catalogitem.page?P=3069bpx29#T=P https://www.brickowl.com/catalog/lego-tile-1-x-2-with-wanted-poster-with-groove-3069 https://www.bricklink.com/v2/catalog/catalogitem.page?P=3069bpb0008&name=Tile 1 x 2 with Groove with Swiss Red Cross Pattern&category=[Tile, Decorated]#T=P&C=1 https://www.bricklink.com/v2/catalog/catalogitem.page?P=3069bp52&name=Tile 1 x 2 with Groove with Gauges, Buttons and '85' Pattern&category=[Tile, Decorated]#T=P https://www.bricklink.com/v2/catalog/catalogitem.page?P=3069bpx7&name=Tile 1 x 2 with Groove with White 100 Paper Bill Money Pattern&category=[Tile, Decorated]#T=P https://www.bricklink.com/v2/catalog/catalogitem.page?P=3069bpb0132&name=Tile 1 x 2 with Groove with HP Sock Pattern&category=[Tile, Decorated]#T=P I would cut out the decals with the cutting plotter and then spray them with the airbrush. Thanks for the help twisters Edited July 30, 20231 yr by twisters
August 3, 20231 yr On 7/30/2023 at 1:51 PM, twisters said: Hello I am looking for decals of 1x2 tiles for a Lego 10:1 project. Especially the ones from the 80' and 90'. I am currently trying to trace the following ones. But unfortunately I realise that I am completely untalented. Does anyone have the following decals, if as Vecotr graphics it would be great? https://www.bricklink.com/v2/catalog/catalogitem.page?P=3069bpx29#T=P https://www.brickowl.com/catalog/lego-tile-1-x-2-with-wanted-poster-with-groove-3069 https://www.bricklink.com/v2/catalog/catalogitem.page?P=3069bpb0008&name=Tile 1 x 2 with Groove with Swiss Red Cross Pattern&category=[Tile, Decorated]#T=P&C=1 https://www.bricklink.com/v2/catalog/catalogitem.page?P=3069bp52&name=Tile 1 x 2 with Groove with Gauges, Buttons and '85' Pattern&category=[Tile, Decorated]#T=P https://www.bricklink.com/v2/catalog/catalogitem.page?P=3069bpx7&name=Tile 1 x 2 with Groove with White 100 Paper Bill Money Pattern&category=[Tile, Decorated]#T=P https://www.bricklink.com/v2/catalog/catalogitem.page?P=3069bpb0132&name=Tile 1 x 2 with Groove with HP Sock Pattern&category=[Tile, Decorated]#T=P I would cut out the decals with the cutting plotter and then spray them with the airbrush. Thanks for the help twisters Hello Twisters, Let me see what I can do about designing these tiles for you. I should have something to show you in the next couple days. EDIT: I was able to quickly design these three 1x2 decals Edited August 5, 20231 yr by Project Black Brick
August 5, 20231 yr On 8/3/2023 at 11:55 AM, Project Black Brick said: I was able to quickly design these three 1x2 decals Hello Thank you, I tried 2 right away. Looks very good. Regards
September 23, 20231 yr Hi, I am looking for a POTC torso decal : the magnificent torso of King George´s officer. Does anyone have it by chance ?
September 23, 20231 yr On 9/23/2023 at 11:18 AM, julien83 said: Hi, I am looking for a POTC torso decal : the magnificent torso of King George´s officer. Does anyone have it by chance ? I enjoyed designing this decal since it was pretty straight forward. Let me know your thoughts and if there is anything I could improve? Edited September 24, 20231 yr by LuxorV Please do not quote images from the same page, and especially the post above yours. Thank you
September 23, 20231 yr On 9/23/2023 at 1:17 PM, Project Black Brick said: I enjoyed designing this decal since it was pretty straight forward. Let me know your thoughts and if there is anything I could improve? Thank you so much It’s a great job ! Sorry in advance for my bad english (I use Google translate). I would like to have if possible an image that allows me to change the color of the breastplate. I would like to create different redcoats, bluecoats, greencoats, whitecoats… by varying the colors, especially that of the breastplate. For example, for bluecoats, a red breastplate would be magnificent. Edited September 24, 20231 yr by LuxorV Please do not quote images from the same page, and especially the post above yours. Thank you
September 23, 20231 yr I’m happy you like the design. Sure I can send you a google doc link for the file is there any particular preference on file type? I personally use SVG files and a program called Inkscape for all my designs best part is it’s a free program.
September 30, 20231 yr From your design, I made some color changes. I used Gimp. I am a noob, but it worked. Here is the result : https://www.cjoint.com/c/MIEkO6Jv4BF I am so happy. Thank you very much @Project Black Brick
November 14, 20231 yr On 9/23/2023 at 3:18 PM, Project Black Brick said: I’m happy you like the design. Sure I can send you a google doc link for the file is there any particular preference on file type? I personally use SVG files and a program called Inkscape for all my designs best part is it’s a free program. I'd love to see the SVG file. Have just downloaded Inkscape and started playing around to learn. I'd also like to see or try and change the background of the decal so it can be printed on clear paper and applied to any colour torso. If you would be able to create another 1x2 decal I'd love to see the blanket as a decal. Or if anybody else feels like making it into a decal. Is there any good way to make decals from Lego designs? Or do one have to start from the beginning and draw and try to copy the design?
November 28, 20231 yr Hey I have a request for some decals for Pirates of the Caribbean: - Pintel and Ragetti face decals (they can have grinning or worried expressions) - Davy jones’ chest decals (like the ones from the game) - jack sparrow torso, face, and legs from the silent mary set (the really detailed one) - captain Teague torso, legs and face - Tia Dalma face - jack’s compass - Davy jones’ crew member faces (from crew members we don’t have yet) if anyone has these or is willing to make them, please let me know
December 26, 20231 yr Hi, I’m new here and I’m hoping that I can get some help. I’m looking to get real world head, torso and legs for the dreamzzz characters (Mateo, Logan, and Izzy) (I can provide pictures if needed/desired). I mean decals so I can print them out. I can get the parts and all that but the decals don’t exist :( **Edit: this request can be disregarded I’ve started learning how to make decals myself and have been really enjoying the work. Here’s an example of what I’ve made so far. Edited January 5, 20241 yr by DreamsOfReality
January 4, 20241 yr Hey I want a decal for parts: https://www.bricklink.com/v2/catalog/catalogitem.page?P=22385pb048&idColor=17 https://www.bricklink.com/v2/catalog/catalogitem.page?P=970c11pb28&idColor=59 https://www.bricklink.com/v2/catalog/catalogitem.page?P=973pb2439&idColor=59#T=C&C=59 https://www.bricklink.com/v2/catalog/catalogitem.page?P=3626cpb1640&idColor= If someone could do this, I would be grateful. Thanks.
February 25, 20241 yr Hi, does anyone mind making a confederate torso decal that is in a light tan color? Or something that looks like a confederate butternut torso. My search for butternut torsos has been hard. So if anyone minds making me one I would much appreciate it! Thanks, Lawdawg
August 6, 2024Aug 6 Hello I haven't been here for a while, but can someone make the following torsos as decals? The lime one recolor all lime to standard lego green, and the white one recolor the blue bits to bright pink Thanks in advance! :)
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.