Decal Wish List

[Praiter Yed]

I you!

This one is just as good, and it was very fast too!

Calm down dear. You're welcome - I look forward to seeing one of them.

Hello all,

I just would like to request a face and torso decal for Darth Nihilus, if at all possible. Reference:

http://starwars.wikia.com/wiki/File:DNs.jpg

I've never heard of Darth Nihilus, darthnihilius. Is this OK?

I'll have a look at the torso asap - just had a bit of spare time today.

Edited November 15, 2011 by Praiter Yed

[Darth Nihilus]

I've never heard of Darth Nihilus, darthnihilius. Is this OK?

I'll have a look at the torso asap - just had a bit of spare time today.

That is exactly what I wanted for the face. Thank you so much! Now all I need is to find a black head to put it on! Thank you so much, I always have wanted a minifig of my favorite Sith.

[Praiter Yed]

That is exactly what I wanted for the face. Thank you so much! Now all I need is to find a black head to put it on! Thank you so much, I always have wanted a minifig of my favorite Sith.

Thanks darthnihilius I'm happy you like it . I've updated my post above to include the torso.

Edited November 15, 2011 by Praiter Yed

[TheBoyWonder]

Can someone do a Baby Doll Decal please? Can it be based of the Penguins one? Sorry for no reference picture.

[nik1002]

hi i'm new here and i'm planning to make a lego malfoy manor.Please, pretty please could someone make

face and torso/dress decals for the following

The Malfoys in the pic attatched, except for Bellatrix Lestrange

Thanks

Nik1002

Hi, I asked for this a long time ago but had no response. Please could you make me a decal for the three Malfoys.

Many Thanks,

Nik

[Cutler Beckett]

Please do me face decal (skin-light flesh)

Please ! urgently !

Edited November 22, 2011 by Cutler Beckett

[K-Nut]

Not really a decal request, but does anybody know the measurements for a minifig face in the American way of measurement? I can only find it for the torso.

[FettJango]

Hi.

I was wondering if someone can help me with decals. As an avid South Park fan, I decided to try to make a small MOC with figures.

So if I could have help with the following figures:

Cartman:

Kyle:

Stan:

Kenny:

Also, if you have extra time, Craig, Clyde or Butters would be appreciated.

[Cutler Beckett]

Please do me face decal (skin-light flesh)

Please ! urgently !

Edited November 18, 2011 by Cutler Beckett

[Darth Nihilus]

Can someone please make me a decal of this:

Face(in Light Flesh), torso, legs, and arms, please.

Thank you in advance.

Edited November 18, 2011 by Darth Nihilus

[Cutler Beckett]

Please quickly !Help me urgently need this decal is a very important thing for me :cry_sad: !I myself can not do it, I do not know how

Edited November 18, 2011 by Cutler Beckett

[Darth Nihilus]

Please quickly !Help me urgently need this decal is a very important thing for me :cry_sad: !I myself can not do it, I do not know how

Why can't you just buy the PoP $30 Battle for the Dagger? That would get you a face that fits your criteria, and also give some good parts and faces for MOCs of Red Alert.

[Cutler Beckett]

This face dont like

[LuxorV]

This face dont like

Please post with appropriate grammar, spelling and punctuation.

[Cutler Beckett]

:cry_sad: :cry_sad: :cry_sad:

Please help me :cry_sad:

Help me urgently need this decal is a very,very,very important thing for me :cry_sad: :cry_sad

Edited November 19, 2011 by Cutler Beckett

[SoupOrFishOil]

Hi! I'm working on a minifigure, and have a request. I would like a Catwoman face based on either the original or upcoming minifigure, please. I know that it would probably be difficult, but I'd like the side with the visor, and hopefully so that it will fit as best as possible as "eyes" behind her mask. Thanks!

Again, either one is fine, even though they are pretty much the same. Thank you!

[LuxorV]

* snip *

This is the last warning: stop posting your request and saying it is urgent. The only thing You will acheive is annoying our customisers.

[Praiter Yed]

Hi.

I was wondering if someone can help me with decals. As an avid South Park fan, I decided to try to make a small MOC with figures.

So if I could have help with the following figures:

Also, if you have extra time, Craig, Clyde or Butters would be appreciated.

I also enjoy South Park and would be happy to do these (in fact I did some purist-ish versions a while ago) . But could you give me a bit more info?

Do you want the faces to look closer to the South Park style rather than Lego style ie big white eyes?

What about Kenny's hood - should that be part of the face decal or do you already have some headgear in mind?

Hi! I'm working on a minifigure, and have a request. I would like a Catwoman face based on either the original or upcoming minifigure, please. I know that it would probably be difficult, but I'd like the side with the visor, and hopefully so that it will fit as best as possible as "eyes" behind her mask. Thanks!

'snip'

Again, either one is fine, even though they are pretty much the same. Thank you!

Is this what you had in mind Superficial Username? I can't guarantee the 'eye' position will be correct as I don't have a Catwoman mask to check against - but I can tweak it if it doesn't work for you.

[SoupOrFishOil]

Is this what you had in mind Superficial Username? I can't guarantee the 'eye' position will be correct as I don't have a Catwoman mask to check against - but I can tweak it if it doesn't work for you.

That's great

Actually, I could probably tweak it myself, I can do simple decals. Thanks

[FettJango]

Do you want the faces to look closer to the South Park style rather than Lego style ie big white eyes?

What about Kenny's hood - should that be part of the face decal or do you already have some headgear in mind?

Hi, and thanks so much. Actually I was wondering if you could make face and torso decals. If could make make the face decals South Park style, that would be even better. As for Kenny, I already have something in mind, so if you could please make just the face. Same with Kyle, too, please. I also have a headpiece for him. Thanks so much. Greatly appreciated.

[Lego Man Can]

Not much to ask, but could someone please get me the Train sign (the one with the circle with the arrows coming out of it)? Thanks

[Praiter Yed]

That's great

Actually, I could probably tweak it myself, I can do simple decals. Thanks

Cool, but if you have any problems let me know.

Hi, and thanks so much. Actually I was wondering if you could make face and torso decals. If could make make the face decals South Park style, that would be even better. As for Kenny, I already have something in mind, so if you could please make just the face. Same with Kyle, too, please. I also have a headpiece for him. Thanks so much. Greatly appreciated.

OK, I'll try to get these done this week.

Edited November 20, 2011 by Praiter Yed

[Darth Nihilus]

Can someone please make me a decal of this:

Face(in Light Flesh), torso, legs, and arms, please.

Thank you in advance.

Okay, I requested this on the last page, but it was lost uder Cutler Beckett's requests, so I'm just going to ask again. Can someone please make me this decal, the way I asked for it in the quote? I just got some waterslide paper, and I want to test it out, but one decal (the one Praiter Yed made for me) isn't enough to fill a whole sheet, and I hate wasting it when it's $1 per sheet. So, can someone please make me this decal? Thank you in advance.

[jth781]

I just came across this and was wondering if someone could due a FBI torso with the classic blue jacket look with the yellow lettering. Also much appreciated if you could try to do a FBI badge for a 1X1 tile.

I just came across this and was wondering if someone could due a FBI torso with the classic blue jacket look with the yellow lettering. Also much appreciated if you could try to do a FBI badge for a 1X1 tile.

I forgot to say Thank You so much for who ever can help me with this I really apprecate it.

[Darth Nihilus]

Hello, If anyone would like to make me decals for these clone troopers:1.

*snip*

I whould be greatfull.

If anyone makes them for me could they please make them a suitble size so they do not pixilize if I try to print them and if they could get back to me to.

Thanks.

I can make 3 out of 4 of those, the camo one is too complicated for me to do accurately. Would this be acceptable?