Posted October 6, 20168 yr 42056 - PORSCHE GT3 RS - CUSTOM STICKERSIMPORTANT UPDATE ON ORDERINGTime has gotten in the way of the Lego hobby. Unfortunately I am not able to sell these stickers anymore. However, my Lego Friend Marco will be taking over sales of these sets, same design / same quality. If you are interested, please email him: mvds_1973@hotmail.com Or you can contact him through his Bricklinkshop: https://store.bricklink.com/MVDS?p=MVDS#/terms https://store.bricklink.com/DVDS?p=DVDS#/terms Lastly I wish to sincerely thank everybody who already bought the set(s) and made it a huge success, thank you! Walter Spierenburg INTRODUCTION How cool would it be to have some nice decals for your 42056 Porsche GT3 RS like the ones below?! Well, recently saw a guy on Facebook posting pictures of his 42056 with such decals! I contacted him to ask if he was selling, and he was. So I bought two sets of these stickers, which he promptly sent. Tonight I applied the stickers and the result is shown below.STICKERS The set comes with stickers for the two sides, and one for the number plate. Make sure to use the right stickers for the right side. This seems obvious, but you can easily make an error. Each side has four stickers, which means that the bigger one is a STAMP (sticker across multiple pieces/parts). This is frowned upon, but it can be easily fixed. Use a small hobby knife to cut the sticker after you have applied it. This will yield the perfect result. The quality of the stickers is good. Looking at them closely, you will see a little graininess, but after you have applied the stickers it's hardly noticeable. All in all they make a great addition to the Porsche! Especially when you put in on display. I had a talk with they guy and he happened to have a Eurobricks account. His name is 8421XXL and he will probably here to answer your questions. If you are interested in these stickers, please use the PM instead of posting it here. Thanks. Edit: added the following section for V2. STICKERS V2 After the highly successful sticker set Walter created for the Porsche, he has released a second version. One of the reasons for releasing this second set, is the inclusion of a spoiler sticker. As you can see there was no sticker in the first version. This got solved by providing a nice sticker for the spoiler. This sticker can obviously be combined with the first version of the sticker sheet. Below is a picture of the Porsche with first version sticker sheet combined with the spoiler sticker. The spoiler sticker is the icing on the cake. Here's the Porsche with the new sticker sheet applied. This new version also makes the Porsche look way better than without sticker sheet. When I see a version without a sticker sheet nowadays, I really find it's missing something. It just needs a pair of Walter's stickers. Whether it's version 1 or 2, I will leave that up for you to decide. I will revert back to version 1 with the spoiler sticker. I just love that look. Here's the new design in more detail. Very nice and clean design! And a full shot of the new design. You can get these new stickers by contacting Walter (@8421XXL) directly or by visiting the MVDS Bricklink Store, a friend of Walter's.
October 6, 20168 yr Looks interresting.. BTW: you've got the front arched panels put on the other way around. Â
October 6, 20168 yr Author 1 minute ago, JunkstyleGio said: Looks interresting.. BTW: you've got the front arched panels put on the other way around. Â Sharp eye I detached them and put them back on....apparently without looking carefully. I didn't even notice when taking the pictures
October 6, 20168 yr That looks awesome! Panel should be flush with lift arm in the back (in front of tire) as well.
October 6, 20168 yr Thanks for bringing these to our attention Jim. They're awesome and make the car look 'complete'. I think I'll have to buy me a set.
October 6, 20168 yr Its like you don't know what your missing until you see it, then wham!!! Â Thanks Jim! Â Makes you wonder why TLG didn't provide them in the first place. Edited October 6, 20168 yr by JGW3000
October 6, 20168 yr wow.... These are great. Mine are ordered and will now go on my ultimate "displayable" version. Perhaps I will have to take new pics.
October 7, 20168 yr How are you guys ordering them? I pm'd the user Jim mentioned but no response. Â
October 7, 20168 yr Author 1 hour ago, technic_addict said: How are you guys ordering them? I pm'd the user Jim mentioned but no response.  Be patient and give the guy (Walter) some to sleep will you Or he was very busy making stickers
October 7, 20168 yr 7 hours ago, technic_addict said: How are you guys ordering them? I pm'd the user Jim mentioned but no response.  PM send to you (did not receive yours for some reason). 11 hours ago, nerdsforprez said: wow.... These are great. Mine are ordered and will now go on my ultimate "displayable" version. Perhaps I will have to take new pics. PM send to you (did not receive yours for some reason).
October 7, 20168 yr Sticker look great! Interesting fact is that AFOLs blame LEGO for designing stickers that need to be applied over multiple parts (STOMP), but then again fine doing so on their own.Â
October 7, 20168 yr Author Just now, zux said: Interesting fact is that AFOLs blame LEGO for designing stickers that need to be applied over multiple parts (STOMP), but then again fine doing so on their own. You mean STAMP, and I have already addressed it in my "review".
October 7, 20168 yr 5 minutes ago, zux said: Sticker look great! Interesting fact is that AFOLs blame LEGO for designing stickers that need to be applied over multiple parts (STOMP), but then again fine doing so on their own. zux, for your information, the Designer and I made this deliberate. Trying to fit this sticker as 2 seperate stickers makes it much harder to apply them striaght. it is a challange as it is to apply them neatly. Also we did not like the "look" of the sticker in 2 parts (also the real life sticker is one piece). So this sticker being so called STAMP is a well thought over decision. As Jim mentioned, if you do not want it to be STAMP, simply cut it after applying to the door, "problem" solved ;-)!
October 7, 20168 yr 9 hours ago, technic_addict said: How are you guys ordering them? I pm'd the user Jim mentioned but no response. Jim included a decent promo here: 17 hours ago, Jim said: 1 hour ago, 8421XXL said: PM send to you (did not receive yours for some reason).  What country is the licence plate from? I don´t use facebook and don´t like to do this half secret PM stuff if the moderator advertises you in the open. How much will the stickers cost?
October 7, 20168 yr Author 4 minutes ago, brunojj1 said:  I don´t use facebook and don´t like to do this half secret PM stuff if the moderator advertises you in the open. I recommended sending a PM since this is not the Buying & Selling forum. No super secret stuff going on and you don't need Facebook.
October 7, 20168 yr Author 1 minute ago, brunojj1 said: Oops, I´m sorry! Thanks anyway! No worries. I'm sure 8421XXL will answer your other questions.
October 7, 20168 yr 40 minutes ago, brunojj1 said: Jim included a decent promo here:  What country is the licence plate from? I don´t use facebook and don´t like to do this half secret PM stuff if the moderator advertises you in the open. How much will the stickers cost? You have a PM from me brunojj1
October 7, 20168 yr 3 hours ago, 8421XXL said: PM send to you (did not receive yours for some reason). PM send to you (did not receive yours for some reason). Maybe there is an issue with the PM system or my settings? I have not received anything from you.
October 8, 20168 yr 18 hours ago, technic_addict said: Maybe there is an issue with the PM system or my settings? I have not received anything from you. technic_addict pls email to nestboxlive@yahoo.com
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.