May 2, 20195 yr @XG BC it is your build, just some ideas from me :) As @mrfuture correctly said, "it is beauty of Lego", we built on together to make something new and astonishing. I had to put motor one plate higher, and it is pretty usable on straight line, but either i failed with built, or it doesn't like any curves very much Also placing motor higher than gear with smaller gear gives better speed characteristics
May 2, 20195 yr Using a 16T spur gear meshing with 12T single bevel gear is not good the teeth don,t match.
May 2, 20195 yr Another tip to the Hidaka design. Make sure all sidepins rolls well, inclusive the drive wheels /roll wheels (if any). Edit: Any designs with same type of sider roll pins. I may failed on the free roll wheels on my train at the event. I check tomorrow if losing up the free rolling wheels helped my problem. Edit 2: Checked the train and it looks like the problem i had was still there but looks like it is better than with some friction on the free roll wheels. The transjering cogwheel between motor and the actual wheel started to move sideways, melting so the cogwheel could not interlock with the other anymore. Edited May 3, 20195 yr by mrfuture
May 3, 20195 yr @tkf can you place the buwizz lower on the follower car? this might help with reducing the wobble and make driving through the curves easier. And the speed problem is that i currently dont own a pf m motor just an education e motor wich has higher rpm so my gearing has to be differently. also have you checked that your side guiders arent spread out a bit so it shouldnt tip over so hard. XG BC Edited May 3, 20195 yr by XG BC
May 6, 20195 yr I wonder if my design will help anyone who's trying to build 4 wide? Because of the gearing it does run a little slow, but I solved that by running it on three 3.7v 10440 lipos instead of six 1.5v AAA batteries. Now it speeds right along.
May 15, 20195 yr For the next exibithion i've built a "little" Monorail Station for Snottingen Monorailways: Find more pictures on Flickr. I'm very excite for the exhibition on June 22th and 23th in Rüsselsheim, Germany, when all my builds from the last 8 month comes together. Over all it will be a 20x8 Basplates Layout (5,12m x 2,05m) Cheers Filius Rucilo Edited May 27, 20195 yr by FiliusRucilo
May 16, 20195 yr Wow, that is fantastic! I hope the show goes well. Keep us updated with some pics. I think the small clocktower is my favorite single design element. Is that original? How'd you make that gold border? Is Snottengen a real word or location somewhere?
May 16, 20195 yr Hi Sed, For the clock post i've made a instruction. You can find it here. The golden borders are from a LEGO-Dice. Snottingen ist my modular town and not a real place. The Name comes from to SNOT (Stud not on top) an definitely not from snot. ;-) Cheers Filius Rucilo Edited May 27, 20195 yr by FiliusRucilo Add Link
May 16, 20195 yr Impressive train monorail station! So many nice details on that crowdy place. I always wanted to do domething similar for my trains. The roof technique is brilliant - I might copy that... Thanks for the link to the clock tower!
May 27, 20195 yr I did a one day expo today, so I went with less stuff than last time. I builded a station for the monorail to stop and take passenger using the PoweredUp (Batmobile) and WeDo 2.0. The monorail did over 600 stops, I had to change batteries once and they died 15 min before closing. Pretty proud of that little ride! Scratch GUI : https://bricklife.github.io/scratch-gui/Batmobile Powered Up: https://shop.lego.com/…/La-Batmobile-telecommandee-par-appl… WeDo 2.0: https://education.lego.com/en-us/shop/wedo-2
May 27, 20195 yr 2 hours ago, MonsieurCaron said: I builded a station for the monorail to stop and take passenger using the PoweredUp (Batmobile) and WeDo 2.0. The monorail did over 600 stops, I had to change batteries once and they died 15 min before closing. Awesome, and transparent rails add a great touch to it. How long it was going on one charge? On 5/15/2019 at 6:41 PM, FiliusRucilo said: For the next exibithion i've built a "litte" Monorail Station for Snottingen Monorailways: You monorail station is beautiful, nice piece of classic european architecture. Look forward for photographs from exhibition. @Doug72 thanks, were checking idea just with the parts i had nearby. @XG BC :) i was too far from my pieces for almost month, and hadn't returned yet. But i'm full of ideas, so will continue experiments after my return. 4 wide seems interesting, but it has problems with decorating everything, although it is hard but not impossible. Most likely i will concentrate my efforts firstly on 6 wide, with hopes to finish it before ongoing festival, but most likely my monorail will skip it :(
May 27, 20195 yr 10 hours ago, tkf said: Awesome, and transparent rails add a great touch to it. How long it was going on one charge? Around 3h non stop with 6x AAA.
May 29, 20195 yr Author 8 hours ago, Masao Hidaka said: I respected "6990 Monorail Transport System" and made this monorail. :) So cool! Love how clean it is on the exterior, while the interior has all these cool little details. The little hover bike is awesome!
June 2, 20195 yr I wrote an update in my own thread about the Mindstorms EV3 Monorail. You can read in my update everything about the new train design, the new container wagon and the up/down slope track. Edited June 2, 20195 yr by Hanso
June 12, 20195 yr Wow - fantastic bunch of different engines you have accumulated! Thanks for sharing the video!
June 15, 20195 yr On 6/15/2019 at 3:18 PM, sed6 said: Feast your eyes on this! i can only say one thing: NICEEEEE!!! Also you might have a look at this thread: XG BC Edited June 18, 20195 yr by XG BC
June 25, 20195 yr I was out for display on RHEIN-MAIN-STEIN last weekend. My Monorail is now embedded into my city Snottingen.
June 25, 20195 yr On 5/16/2019 at 1:52 AM, FiliusRucilo said: Hi Sed, For the clock post i've made a instruction. You can find it here. The golden borders are from a LEGO-Dice. Snottingen ist my modular town and not a real place. The Name comes from to SNOT (Stud not on top) an definitely not from snot. ;-) Cheers Filius Rucilo Somehow I missed this post ... Your clock is impressive ... I may borrow your design as well! Thank you for sharing!
June 26, 20195 yr 19 hours ago, FiliusRucilo said: I was out for display on RHEIN-MAIN-STEIN last weekend. My Monorail is now embedded into my city Snottingen. Great Work!!! :D
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.