BrickbyBrickTechnic Posted August 15, 2017 Posted August 15, 2017 (edited) Anyone remember this B model? I personally think it sucks. So I decided to rebuild it, but as a C model of set 42054. These are the functions the finished model will have: -Crane stage 1 (motorized) -Crane stage 2 (motorized) -Front ripper blade (motorized) -Grabber (manual) -Articulated steering (manual) -Simulated suspension Here's what I have so far: This is the rear with the basis for the crane. This is the 2 axis articulated joint. This gives a simulated suspension. So that's it for now! Stay tuned for updates, as they will be coming soon! BrickbyBrickTechnic Edited August 18, 2017 by BrickbyBrickTechnic Quote
1gor Posted August 15, 2017 Posted August 15, 2017 It could be great C model, you have almost 2000 parts and what is most important 4 Tires that worj also for forestry equipment and not only for agricultural equipment. I'll keep my fingers crossed (from time to time, otherwise I would do enything) ...and as I mentioned on other topic Unimog is under reconstruction Quote
Kmuffin Posted August 15, 2017 Posted August 15, 2017 Looking foward to it. All of your c models are exellent and I hope this will always be like that Quote
BrickbyBrickTechnic Posted August 15, 2017 Author Posted August 15, 2017 1 hour ago, Kmuffin said: Looking foward to it. All of your c models are exellent and I hope this will always be like that Thank you! I'm glad you think my C models are great, because the idea of C models got me into lego in the first place. Quote
M_longer Posted August 15, 2017 Posted August 15, 2017 Interesting idea, it was one of my first thoughts about C model for that set. Looking forward for the finished model. Why you have decided to use small turntable in the middle of the frame, instead of using pendular axle on the front? Problem with making a skidder even on 107mm wheels is that they are still too small for a bigger model :) Real machine uses really big tires, so even with Xerion tires this model will be relativelly small. Quote
BrickbyBrickTechnic Posted August 15, 2017 Author Posted August 15, 2017 Just now, M_longer said: Why you have decided to use small turntable in the middle of the frame, instead of using pendular axle on the front? There isn't enough space to insert a pendular axle. You'll see in the next update, tomorrow. 8 minutes ago, M_longer said: Real machine uses really big tires, so even with Xerion tires this model will be relativelly small. Correct. The model so far isn't very big. Again, you'll see tomorrow. Quote
BrickbyBrickTechnic Posted August 16, 2017 Author Posted August 16, 2017 7 hours ago, AFOLegofan66 said: okay I'm interested...bring it on!! Great! Update time! So today I got around to starting the front section. I added the second multidirectional gearbox, which will control the front blade. As well, I added the wheel mountings. @M_longer Here's why a front pendular axle isn't possible (above picture). The M motor has yet to be added. Sorry for the picture quality. So That's it for now. New updates should be coming out tomorrow. Have a great day! BrickbyBrickTechnic Quote
ThatOneBuilder Posted August 16, 2017 Posted August 16, 2017 I think the chassis is coming along really nicely And those tires fit this theme so well! Quote
BrickbyBrickTechnic Posted August 16, 2017 Author Posted August 16, 2017 1 hour ago, ThatOneBuilder said: I think the chassis is coming along really nicely And those tires fit this theme so well! Thank you! The tires inspired this one Quote
ThatOneBuilder Posted August 16, 2017 Posted August 16, 2017 2 hours ago, BrickbyBrickTechnic said: Thank you! The tires inspired this one Yep, tires are the most important thing in a build.They decide the scale and the looks.Something I have yet to learn Quote
M_longer Posted August 16, 2017 Posted August 16, 2017 5 hours ago, BrickbyBrickTechnic said: Here's why a front pendular axle isn't possible (above picture). It is possible, You have only one Technic axle going to front. You could rebuild the front axle with using small turntable to incorporate it as pivot point. Give it a try. Quote
BrickbyBrickTechnic Posted August 16, 2017 Author Posted August 16, 2017 Just now, M_longer said: It is possible, You have only one Technic axle going to front. You could rebuild the front axle with using small turntable to incorporate it as pivot point. Give it a try. I'll see what I can do. Quote
BrickbyBrickTechnic Posted August 17, 2017 Author Posted August 17, 2017 UPDATE TIME! @M_longer , I added the pendular axle. It required a full rebuild of the front end and part of the rear (to take out the turntable). The ripper function was also rebuilt and the blade was added. Rebuild of the front (below): M motor added: Seat added: Everything so far: The crane also got beefed up. The big thing I have to worry about is BB placement. So That's all! Have a great day! BrickbyBrickTechnic Quote
ThatOneBuilder Posted August 17, 2017 Posted August 17, 2017 Wouldn't this be a D-model? Nice progress, crane is looking nice.Btw did the original come with suspension of any kind? Quote
BrickbyBrickTechnic Posted August 17, 2017 Author Posted August 17, 2017 7 minutes ago, ThatOneBuilder said: Wouldn't this be a D-model? Nice progress, crane is looking nice.Btw did the original come with suspension of any kind? The original did not come with suspension, just an excess of turntables ;) This is a d model! I should change that. Quote
ThatOneBuilder Posted August 17, 2017 Posted August 17, 2017 1 hour ago, BrickbyBrickTechnic said: The original did not come with suspension, just an excess of turntables ;) How many to be exact? Maybe you could make a forklift like thing or a crawler later :D Quote
Aventador2004 Posted August 17, 2017 Posted August 17, 2017 Just now, ThatOneBuilder said: How many to be exact? Maybe you could make a forklift like thing or a crawler later :D 2 turntables came with the set. Quote
BrickbyBrickTechnic Posted August 17, 2017 Author Posted August 17, 2017 4 minutes ago, Aventador2004 said: 2 turntables came with the set. 3 turntables: 2 big, 1 small @ThatOneBuilder Quote
ThatOneBuilder Posted August 17, 2017 Posted August 17, 2017 Just now, BrickbyBrickTechnic said: 3 turntables: 2 big, 1 small @ThatOneBuilder You could make a really interesting vehicle with the two large turntables... something like a rock crawler maybe with pendular suspension and really, really unfitting tires Quote
BrickbyBrickTechnic Posted August 17, 2017 Author Posted August 17, 2017 3 minutes ago, ThatOneBuilder said: You could make a really interesting vehicle with the two large turntables... something like a rock crawler maybe with pendular suspension and really, really unfitting tires @Offroadcreat1ons already did! There are instructions for it; check rebrickable Quote
ThatOneBuilder Posted August 17, 2017 Posted August 17, 2017 Just now, BrickbyBrickTechnic said: @Offroadcreat1ons already did! There are instructions for it; check rebrickable I guess im stupid, because its the first thing that popped up when i typed 42054 crawler.... Its really well made! Also, your crop sprayer is on the front page of rebrickable!And man does it look great! Quote
BrickbyBrickTechnic Posted August 17, 2017 Author Posted August 17, 2017 12 minutes ago, ThatOneBuilder said: Also, your crop sprayer is on the front page of rebrickable!And man does it look great! Thank you! Quote
M_longer Posted August 17, 2017 Posted August 17, 2017 3 hours ago, BrickbyBrickTechnic said: I added the pendular axle. It required a full rebuild of the front end and part of the rear (to take out the turntable) "Impossible is nothing". But I think that chassis should be shortened: Quote
ThatOneBuilder Posted August 17, 2017 Posted August 17, 2017 8 minutes ago, M_longer said: "Impossible is nothing". But I think that chassis should be shortened: Yes, definitely seems like it.But i cant see how it will be easy to do so... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.