Posted September 9, 20177 yr This Ford GT is the ultimate expression of form following function. Its teardrop- shape body is the result of extensive work in the wind tunnel. Its carbon-fibre body and its 600-plus horsepower 3.5L EcoBoost V6 engine are the ultimate expressions of technological innovation. Flickr: https://flic.kr/s/aHsm7qSxrk Hello Ford and Technic addicts! Thorsten has completed professional instructions for the Ford GT. It might be time to disassemble your 42056 Porsche Kit and build this orange replica of the 2017 Ford GT! Avail at Rebrickable, check it out!  Rebrickable: https://rebrickable.com/mocs/MOC-10792/Loxlego/ford-gt  Flickr: https://www.flickr.com/gp/139930963@N04/83f95A Video: https://youtu.be/bV8_uOz50oU Ford GT - race car for the road ? by lachlan cameron, on Flickr This supercar packs RWD driven by 2 XL-Motors, Servo for steering, pushrod-actuated torsion bar style suspension front and rear, Sport and track mode suspension, V6 engine, Sbrick plus, Rear spoiler with manual lift, 2 M-motors (1 for each door), button to turn on the car under the hood, easy battery access. Ford GT - From drawing board to reality ? by lachlan cameron, on Flickr Nothing about this build was easy. This car had so many new things that I've have never accomplished before. To start was the framework. I was worried this build would be too heavy for the pushrod suspension. Each wheel has 2 inboard shocks that are positioned in the same fashion as the real Ford GT. Ford GT - door mechanics - filter shot by lachlan cameron, on Flickr I really wanted to have the doors open the same as the real car and this is where difficulty started. Opening those huge, heavy doors was a small feat in itself. The pressure required to pop the door to the final position upwards is immense, so I has to seriously gear down the axle. Ford GT - doors by lachlan cameron, on Flickr The next challenge was the motor placement. Man was it ever hard to fit everything inside a tear drop bodywork! I had to use the middle of the seats for the Sbrick, which may not look too cosmetically appealing, but I can assure you it did completely strengthen the framework immensely. (this may be my sturdiest frame I've made) IMG_0043 by lachlan cameron, on Flickr Lastly, I kept the Veneno to race the Ford GT as they have identical gearing. If you watch the video, you'll see who wins. I will work with Thorsten as well for professional instructions in the future. Ford GT back view ? by lachlan cameron, on Flickr A big thanks to @brunojj1 for suggesting to place more studs between the wheels. I tried it this time (2 extra studs) and I feel it looks proper. thanks! Ford GT - white room - filter by lachlan cameron, on Flickr    Edited January 22, 20187 yr by Lox Lego
September 9, 20177 yr Very nice car, another masterpiece! The pushrod suspension looks complicated! Are the engine blocks see-thru?
September 9, 20177 yr Can you show the rear suspension linkage from above? Excellent build. Edited September 9, 20177 yr by z3_2drive
September 9, 20177 yr One build after another, after another, after another.... Just keeps getting better... Cannot believe can keep this up! The shaping on the GT is crazy... It flows really well, just like the real thing.
September 10, 20177 yr All I can do is echo what everyone else is already said. It's beautiful!  And one of those MOCs that look amazing from every angle. You outdo yourself every time. I have only one critique, the A-pillars on the windshield are a bit too rounded. You can see this on the blueprint overlayed on the picture. But other than that it's perfect!
September 10, 20177 yr Again, this is a beautifully shaped car you made into LEGO form! Truly masterpiece...
September 10, 20177 yr Awesome dude,these are all fantastic cars. Thorsten will make some sweet instructions!!
September 10, 20177 yr Beautifull  and now guys seriosly you have to stop building such masterpieces of modern sportscars because I'm starting to like them - and that is bad really bad really really bad...
September 10, 20177 yr Amazing, purely amazing! Seats are very nicely done, I like them very much. Curves are great. You are outdoing yourself with each car. I hope you have a full list of planned cars
September 10, 20177 yr 11 hours ago, Lox Lego said: Ford GT - From drawing board to reality At last. My hero!
September 11, 20177 yr Author On 2017-09-09 at 7:01 PM, TechnicRCRacer said: Very nice car, another masterpiece! The pushrod suspension looks complicated! Are the engine blocks see-thru? Thanks @Technic RC Racer! The pushrod suspension works so well. It provides just enough torsion to hold the car at 2 height settings. Yes, those are old see thru engine blocks On 2017-09-09 at 7:16 PM, Aventador2004 said: Another excellent build, so fast you build, it amazes me! Thanks @Aventador2004! On 2017-09-09 at 7:19 PM, z3_2drive said: Can you show the rear suspension linkage from above? Excellent build. Thanks @z3_2drive! On 2017-09-09 at 7:20 PM, BrickbyBrickTechnic said: Everything is spot on. Your cars just look better and better! Thanks! I used the scaling to reference each part of the bodywork. On 2017-09-09 at 7:22 PM, Saberwing40k said: It's so pretty. I want instructions so bad! There will be instructions made for sure On 2017-09-09 at 7:25 PM, LvdH said: You keep outdoing yourself... every... single... time. Seriously though, the Ford GT is one hard car to recreate. And you pulled it off (again) amazingly well! I love the flowing line from the hood, to the windshield, to the rear. If I had to complain about one thing is that the rear wheels seem off-center to the fender pieces. Thanks On 2017-09-09 at 7:29 PM, Leonardo da Bricki said: One build after another, after another, after another.... Just keeps getting better... Cannot believe can keep this up! The shaping on the GT is crazy... It flows really well, just like the real thing. Cheers! That was the plan with the flex axles, provide the shapes very difficult to replicate On 2017-09-09 at 8:21 PM, move5 said: What a masterpiece design! I love it Thanks move5! I did not think it would turn out this way half way thru that for sure. Regards! On 2017-09-09 at 9:36 PM, Offroadcreat1ons said: All I can do is echo what everyone else is already said. It's beautiful!  And one of those MOCs that look amazing from every angle. You outdo yourself every time. I have only one critique, the A-pillars on the windshield are a bit too rounded. You can see this on the blueprint overlayed on the picture. But other than that it's perfect! Thanks Offroad creations! Yes, the pillars were a bit too rounded, but I also did not want a straight windshield so I opted for the flex axles. On 2017-09-09 at 10:15 PM, Isamudyson said: Wow just wow. Your builds are so quick yet so detailed Thanks! I try to complete one section of the car each time I build so that I'm always moving forwards with the new model. Its rewarding to push yourself like that! On 2017-09-10 at 0:32 AM, KamalMYafi said: Again, this is a beautifully shaped car you made into LEGO form! Truly masterpiece... Thank you Kamal! On 2017-09-10 at 1:18 AM, AFOLegofan66 said: Awesome dude,these are all fantastic cars. Thorsten will make some sweet instructions!! Thanks @AFOLegofan66!! I bet he will, so many curves to replicate. It will be a challenge!~ On 2017-09-10 at 2:56 AM, mocbuild101 said: Amazing! - If only it was as fast as it looks... That would be so cool...   I know right!!?? On 2017-09-10 at 3:27 AM, MangaNOID said: Very awesome! Thanks! On 2017-09-10 at 4:53 AM, jorgeopesi said: Your best car so far. Wow bold statement, thank you! On 2017-09-10 at 5:19 AM, I_Igor said: Beautifull  and now guys seriosly you have to stop building such masterpieces of modern sportscars because I'm starting to like them - and that is bad really bad really really bad... Hahha classic. Thanks @I_Igor!! On 2017-09-10 at 6:25 AM, tomek9210 said: Amazing, purely amazing! Seats are very nicely done, I like them very much. Curves are great. You are outdoing yourself with each car. I hope you have a full list of planned cars THanks @tomek9210! That would be interesting to do, but I'm usually inspired by a car to really get into the build. Who know whats next? On 2017-09-10 at 6:46 AM, M_longer said: At last. My hero! hehe  thanks all. I've been playing with the car all day and everything works well. Truly enjoyed this build, a great challenge. Ford GT vs. Lamborghini Veneno by lachlan cameron, on Flickr Ford GT - underbelly shot by lachlan cameron, on Flickr Ford GT - Artwork by lachlan cameron, on Flickr Ford GT seats ? by lachlan cameron, on Flickr Edited September 11, 20177 yr by Lox Lego
September 11, 20177 yr If you will allow me to make a recommendation for your next project, I would suggest an Aston Martin RB 001 as a challenge, now that you have proved your capabilities with the Ford GT. AM-RB 001
September 11, 20177 yr If we're suggesting models, give the Aston Martin Vulcan a go! Definitely one of my top three favorite cars
September 11, 20177 yr How long did it take to build it? From idea to finishing? Is servo directly connected to the rack, or is there some gearing? The steering lock could be better. Did you think about using m motor for steering? And more complex front suspension geometry?
September 11, 20177 yr 4 hours ago, Jim said: This (combined with your previous work) certainly warrants the  Wow! Congrats lox!
September 11, 20177 yr On ‎9‎/‎9‎/‎2017 at 6:40 PM, Lox Lego said: This Ford GT is the ultimate expression of form following function. Its teardrop- shape body is the result of extensive work in the wind tunnel. Its carbon-fibre body and its 600-plus horsepower 3.5L EcoBoost V6 engine are the ultimate expressions of technological innovation.  A big thanks to @brunojj1 for suggesting to place more studs between the wheels. I tried it this time (2 extra studs) and I feel it looks proper. thanks! Incredible job once again Lox!  I especially like the transition from the roof down the side into the rear. The car just flows so well. I haven't been building as much lately as I took the summer off but you are making it difficult to keep up! You have created of queue of excellent supercars to build! I 100% agree that the 2 extra studs has made a big difference! The wheels don't look too large (or stubby looking in side view) any longer like on most of your other builds. They may grow on me but I am not a fan of the seats. I just don't think the flex axles look that good but I understand why you used them. This is just my humble opinion but I feel you have transformed the MOC Technic Supercar build community. I remember after your building your 2nd supercar thinking, if he can just make a better chassis and finalize the little things (steering on the Hennessey ) you would be an elite builder. You are sir are elite builder. 5 hours ago, Jim said: This (combined with your previous work) certainly warrants the  Well deserved and probably overdue!
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.