Lock Posted January 6, 2021 Posted January 6, 2021 @Neophyte_brickie I agree, everyone of us has his own tastes, and it’s right to follow them. As I’ve recently decided I don’t like at all the new movie trilogy I’m going to remove everything about it from my Falcon, minifigs included. So I guess I’ll give some tries to docking rings as well. :) Quote
Neophyte_brickie Posted January 6, 2021 Posted January 6, 2021 On 1/5/2021 at 12:24 AM, Willsy said: Finally managed to get this behemoth for my birthday, and I'm absolutely thrilled with it! There are definitely some modes I would like to make though, such as the empty space at the rear left of the ship and the cockpit interior. I do have a question though, I'm limited on storage space and I had to the to maybe use the box as a 'plinth' to display the Falcon, however I'm a bit concerned that the weight of the shop could cause damage. Has anyone else tried this, and could the box support the weight without being damaged in any way? I will likely look into the Efferman stand at some point anyway. I wouldn’t recommend you do this; I strongly suspect the completed model will be way too heavy and the box will be deformed. Maybe if you hide some kind of reinforcement within the box? But it would have to be very strong and rigid. Quote
Neophyte_brickie Posted January 6, 2021 Posted January 6, 2021 10 hours ago, Fuppylodders said: I was wondering... I'm not well versed in technic parts... Are the black non-wide links the same size connection as those grey tread links? I ask because, I wonder if it's a possibility to alternate a grey and black one, to then use the 2x3 lbg tile to create a more solid ring piece? The answer is - I don't think it would work. The connecting part of the link treads and the older style large technic link chains (that incorporate a couple of studs) are similar in the way they connect but different in size. Interestingly there is also another part just called a technic link chain that does connect to the link tread, but I can't see a way you would connect a tile or any other lego part to it - it looks like just the connecting portion of the link tread (ie the link tread minus the tread part). Quote
Onecrazy95civic Posted January 6, 2021 Posted January 6, 2021 Good day all, New to this site and newly owner of the Millennium Falcon 75192. Still building it and am very amazed by how this things is done. Anyway am already planning some modifications, already place orders for LEGO parts to do fix the engine look and the flap between the mandibles. Once those modes are done I intend to clean up the underside before doing stuff with the empty rooms in the interior. Love some of the ideas and genuity that went behind some of the mods. Will be honest will probably copy some of them to incorporate to mine. I'm sure I'll have some questions along the way...looking forward to you guys input. Quote
Onecrazy95civic Posted January 7, 2021 Posted January 7, 2021 On 3/23/2020 at 11:36 PM, Trekrider said: Just completed my Kessel Run Escape Pod by @Bigfoot, I managed to download it before Lego shut down all MF mods. I had to change some of the internals as some parts weren't available. Very neat how it attaches. Escape 1 by Barry Lunn, on Flickr Escape 2 by Barry Lunn, on Flickr Escape 3 by Barry Lunn, on Flickr Escape 4 by Barry Lunn, on Flickr Good day, Love this!!! Where can I get the instruction/parts list for this project? Are you able to send them to me? Thanks Quote
Trekrider Posted January 7, 2021 Posted January 7, 2021 15 minutes ago, Onecrazy95civic said: Good day, Love this!!! Where can I get the instruction/parts list for this project? Are you able to send them to me? Thanks Hi, The link to the files on Dropbox is here: https://www.dropbox.com/sh/bbfzp1o0tw1m5yo/AAAo4Dal90n4G5hD1WsevLd1a?dl=0 Quote
Onecrazy95civic Posted January 7, 2021 Posted January 7, 2021 3 minutes ago, Trekrider said: Hi, The link to the files on Dropbox is here: https://www.dropbox.com/sh/bbfzp1o0tw1m5yo/AAAo4Dal90n4G5hD1WsevLd1a?dl=0 Unable to open the IO file...I guess that is because I'm from Canada. Quote
Trekrider Posted January 7, 2021 Posted January 7, 2021 1 minute ago, Onecrazy95civic said: Unable to open the IO file...I guess that is because I'm from Canada. I doubt your location has anything to do with it - it is a stud.io file, do you have studio loaded on your machine? Quote
Onecrazy95civic Posted January 7, 2021 Posted January 7, 2021 2 minutes ago, Trekrider said: I doubt your location has anything to do with it - it is a stud.io file, do you have studio loaded on your machine? Lol...new to all this...didn't have but do know and am looking at them. Thanks! Quote
Trekrider Posted January 7, 2021 Posted January 7, 2021 Just now, Onecrazy95civic said: Lol...new to all this...didn't have but do know and am looking at them. Thanks! Glad to know it worked out - welcome to the group by the way Quote
Onecrazy95civic Posted January 7, 2021 Posted January 7, 2021 19 minutes ago, Trekrider said: Glad to know it worked out - welcome to the group by the way Thank you and looking forward to be posting the evolution of my Millennium Falcon...lol... One last question am looking on the how to built but where do I find the parts list needed to built it? Quote
Trekrider Posted January 7, 2021 Posted January 7, 2021 6 minutes ago, Onecrazy95civic said: Thank you and looking forward to be posting the evolution of my Millennium Falcon...lol... One last question am looking on the how to built but where do I find the parts list needed to built it? You need to upload the stud.io file to Bricklink and it will give you the parts list there Quote
Vouatch Posted January 7, 2021 Posted January 7, 2021 On 1/5/2021 at 12:32 PM, Neophyte_brickie said: Since you asked, @Vouatch: IMG_0316 by Robert O'Sullivan, on Flickr IMG_0688 by Robert O'Sullivan, on Flickr IMG_0694 by Robert O'Sullivan, on Flickr I'm undecided. If possible I'd like to somehow hide the 1x1 round plates on the left and right edges. It does look very similar to the model, but without the macaroni tiles there is something unfinished about the overall appearance. Unfortunately it seems none of the 1x1 modified plates or tiles with clips are available in dark tan, so I would probably go with light bluish grey for those. Also, bucket handles in light bluish grey seem to be a rarity, and very expensive, so I'll probably have to leave those as dark tan. As I read somewhere, "you did my day" !!! Thanks to test my ideas, I'm so confused not to have the possibility to try it my self. I have many many Legos but not those pieces. Clearly you are going near and near to the model! And as much I look at the rendering, as much I like it! I agree that it seems to miss something to perfectly finish the border of the external circle... I will think about this ( when I could disconnect from my job) ... and why not try to put in a very unorthodox way a Light Bluish Gray Hose, Rigid 3mm in circle just inside the circle to create the final border and to hide your 1 x 1 round plate? You will need of course to cut it at the good length. It shoulb be maintained by upper and lower 3L bar 19 hours ago, Onecrazy95civic said: Good day all, New to this site and newly owner of the Millennium Falcon 75192. Still building it and am very amazed by how this things is done. Anyway am already planning some modifications, already place orders for LEGO parts to do fix the engine look and the flap between the mandibles. Once those modes are done I intend to clean up the underside before doing stuff with the empty rooms in the interior. Love some of the ideas and genuity that went behind some of the mods. Will be honest will probably copy some of them to incorporate to mine. I'm sure I'll have some questions along the way...looking forward to you guys input. Welcome with us !!! 10 hours ago, Onecrazy95civic said: Good day, Love this!!! Where can I get the instruction/parts list for this project? Are you able to send them to me? Thanks Me too, and today I can't see a falcon without his safety module!!! Look at mine : Quote
Lock Posted January 7, 2021 Posted January 7, 2021 (edited) In the last weeks I've followed with interest the evolution of your dock rings and, while I'm still not convinced I want to change the default ones (I don't think they're very bad), I've decided to give it a try, so here's my idea. :) First of all I'd like to celebrate with one minute of silence my loved 856 Bulldozer (I guess in US it has a different number) because I had to mutilate it in order to get some piece. :P Second, please forgive me for the bad images (my iPhone 6S is getting really old) and for the rainbow color of the pieces: I didn't have the most I needed so I had to improvise with what I had. Ok, let's start: I went with a 10 sides polygon. Not because I wanted exactly 10 sides but... well, it's what came out after one hour of efforts: While the construction is very delicate, once mounted it's quite sturdy (but still not good for play). What I really cared of was to have the inclined plates. The gap between the ring and the "body" can be minimized adding some plates or rings; I didn't change the original Lego design at all (forgot). :) Here you can see the wheel of the bulldozer. :) I've chosen this method to leave plenty of space for the inside greeblings of the ring. Later on this topic. This is the heart of the concept. Here's how it works: The light tan is the plate, the dark tan should have been 1x3 but I didn't have, so ignore it. The gap between the 1x2 brick and the rest of the structure is to keep it anchored to the tracks. Also ignore the 1x2 brick with hole, it's not the correct piece, but it's a pic from a previous version. The correct pieces are two 1x2 plates, as you can see in the previous image. Anyway, this way the 1x3 plate goes "inside" the track and it's kept secured by the rear brick (plate). Here's the result, seen from behind. Very colorful! :) The inside (front) part of the ring can be connected in various ways, for example here I'm using an axle: I didn't work on this detail because I think @Neophyte_brickie solution, that I love, could be adapted without any problem. This is just (a part of) the original lego inside ring, as example: Of course a round plate could (and should) cover the parts below the external plates. I think it's also possible to implement the nice "corner plates" as in the rendering of @Vouatch, to make the external ring more similar to the real thing; unfortunately I didn't have any of them. Well, maybe it still need some small improvements here and there (and a wise choice of colors to minimize gaps) but I think it's not bad. Should I change original ones I think I'll go this way; or something similar. :) Edited January 7, 2021 by Lock Quote
Willsy Posted January 7, 2021 Posted January 7, 2021 On 1/6/2021 at 1:20 AM, Neophyte_brickie said: I wouldn’t recommend you do this; I strongly suspect the completed model will be way too heavy and the box will be deformed. Maybe if you hide some kind of reinforcement within the box? But it would have to be very strong and rigid. Yeah I decided against it, it's going to live on top of my wardrobe. Eyeing up pieces for the Efferman stand but ~£50 is quite steep! The acrylic options seem to cost about the same as well. Quote
Onecrazy95civic Posted January 8, 2021 Posted January 8, 2021 13 hours ago, Vouatch said: As I read somewhere, "you did my day" !!! Thanks to test my ideas, I'm so confused not to have the possibility to try it my self. I have many many Legos but not those pieces. Clearly you are going near and near to the model! And as much I look at the rendering, as much I like it! I agree that it seems to miss something to perfectly finish the border of the external circle... I will think about this ( when I could disconnect from my job) ... and why not try to put in a very unorthodox way a Light Bluish Gray Hose, Rigid 3mm in circle just inside the circle to create the final border and to hide your 1 x 1 round plate? You will need of course to cut it at the good length. It shoulb be maintained by upper and lower 3L bar Welcome with us !!! Me too, and today I can't see a falcon without his safety module!!! Look at mine : Your safety module seems different from the other...is that possible? Also, you have an interior? Already started to order parts...lol Quote
Willsy Posted January 8, 2021 Posted January 8, 2021 So I found this stand on eBay and I was wondering if anyone else has it and if so what their impressions are on it? I'm a bit concerned that it only wraps around the landing gear holes on one side. Quote
Onecrazy95civic Posted January 8, 2021 Posted January 8, 2021 (edited) Finally done!!! Very impressed with this masterpiece, can't wait to get my orders from BrickLink to get going on some of the upgrade/modification on it. Also is there a reason why I'm limited w/upload of pics? Wanted to put a pic of some of the pieces that were left over and wanted to know if it was normal...I check and double check and pretty sure didn't miss a step. Edited January 8, 2021 by Onecrazy95civic Quote
Vouatch Posted January 8, 2021 Posted January 8, 2021 3 hours ago, Onecrazy95civic said: Finally done!!! Very impressed with this masterpiece, can't wait to get my orders from BrickLink to get going on some of the upgrade/modification on it. Also is there a reason why I'm limited w/upload of pics? Wanted to put a pic of some of the pieces that were left over and wanted to know if it was normal...I check and double check and pretty sure didn't miss a step. Good job !! Personnaly, I had a 2 x6 plate and it wasn't normal, I took many time before finding where it could go. You should only have very little parts, nothing biger than 2 x 1 I think. For the pics on the forum... I don't know. I upload pictures from Flickr and it works good. My module between the mandibule is my creation, it was hard, long ... but I'm proud of if. Yes there is an interior, a cockpit for two passengers, an access to engine and a secret place for the death star plan. It can also be removed, and can completely be attached without any change on the original falcon. Build your one, epic job!! Quote
Onecrazy95civic Posted January 8, 2021 Posted January 8, 2021 3 minutes ago, Vouatch said: Good job !! Personnaly, I had a 2 x6 plate and it wasn't normal, I took many time before finding where it could go. You should only have very little parts, nothing biger than 2 x 1 I think. For the pics on the forum... I don't know. I upload pictures from Flickr and it works good. My module between the mandibule is my creation, it was hard, long ... but I'm proud of if. Yes there is an interior, a cockpit for two passengers, an access to engine and a secret place for the death star plan. It can also be removed, and can completely be attached without any change on the original falcon. Build your one, epic job!! Funny have also a plate of 2x6 left over!!! Have no idea where it goes...and a bunch of little 1 x 1 plates. Will base my escape pod from the instruction I got and will mod it to my taste...not sure about an interior, but will see. Quote
Vouatch Posted January 8, 2021 Posted January 8, 2021 @Lock I'm so happy to see you again in this tread, I was so fascinated by your ideas when I red the topic during first Covid stay at home in france! You shared us a new approach on how to build this tile circle around the docking bay, and I like the fact you win to use 2x tiles, it's a little bit less round but you have a homogen surface faced to the version with only 1X tiles. Otherwise, I think that your circle is a little bit small, looks like only 6 studs larger, other versions we designed (or copied) came with 8 studs around and there is too much space between all the tiles around. May be you can upper the larger of the circle and have the possibility to add 1 or 2 tiles more. look at this master piece : wow 1 minute ago, Onecrazy95civic said: Funny have also a plate of 2x6 left over!!! Have no idea where it goes...and a bunch of little 1 x 1 plates. Will base my escape pod from the instruction I got and will mod it to my taste...not sure about an interior, but will see. remind me the color lol... may be this is the same as me !!! 7 hours ago, Willsy said: So I found this stand on eBay and I was wondering if anyone else has it and if so what their impressions are on it? I'm a bit concerned that it only wraps around the landing gear holes on one side. hi, ... the best way, for me of course, should be to use Lego to create the stand... not necessary to do the one of @efferman but your one. I assume that it need time and pieces Quote
Onecrazy95civic Posted January 8, 2021 Posted January 8, 2021 7 minutes ago, Vouatch said: @Lock I'm so happy to see you again in this tread, I was so fascinated by your ideas when I red the topic during first Covid stay at home in france! You shared us a new approach on how to build this tile circle around the docking bay, and I like the fact you win to use 2x tiles, it's a little bit less round but you have a homogen surface faced to the version with only 1X tiles. Otherwise, I think that your circle is a little bit small, looks like only 6 studs larger, other versions we designed (or copied) came with 8 studs around and there is too much space between all the tiles around. May be you can upper the larger of the circle and have the possibility to add 1 or 2 tiles more. look at this master piece : wow remind me the color lol... may be this is the same as me !!! hi, ... the best way, for me of course, should be to use Lego to create the stand... not necessary to do the one of @efferman but your one. I assume that it need time and pieces Gray. Quote
Vouatch Posted January 8, 2021 Posted January 8, 2021 Just now, Onecrazy95civic said: Gray. light or dark? Quote
Onecrazy95civic Posted January 8, 2021 Posted January 8, 2021 Just now, Vouatch said: light or dark? Light. Quote
Vouatch Posted January 8, 2021 Posted January 8, 2021 Just now, Onecrazy95civic said: Light. good luck lol ... 49 in the falcon... that will be hard to find lol Mine was tan I think take a look at 677 step for exemple on the plan procedure the one at 701 / 713 / 968 / 977 also, it's possible to forgot them and it works without others are really necessary so only 5 places to check, hope that will help you @Onecrazy95civic give feedback if you find Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.