sawyer klegr Posted March 26, 2018 Posted March 26, 2018 (edited) This lego great ball contraption miniloop uses a spinning wheel to lift the balls up onto a set of ramps. Then the balls role down the ramps and back to the start again. I have remade this in lego digital designer but can't find any good way of making PDF instructions from it, any suggestions on how to do this? Exporting the instructions as a HTML building guide does not seem to work very well (it does not show a parts list for each step) the instructions are on reabrickable here. Edited March 26, 2018 by sawyer klegr edit so I could link it on rebrickable Quote
dtoerien Posted March 26, 2018 Posted March 26, 2018 As before, many thanks - I will add this to our build list for Speech Day. The parts for your Lifting Cup Miniloop and Cardan Lift Miniloop have arrived (I haven't yet been able to source the string), and I am hoping to build them over the course of the week. Unfortunately, producing PDF instructions from LDD is two orders of magnitude beyond my current level of ability. Regards, Darryl Quote
sawyer klegr Posted March 26, 2018 Author Posted March 26, 2018 13 hours ago, dtoerien said: As before, many thanks - I will add this to our build list for Speech Day. The parts for your Lifting Cup Miniloop and Cardan Lift Miniloop have arrived (I haven't yet been able to source the string), and I am hoping to build them over the course of the week. Unfortunately, producing PDF instructions from LDD is two orders of magnitude beyond my current level of ability. Regards, Darryl Thanks! hope it will work well for you :) I also have no idea how to properly make instructions from LDD. Quote
Minique85 Posted March 26, 2018 Posted March 26, 2018 Another nice little module. For instructions from LDD, it is not easy as far as I know. Personally I used LDraw + LPub. It was quite a learning curve and takes time. Another option is Stud.io from BrickLink. I just finished a model and the tool is quite nice. You can set the steps for instructions in there and then get them once you upload the file to your workplace on BrickLink. Quote
dtoerien Posted March 26, 2018 Posted March 26, 2018 33 minutes ago, sawyer klegr said: Thanks! hope it will work well for you :) I also have no idea how to properly make instructions from LDD. Thank you. Is there any chance that you will remake your simplified Invisible Lift in LDD? I fully understand if not. 9 minutes ago, Minique85 said: Personally I used LDraw + LPub. It was quite a learning curve and takes time. Another option is Stud.io from BrickLink. I just finished a model and the tool is quite nice. You can set the steps for instructions in there and then get them once you upload the file to your workplace on BrickLink. Thank you for this advice - I will investigate Stud.io as time is too limited for LDraw, I fear. Quote
sawyer klegr Posted March 27, 2018 Author Posted March 27, 2018 7 hours ago, dtoerien said: Thank you. Is there any chance that you will remake your simplified Invisible Lift in LDD? I fully understand if not. Thank you for this advice - I will investigate Stud.io as time is too limited for LDraw, I fear. Thanks, I am not planning on making it in LDD although I am considering trying to make it in miniloop form, if it works I will make that one in LDD. I do have video instructions for it here although they are not the easiest to follow. Quote
dtoerien Posted March 27, 2018 Posted March 27, 2018 Thank you. I might hang on for that, then, if it happens - I was going to try it from the video instructions, but as I'm fairly certain that I don't have all the parts it is likely to be more difficult still. Quote
sawyer klegr Posted March 27, 2018 Author Posted March 27, 2018 On 3/27/2018 at 9:11 AM, Minique85 said: Another nice little module. For instructions from LDD, it is not easy as far as I know. Personally I used LDraw + LPub. It was quite a learning curve and takes time. Another option is Stud.io from BrickLink. I just finished a model and the tool is quite nice. You can set the steps for instructions in there and then get them once you upload the file to your workplace on BrickLink. Ok, thanks, I might try that then :) Quote
Ankoku Posted March 28, 2018 Posted March 28, 2018 I am guessing the instructions video is basically being played in reverse and it actually shows you taking it apart? Quote
turbopolofr Posted March 28, 2018 Posted March 28, 2018 On 27/03/2018 at 5:38 AM, sawyer klegr said: Thanks, I am not planning on making it in LDD although I am considering trying to make it in miniloop form, if it works I will make that one in LDD. I do have video instructions for it here although they are not the easiest to follow. hello, I'm nearly done converting Mini Invisible lift video into LDD. Stay tuned on Planet GBC to get it once released (should be somewhere next week, together with some building instructions in PDF format) To generate nice building instructions from a LDD model, I personaly use bluePrint software: You can download it here: http://www.eurobricks.com/forum/index.php?showtopic=108346 latest version is v26. the software is really easy and intuitive to use, free, and powerful. With some (hours of) rework of what is nativly generated (to place the bricks in the best order for a building), you can have ultra nice PDF file Polo Quote
sawyer klegr Posted March 29, 2018 Author Posted March 29, 2018 5 hours ago, turbopolofr said: hello, I'm nearly done converting Mini Invisible lift video into LDD. Stay tuned on Planet GBC to get it once released (should be somewhere next week, together with some building instructions in PDF format) To generate nice building instructions from a LDD model, I personaly use bluePrint software: You can download it here: http://www.eurobricks.com/forum/index.php?showtopic=108346 latest version is v26. the software is really easy and intuitive to use, free, and powerful. With some (hours of) rework of what is nativly generated (to place the bricks in the best order for a building), you can have ultra nice PDF file Polo Thank you! this helps a lot, thank you for making PDF instructions for the mini invisible lift too :) Quote
dtoerien Posted March 29, 2018 Posted March 29, 2018 3 hours ago, sawyer klegr said: Thank you! this helps a lot, thank you for making PDF instructions for the mini invisible lift too :) I echo these thanks - between the two of you, this almost certainly means that the Mini Invisible Lift will be in the Speech Day display. Darryl Quote
Minique85 Posted March 29, 2018 Posted March 29, 2018 (edited) 9 hours ago, turbopolofr said: To generate nice building instructions from a LDD model, I personaly use bluePrint software: You can download it here: http://www.eurobricks.com/forum/index.php?showtopic=108346 latest version is v26. the software is really easy and intuitive to use, free, and powerful. With some (hours of) rework of what is nativly generated (to place the bricks in the best order for a building), you can have ultra nice PDF file Polo Nice, I got to check that one next time. Thanks for the tip. Edited March 29, 2018 by Minique85 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.