June 11, 20204 yr Hi :) @Stewen could you further explain how do you assembled the additional parts on the lower front? I like this! Does anybody has more ideas to improve the hood of the Chiron? Edited June 11, 20204 yr by Reeneman Edit
June 12, 20204 yr 16 hours ago, Reeneman said: Hi :) @Stewen could you further explain how do you assembled the additional parts on the lower front? I like this! Does anybody has more ideas to improve the hood of the Chiron?  OK thank you.I think I owe you that. An openable hood is your own solution. Here the mounting on the "A" column and the rotating mirror…   rotating mirror…   openable motor housing   and a magnetic connector was also made on the door ... (a screw - mounted element on the right, and a small magnetic element on the left.   serial number converted to license plate rend   I also picked up this little winged because the lego factory solution of the same shape just kept dropping.   tilted converted lights…   The solution is to place the wing on the fender   the transfer to the 1x top and 1x front cooler at the connection has been resolved, resulting in this vision.   from top to bottom where everything meets   Finish...   can be compared...    Edited June 12, 20204 yr by Stewen
June 13, 20204 yr Trying to put the 42115 sian paddle shifters and suspention into the chiron, since they are just better. Stay tuned, Snipe Edited June 14, 20204 yr by SNIPE
June 17, 20204 yr 1 hour ago, astyanax said: Niiice! But is the horseshoe supposed to light up on the real car? Doubt it, but looks pretty funky
June 17, 20204 yr 5 hours ago, astyanax said: Niiice! But is the horseshoe supposed to light up on the real car? it's also scary https://www.youtube.com/watch?v=W3gDFRyeSu4 almost the original was available :) (Fits in front of the front seat with a 5x5 cm bluetooth subwoofer.) mine lego bugatti chiron  Edited June 17, 20204 yr by Stewen
July 5, 20204 yr On 6/12/2020 at 12:54 PM, Stewen said:  Could you please show on how to attach the panels above the lights and the cooler at the front. I really like your panels improvement!
July 6, 20204 yr 17 hours ago, Souryuuu said: Could you please show on how to attach the panels above the lights and the cooler at the front. I really like your panels improvement!  with pleasure…               Â
July 6, 20204 yr 1 hour ago, Stewen said:  with pleasure…                Thank you very much! But I still don’t get at the top of the cooler, how to attach the Black Slope, Curved 4 x 1 DoubleÂ
July 6, 20204 yr 10 minutes ago, Souryuuu said: Thank you very much! But I still don’t get at the top of the cooler, how to attach the Black Slope, Curved 4 x 1 Double which part? would you circle in the Photo?
July 6, 20204 yr Just now, Stewen said: which part? would you circle in the Photo? about the double curved on the front cooler part.
July 6, 20204 yr 41 minutes ago, Souryuuu said: about the double curved on the front cooler part. the factory solution is also good only the gray item is not needed + Edited July 6, 20204 yr by Stewen
July 13, 20204 yr I'm very late to this party, but I finally purchased and built the Bugatti, after waiting to see if I'd prefer its successor.  Aside from the lack of stickers (and a couple mechanical improvements which this thread addresses) the only thing I envy about the Lamborghini is the transmission being visible from below.  It seems like a shame to build such a complex mechanism and then have it almost invisible in the final product. It should be quite feasible to build the bottom frame with a Sian-style window.  I'll take a crack at it as some point, but thought I'd ask if anyone more talented was interested.  Anyway  @jb70, that would be my suggestion for 1.6, if there ever is one.  But I imagine a lot of folks in this thread have moved on to the new hotness.
October 18, 20204 yr Hello, guys. Here to share my RC Bugatti Chiron with one BuWizz. https://business.facebook.com/LEGOTechnicRC/videos/1736361749858635/
November 1, 20204 yr So I'm a bit late to the party... I don't own set 42083 because I wasn't interested in its color scheme, and also there was "something" about the front & sides that didn't inspire me (I always loved the rear, though). But I have a ton of red (and black), and so I thought, maybe I can try and tweak the pimped version toward this model here: Without further ado, here's my result. Of course my adaptations are debatable, but I'm happy with it. Â Many thanks to the authors of the pimped Chiron, and to many others who posted in this topic and inspired my mods. Â
November 28, 20204 yr I was able to put my hand on a Bugatti Chrion brand new for 250 euros and I'm quite happy and very excited to build it. But I will have to wait Xmas I already bought printed parts from Steindrucker and I'm waiting them. I knew this set suffers from differents aspects, especially gearbox and front suspension and I found this amazing topic with modification made by the entire team and @jb70 (you did an amazing job dude). Chiron must be perfect and I'm considering to buy the necessary parts to improve it but I have few questions: - Here I can see the nessecary parts for the improved chiron. On the left I have 4.8% unique parts and on the right 7.3%. Should I have to buy both listed parts or just one of the two ? (if yes which one, I'm a bit confused) -I think I'm gonna apply two/three major modification of @jb70 : front suspension, gearbox, doors and maybye the rear spoiler. My question is: what is the best way to mix both of the two instruction book (the offical one and @jb70's one ?°  Thank you so much for your help. Take care and have a good night.
December 1, 20204 yr On 11/28/2020 at 11:41 PM, Le_Combattant said:  "- Here I can see the nessecary parts for the improved chiron. On the left I have 4.8% unique parts and on the right 7.3%. Should I have to buy both listed parts or just one of the two ? (if yes which one, I'm a bit confused)"     The necessary parts are 270, on the right side of the page (7.3% unique).     On "export parts" you can download the complete list of additional parts.  "My question is: what is the best way to mix both of the two instruction book (the offical one and @jb70's one ?°"       @jb70's instructions replace the originals   Edited December 1, 20204 yr by barbanera
December 2, 20204 yr On 12/1/2020 at 5:54 PM, barbanera said: "- Here I can see the nessecary parts for the improved chiron. On the left I have 4.8% unique parts and on the right 7.3%. Should I have to buy both listed parts or just one of the two ? (if yes which one, I'm a bit confused)"     The necessary parts are 270, on the right side of the page (7.3% unique).     On "export parts" you can download the complete list of additional parts.  "My question is: what is the best way to mix both of the two instruction book (the offical one and @jb70's one ?°"       @jb70's instructions replace the originals   Yes I'm agree with you but I'm not interested by the  Hand of God (HoG) steering so how I'm supposed to do ?
December 2, 20204 yr 2 hours ago, Le_Combattant said: Yes I'm agree with you but I'm not interested by the  Hand of God (HoG) steering so how I'm supposed to do ? Sorry but I don't understand the point of the matter! is your first lego technic? Just skip the part of instructions that doesn't interest you, and for that part reproduce the official version without HoG. (As long as someone doesn't want to republish @jb70's instructions without hog). Edited December 2, 20204 yr by barbanera
December 3, 20204 yr 20 hours ago, barbanera said: Sorry but I don't understand the point of the matter! is your first lego technic? Just skip the part of instructions that doesn't interest you, and for that part reproduce the official version without HoG. (As long as someone doesn't want to republish @jb70's instructions without hog). Not it's not my first Technic^^ I have dozen of them. It will be my first modifiction of an official set.
December 6, 20204 yr I forgot that I had made a video of my red-black version... now uploaded to YouTube (no audio)
December 9, 20204 yr On 12/6/2020 at 6:06 PM, astyanax said: I forgot that I had made a video of my red-black version... now uploaded to YouTube (no audio) Color combination is very nice. The rotating support is cool!
.thumb.png.116032e930e483fb4ebbfdc62183bd34.png)
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.