July 6, 20231 yr Don’t leave .lif files that you have extracted in the directory, even if you renamed them. Move them completely away. LDD reads everything. So the files (= colours) in the original LIF could be used, and not the modified files in the extracted folder. Edited July 6, 20231 yr by SylvainLS
July 6, 20231 yr On 7/6/2023 at 4:50 PM, leonema said: all files are in their correct locations and are all from the rar file which date of 24/08/2022 that's why can't understand why i can't see all the colors in the palette :( There are two more things I can immediately think of. First, there is a newer update released on 29/12/2022 here, perhaps the missing colours you mentioned were added after the update file from August in a more recent update release, so always use the files from the latest update and check back regularly for new releases. Second, if you installed “LDD Version 4.3.12” instead of “LDD Version 4.3.11” there will be issues with the LDD files themselves, refer to my earlier post on how to install LDD perfectly on Windows using both installers.
July 6, 20231 yr On 7/6/2023 at 4:55 PM, SylvainLS said: Don’t leave .lif files that you have extracted in the directory, even if you renamed them. Move them completely away. LDD reads everything. So the files (= colours) in the original LIF could be used, and not the modified files in the extracted folder. yes, i just figured out exactly this i compressed the original files in 7z and then deleted completely and actually now can see properly all colors in the palette On 7/6/2023 at 4:58 PM, suenkachun said: There are two more things I can immediately think of. First, there is a newer update released on 29/12/2022 here, perhaps the missing colours you mentioned were added after the update file from August in a more recent update release, so always use the files from the latest update and check back regularly for new releases. Second, if you installed “LDD Version 4.3.12” instead of “LDD Version 4.3.11” there will be issues with the LDD files themselves, refer to my earlier post on how to install LDD perfectly on Windows using both installers. i'm using the 4.3.11 version
July 6, 20231 yr On 7/6/2023 at 5:01 PM, leonema said: i'm using the 4.3.11 version This is fine, I still recommend installing an update once released for access to the latest contents, in your earlier reply you mentioned using the rar from 24/08/2022 which is now outdated, the latest one is from 29/12/2022 as mentioned before.
July 6, 20231 yr On 7/6/2023 at 5:06 PM, suenkachun said: This is fine, I still recommend installing an update once released for access to the latest contents, in your earlier reply you mentioned using the rar from 24/08/2022 which is now outdated, the latest one is from 29/12/2022 as mentioned before. in fact i'm used to do so guess i installed the august version by mistake today when was trying to fix the problem...
July 7, 20231 yr Hi @Stephan part 35459 collision issue Thank you Edited February 5, 20241 yr by Yangster
July 7, 20231 yr On 7/7/2023 at 12:33 PM, Yangster said: Hi @Stephan part 35459 collision issue https://imgur.com/a/LIFpiuR Thank you Yes, I believe I already added collisions for the next update for this part :)
July 11, 20231 yr Would these parts be included in a future update ? I recall seeing the models in this forum teased in previous updates but never included. I've also been curious about the addition of capes with collars such as pieces used for Martian Manhunter or Doctor Strange. https://www.bricklink.com/v2/catalog/catalogitem.page?P=59276#T=C https://www.bricklink.com/v2/catalog/catalogitem.page?P=41637#T=C https://www.bricklink.com/v2/catalog/catalogitem.page?P=47544pb01#T=C
July 26, 20231 yr Any chance of having the 81 x 35 Tractor Tire added? Part no. 69912, so far only used in the 42129 Mercedes-Benz Zetros set.
August 6, 20231 yr For some strange reason, I just discovered that Part 4036 Train Window Glass will no longer attach to Part 4035 Train Window, below is the screenshot showing this behaviour. I have not modified anything in my LDD system files so the cause of this is quite a mystery. On a current project which used this connection before, the Glass are all still in their correct locations but just “scaffolded” into place and are no longer properly attached to the Window Frames. Hopefully, this can be a speedy fix for the upcoming LDD update, thanks.
August 7, 20231 yr I have decorations to share: Dice: <Mapping decorationID="4594374" designID="3068" surfaceID="1"/> <!-- dice 1 black dot --> <Mapping decorationID="4540383" designID="3068" surfaceID="1"/> <!-- dice 2 black dot --> <Mapping decorationID="4540387" designID="3068" surfaceID="1"/> <!-- dice 3 black dot --> <Mapping decorationID="4540388" designID="3068" surfaceID="1"/> <!-- dice 4 black dot --> <Mapping decorationID="4540391" designID="3068" surfaceID="1"/> <!-- dice 5 black dot --> <Mapping decorationID="4556011" designID="3068" surfaceID="1"/> <!-- dice 6 black dot --> image links: dice 1 black dot: 4594374.png dice 2 black dot: 4540383.png dice 3 black dot: 4540387.png dice 4 black dot: 4540388.png dice 5 black dot: 4540391.png dice 6 black dot: 4556011.png Edited August 7, 20231 yr by Cregory
August 7, 20231 yr I have decorations to share: Heroica dice: <Mapping decorationID="4625437" designID="3068" surfaceID="1"/> <!-- dice Heroica Runes (ᚺᛖᚱᚩᛁᚳᚪ) Shield --> <Mapping decorationID="4625436" designID="3068" surfaceID="1"/> <!-- dice Heroica 1 Black Dot Skull Sword --> <Mapping decorationID="4625428" designID="3068" surfaceID="1"/> <!-- dice Heroica 2 Black Dots Skull --> <Mapping decorationID="4625429" designID="3068" surfaceID="1"/> <!-- dice Heroica 3 Black Dots Sword --> Image links: dice Heroica Runes (ᚺᛖᚱᚩᛁᚳᚪ) Shield: 4625437.png dice Heroica 1 Black Dot Skull Sword: 4625436.png dice Heroica 2 Black Dots Skull: 4625428.png dice Heroica 3 Black Dots Sword: 4625429.png Edited August 7, 20231 yr by Cregory
August 7, 20231 yr On 7/26/2023 at 3:17 AM, TechnicFan68 said: Part no. 69912, so far only used in the 42129 Mercedes-Benz Zetros set. Yes, this one can be added :). I thought I already did, but apparently not. On 8/6/2023 at 10:06 PM, suenkachun said: Hopefully, this can be a speedy fix for the upcoming LDD update, thanks Hmm, I will check this.
August 7, 20231 yr I have decorations to share. Nixel Faces (I placed them below the existing nixel faces and remarked the existing two.): <Mapping decorationID="606885" designID="14769" surfaceID="1"/> <!-- Existing Nixel Face --> <Mapping decorationID="606886" designID="14769" surfaceID="1"/> <!-- Existing Nixel Face --> <Mapping decorationID="6097124" designID="14769" surfaceID="1"/> <!-- Added Nixel Face --> <Mapping decorationID="6133696" designID="14769" surfaceID="1"/> <!-- Added Nixel Face --> <Mapping decorationID="6135175" designID="14769" surfaceID="1"/> <!-- Added Nixel Face --> <Mapping decorationID="6142859" designID="14769" surfaceID="1"/> <!-- Added Nixel Face --> <Mapping decorationID="6142861" designID="14769" surfaceID="1"/> <!-- Added Nixel Face --> <Mapping decorationID="6146745" designID="14769" surfaceID="1"/> <!-- Added Nixel Face --> <Mapping decorationID="6146749" designID="14769" surfaceID="1"/> <!-- Added Nixel Face --> <Mapping decorationID="6148296" designID="14769" surfaceID="1"/> <!-- Added Nixel Face --> Image links:6097124.png6133696.png6135175.png6142859.png6142861.png6146745.png6146749.png6148296.png
August 7, 20231 yr On 8/7/2023 at 7:26 PM, Cregory said: I have decorations to share. Where did you get the decorations? Because they look a bit rough?
August 7, 20231 yr The black dot dice and nixel faces were made from Stud.io screen caps. The heroica dice are edited scans of my actual new unused parts. The rough look is intentional in the original design. Edited August 7, 20231 yr by Cregory
August 7, 20231 yr Would it be difficult to make part 85863, micro figure decoratable? I collect Lego Games and like making them in LDD beforehand. There are so many micro figures I would like to make. Edited August 7, 20231 yr by Cregory
August 9, 20231 yr Would it be possible to add more Ninjago and original LEGO Theme parts in general? Here's a list of parts I would love to play around with in LDD: Reveal hidden contents - 11692 General Kozu Arms - 28680 Legacy Kozu Arms - 11692 Nadakhan Arms - 18731 Ultra Agents AntiMatter Hood - 18732 Ultra Agents Electrolyzer Hood - 52684 Minifigure Hood + Hat - 35636 Oni Mask - 36015 Dragon Hunter Hood - 41158 Ice Samurai Armor - 41153 Ice Samurai Helmet - 65072 Digi Ninja Hood - 65183 Digi Ninja Armor - 65073 Prime Empire Rat Head - 43693 Skull + making it decorable - 66953 Ninja Hero Hood - 65435 Ninja Hero Armor - 66959 Skull Sorcerer Hat + Mask - 69576 Mammatus Helmet - 76922 Kalmaar Head - 78172 Kalmaar Legs - 86185 Crystalized Samurai Helmet for Mask - 86211 Overlord Mask Any Dragons Rising part would be welcome as well. If its possible throw in some VIDIYO and Monkie Kid parts and I'm eating good. Edited August 9, 20231 yr by Mister_Loki
August 19, 20231 yr Just checked my current projects in LDD and added a few new Bricks to the list of all existing Bricks with a possible distorted Decoration surface (UV Mapping exceeding texture bounds), use this information when applying the fixes. Being simply a tiny visual issue these can always be modified later. To confirm the issues simply apply a full-size photo Decoration to each Brick’s main Decoration Surface and check the four edges of each Decoration displayed in LDD for any distortion. Already confirmed and clearly visible: Part 2431 Flat Tile 1×4, Part 3068 Flat Tile 2×2, Part 87079 Flat Tile 2×4, Part 4150 Flat Tile 2×2, Round (compare with similar Part 14769). Not yet confirmed but still visible: Part 15210 and Part 15210 Four-sided Sign With Snap, apply Decoration 93337 onto both and neither will be displayed 100% correctly. Potential new candidate: Part 3039 Roof Tile 2×2/45°, not sure what is going on here but when applying a Decoration which fills up the entire slope surface; sometimes the Decoration will get cut off on the left and right sides of the slope, sometimes the Decoration will not fill up the slope on the top and bottom sides, so it’s best to check this Brick’s UV Mapping too. Thanks.
August 21, 20231 yr Something I'd like fixed in the next update is the connection between https://img.bricklink.com/ItemImage/PN/86/32828.png and technic pins like https://img.bricklink.com/ItemImage/PN/5/89678.png It won't go all the way in even with limits removed. But are able to in real life.
August 22, 20231 yr On 8/21/2023 at 6:31 PM, Takanuinuva said: Something I'd like fixed in the next update is the connection between https://img.bricklink.com/ItemImage/PN/86/32828.png and technic pins like https://img.bricklink.com/ItemImage/PN/5/89678.png It won't go all the way in even with limits removed. But are able to in real life. That might be difficult since there is a colission between the connection of 32828 and the inside of the pins. That's unfortunately a bug. I'll see if I can find a workaround.
August 22, 20231 yr On 8/22/2023 at 5:02 AM, Stephan said: That might be difficult since there is a colission between the connection of 32828 and the inside of the pins. That's unfortunately a bug. I'll see if I can find a workaround. I'm referring to the fact that it doesn't reach the stopper part. It barely goes into technic pins at all.
September 8, 20231 yr Sorry for the delay in the update! There seems to he a problem with the LEGO part database. They update is waiting on the correct LEGO Braille bricks decoration numbers. Consider the amount of Braille bricks, I want to have all the numbers correct before I distribute the update.
September 10, 20231 yr Hello: long time no see you! I take a look into these: On 8/21/2023 at 6:31 PM, Takanuinuva said: Something I'd like fixed in the next update is the connection between https://img.bricklink.com/ItemImage/PN/86/32828.png and technic pins like https://img.bricklink.com/ItemImage/PN/5/89678.png It won't go all the way in even with limits removed. But are able to in real life. And find two solutions in the part 4274.xml: Delete axel type=19 entirely, in the connectivity section or Change the length of the same axel to a small size. So, in response to: On 8/22/2023 at 5:02 AM, Stephan said: That might be difficult since there is a colission between the connection of 32828 and the inside of the pins. That's unfortunately a bug. I'll see if I can find a workaround. it's not a bug; rathern a missmatch of the length.
September 11, 20231 yr On 9/10/2023 at 2:50 AM, Kuramapika1 said: And find two solutions in the part 4274.xml: Delete axel type=19 entirely, in the connectivity section or Change the length of the same axel to a small size. Can you send me your connection data for 4274?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.