eric trax Posted March 25, 2019 Posted March 25, 2019 (edited) Ever since Lego released the 42054 set, I've been waiting for a smaller size agricultural tire to be able to build a medium-sized tractor. Unfortunately, there are no smaller agriculture tires, but I decided to build a medium size tractor :) New Holland TM 140: The model was built to create instructions. Knowing this, I've created a compact chassis that I can use in the future. The tractor has a drive with a Large motor with gear ratio 1:7 and steering using a servomotor. Three-point hitch systems are raising by the medium's engine . The front one can be detached. In addition, the power shaft drives the medium motor (gear ratio 1:3). The model has 4 functions so it is controlled by sbrick I had to limit the amount of details so that everyone can easily build such a model after buying the instructions. The original fits very well with building from bricks. I am very happy with how it looks because it's hard to know that it's a LEGO model. The instructions have been created for me by M_Longer Creations. Thanks Marek! Parts list in Rebrickable, Bricklink XML, Brickstore and png versions can be found here:https://bricksafe.com/pages/M_longer/misc/nh140 Instructions can be bought at Sellfy and Rebrickable: https://sellfy.com/m1longerhttps://rebrickable.com/users/M_longer/mocs/ Claas Quadrant 2200RC I did not want to build only a tractor. I decided that I would build a straw baler. I chose the Claas Quadrant 2200 RC. It seemed to me that it would be possible to copy it very well in bricks. The original machine has very many curves. In the end, I managed to build everything and put a lot of details. An additional function is moving the straw bales and the next ones can be put on the top of the machine. More photos: Video: Thank you for reading and all the comments! :) Edited March 25, 2019 by eric trax Quote
1gor Posted March 25, 2019 Posted March 25, 2019 (edited) I suppose that rear rims are painted white...perhaps this wheel in white can be useful. It look like current Tractor tire would (probably) remain only size, so I have decided to make systems tractors (they have mostly the same wheel sizes) New Holland and CLAAS baller look nice combo Edited March 29, 2019 by I_Igor Quote
Ivan_M Posted March 25, 2019 Posted March 25, 2019 This is indeed very nice creation, esp. at ~1000 parts. The only thing I don't like is that BB burried deep in frame, I would rather see it under hood, but I totaly understand it, the decision how to implement it even in bigger models always give me headache. Quote
M_longer Posted March 25, 2019 Posted March 25, 2019 13 minutes ago, Ivan_M said: The only thing I don't like is that BB burried deep in frame, But it is a rechargeable one, which does not need to be taken out from the frame :) Minifig size comparison: Quote
Aleh Posted March 25, 2019 Posted March 25, 2019 Already saw it on rebrickable.com! Excellent MOC! Looks terrific! Super realistic! Quote
WvG_853 Posted March 25, 2019 Posted March 25, 2019 A big thanks for the instructions to both of you! I have bought them already. One thing is to admire the perfection of your creations, but a second is to be able to build them yourself. Thanks! Quote
Seasider Posted March 25, 2019 Posted March 25, 2019 My Dad used to work for New Holland. Love the Tractor and Bailer combo although I'm sure my Dad would complain you haven't made a New Holland Bailer to go with it. Is any of this custom parts ? I might have to build the tractor now that I have an Sbrick too Quote
M_longer Posted March 25, 2019 Posted March 25, 2019 1 hour ago, Seasider said: Is any of this custom parts ? I might have to build the tractor now that I have an Sbrick too No, there are no old/rare/custom cut parts, we tried to make it possible to build ;) Quote
trekman Posted March 25, 2019 Posted March 25, 2019 A very nice clean and tidy build, with the proper linkage. Well done. Quote
eric trax Posted March 25, 2019 Author Posted March 25, 2019 9 hours ago, Ivan_M said: This is indeed very nice creation, esp. at ~1000 parts. The only thing I don't like is that BB burried deep in frame, I would rather see it under hood, but I totaly understand it, the decision how to implement it even in bigger models always give me headache. 5 hours ago, M_longer said: No, there are no old/rare/custom cut parts, we tried to make it possible to build ;) When building a model, I tried not to waste bricks. At the stage of creating the manual, we introduced some delicate changes so that everyone could build it with the original parts available I immediately used a charged battery so that it would not have to be removed from the frame because it is actually a problem. Unfortunately, the mask is too narrow to hide there. 10 hours ago, I_Igor said: I suppose that rear rims are painted white...perhaps this wheel in white can be useful. AS things look like current Tractor tire would (probably) remain only size, so I have decided to make systems tractors (they have mostly the same wheel sizes) New Holland and CLAAS baller look nice combo @I_Igor I follow your progress in models and I like them a lot. I am waiting for both MF and Fastrac! <3 Thank you all for the very positive feedback! :) Quote
Maaboo the Witch Posted March 25, 2019 Posted March 25, 2019 Simply gorgeous! Definitely more Model Team than Technic but no less incredible for it. Amazing as usual, Eric. Your stuff is always a treat to look at. Quote
hpil Posted March 25, 2019 Posted March 25, 2019 Oooohhhh, that is stunning! Well done for getting so much in to a small space. Quote
1gor Posted March 26, 2019 Posted March 26, 2019 7 hours ago, eric trax said: @I_Igor I follow your progress in models and I like them a lot. I am waiting for both MF and Fastrac! Fastrac is finished and I hope to make good photos at weekend due to sunny days expecting... Syn-trac is slowly progressing (3 way steering works only on non suspended axles ) Regards Quote
KirTech LAB Posted March 26, 2019 Posted March 26, 2019 Incredible model! Lego, we need white wheels!!! Quote
MxWinters Posted March 26, 2019 Posted March 26, 2019 Very impressive model, great details, love the baler too. The only downside is its too clean, needs to be covered in mud and dirt . Quote
Kio Liex Posted March 27, 2019 Posted March 27, 2019 Really amassing MOC and great that there is instructions, I'll be getting them in the future. Do the instuction include the Claas Quadrant 2200RC? Quote
M_longer Posted March 27, 2019 Posted March 27, 2019 2 hours ago, Kio Liex said: Do the instuction include the Claas Quadrant 2200RC? No, only NH tractor. Quote
eric trax Posted March 28, 2019 Author Posted March 28, 2019 (edited) Thank you all for a very positive opinion. As an addition, I would like to show you what the model with Playmobil 86x26 tires looks like which I have adapted to replace smaller agricultural tires Edited April 8, 2019 by eric trax Quote
Ivan_M Posted March 28, 2019 Posted March 28, 2019 Looks terrific, are they soft or hard rubber? How do they fit rim? I have 80mm Fishertechnic tires and while they fit on rim perfectly the pattern is too rough to pair them with claas tires Quote
eric trax Posted March 28, 2019 Author Posted March 28, 2019 They are made of little bit harder rubber as xerion tires and they perfectly fit for 43 mm rims Quote
technicbuilder Posted March 29, 2019 Posted March 29, 2019 On 3/27/2019 at 3:00 PM, M_longer said: No, only NH tractor. Do you have plans to make instructions for the Quadrant .Thanks . Quote
eric trax Posted March 29, 2019 Author Posted March 29, 2019 56 minutes ago, technicbuilder said: Do you have plans to make instructions for the Quadrant .Thanks . @technicbuilder nope, only for tractor Quote
hpil Posted March 30, 2019 Posted March 30, 2019 Instructions bought 23 hours ago, eric trax said: @technicbuilder nope, only for tractor That is a real shame - its a great model. Anything that can be done to change your mind...? Quote
eric trax Posted March 31, 2019 Author Posted March 31, 2019 10 hours ago, hpil said: Instructions bought That is a real shame - its a great model. Anything that can be done to change your mind...? Unfortunately, nothing will change my mind. There are a lot of illegal connections in the model. Without them it is impossible to build this model so there will be no instructions ;) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.