Jump to content
THIS IS THE TEST SITE OF EUROBRICKS! ×
THIS IS THE TEST SITE OF EUROBRICKS!

Recommended Posts

Posted (edited)
3 hours ago, Otherworld said:

A minifigure pack? Wait no, this is too surreal already. I wonder if they would be completely generic students or actual characters like Parvati, Ernie/Justin Finch, Padma and Pansy?

It could go either way honestly. I think the biggest obstacle for that though is that Padma was changed to a Gryffindor in the movies and the trio of Ravenclaw boys in the DA were cut, so that really limits the named Ravenclaw students that could be included. 

Edited by Accio Lego
  • Replies 18.5k
  • Created
  • Last Reply

Top Posters In This Topic

Posted
2 minutes ago, Brick Guru said:

The Yule Ball happened in the Great Hall (in the book and movie) so I think it might be difficult to integrate that.

Good point

I have all 3 hogwarts sets from the new waves. I also have lots of the old sets.(troll sert, Cos...) During my childhood I collected all the 2010-11 sets. I connect the yule ball to the empty section on the great hall side

Posted
3 hours ago, Tommy269 said:

Looks really cool. Do you plan on adding the yule ball attachment?

I was going to add it to the Great Hall but it threw off the floor plan shape. I’ll probably end up removing the dancing mechanism and use it as a corner wall piece.

Posted
6 hours ago, Ferder said:

I was curious if I could better match the movie model blueprint by making the Quad form from the Grand Staircase Tower, instead of the far side of the Great Hall. I used the Room of Requirements to form one of the quad walls. It's a bit of a wonky "square" but at least now the Great Hall is at the correct 45-degree angle from the rest of the Castle. 

 

 

That looks great! Definitely the best configuration of the parts of the castle I’ve seen 

 

5 hours ago, Accio Lego said:

It could go either way honestly. I think the biggest obstacle for that though is that Padma was changed to a Gryffindor in the movies and the trio of Ravenclaw boys in the DA were cut, so that really limits the named Ravenclaw students that could be included. 

I rewatched OotP the other day and I saw a boy with long dark hair in the DA who fitted the description of Michael Corner, Ginnys ravenclaw boyfriend in the books but I might be mistaken. Also as the set is called Hogwarts students it could just contain unnamed characters like the Lego game. 

 

Posted
1 hour ago, Darth Shadowthrone said:

That looks great! Definitely the best configuration of the parts of the castle I’ve seen 

 

I rewatched OotP the other day and I saw a boy with long dark hair in the DA who fitted the description of Michael Corner, Ginnys ravenclaw boyfriend in the books but I might be mistaken. Also as the set is called Hogwarts students it could just contain unnamed characters like the Lego game. 

 

That is Michael Corner, the blond kid is also supposed to be Zacharias Smith. 

Ernie MacMillain, Hannah Abbot, Justin Finch-Fletchley, Le Anne and Marcus Belby are the other Hufflepuff and Ravenclaw to have speaking roles I believe, with Penelope Clearwater being a background character in CoS and Roger Davies as Fleur's dance partner in GoF. 

Posted

My preference for a Hogwarts Students pack would be four different packs, one for each house - one jumper, one robes, one quidditch and perhaps one Herbology jacket. 

If this is indeed a Students pack with one per house, all jumpers would be best I reckon. 

Posted
18 minutes ago, Seaber said:

My preference for a Hogwarts Students pack would be four different packs, one for each house - one jumper, one robes, one quidditch and perhaps one Herbology jacket. 

If this is indeed a Students pack with one per house, all jumpers would be best I reckon. 

I think that would be everyone's preference, we really need more army builder sets for this theme

Posted
11 minutes ago, Seaber said:

My preference for a Hogwarts Students pack would be four different packs, one for each house - one jumper, one robes, one quidditch and perhaps one Herbology jacket. 

If this is indeed a Students pack with one per house, all jumpers would be best I reckon. 

Assuming there would be a figure from each house I definitely think the Ravenclaw and Hufflepuff figures would have the standard jumpers but I'm not sure about the Gryffindor and Slytherin ones. One trend I've noticed in other minifigure packs is that there's at least one figure with unique printing as well so I think there could be a unique torso print for one of the houses - maybe a Slytherin torso printed with a scarf? (a look which is very present in Quidditch matches). However, it is possible that to make all the figures consistent they all just have the same style of jumper without robes or a coat printed over it. 

Apart from by houses I also think there will be equal representation in gender, with different looks for each figure like the Microfigures from the board game: 

harry-potter-micro-figure-earrings-stud-

But I also think just like the students in the CMF there will be more inclusion as well. I expect two or at least one figure to have a black or asian Lego skin-tone present in just the hands and the head piece, like Dean Thomas and Cho Chang from the cmf. Hopefully this will make it easier to customise characters like Angelina Johnson, Blaize Zabini, Lee Jordan and Lavender Brown from the first two films (heh :laugh:). 

Posted
1 hour ago, Darth Shadowthrone said:

Assuming there would be a figure from each house I definitely think the Ravenclaw and Hufflepuff figures would have the standard jumpers but I'm not sure about the Gryffindor and Slytherin ones. One trend I've noticed in other minifigure packs is that there's at least one figure with unique printing as well so I think there could be a unique torso print for one of the houses - maybe a Slytherin torso printed with a scarf? (a look which is very present in Quidditch matches). However, it is possible that to make all the figures consistent they all just have the same style of jumper without robes or a coat printed over it. 

Apart from by houses I also think there will be equal representation in gender, with different looks for each figure like the Microfigures from the board game: 

harry-potter-micro-figure-earrings-stud-

But I also think just like the students in the CMF there will be more inclusion as well. I expect two or at least one figure to have a black or asian Lego skin-tone present in just the hands and the head piece, like Dean Thomas and Cho Chang from the cmf. Hopefully this will make it easier to customise characters like Angelina Johnson, Blaize Zabini, Lee Jordan and Lavender Brown from the first two films (heh :laugh:). 

I'm really lacking in black and asian skin-toned minifigs so getting more would be great. As for the specific minifgss, I don't care if they're based on characters or not. I don't have any Hufflepuff or Ravenclaw torsos (when the Great Hall came out, I didn't have the money for it) so any torsos that aren't Slytherin or Gryffindor would be wonderful.

Posted

Just as a reminder, since not everybody has time to read every single post in here: 40419 being a minifig pack is just speculation based on the circumstance that 40418 turned out to be one. It might still be a Brickheadz set instead, so keep your expectations in check :classic: *steps down from soap box*

Posted
4 minutes ago, Lego-Freak said:

Just as a reminder, since not everybody has time to read every single post in here: 40419 being a minifig pack is just speculation based on the circumstance that 40418 turned out to be one. It might still be a Brickheadz set instead, so keep your expectations in check :classic: *steps down from soap box*

Yeah, I don't actually expect it to be a minifg pack. My thoughts were just that IF it was, then I would like it to have more diversity.

Posted
31 minutes ago, Lego-Freak said:

Just as a reminder, since not everybody has time to read every single post in here: 40419 being a minifig pack is just speculation based on the circumstance that 40418 turned out to be one. It might still be a Brickheadz set instead, so keep your expectations in check :classic: *steps down from soap box*

True, but at least we got something new to discuss. :P

Posted (edited)

Is there a complete list of all CMF series two minifigures that are confirmed and then the rumors for the rest? And rumors for Advent (I have seen Sirius Fred and George)

Edited by jwhitney
Posted
3 minutes ago, jwhitney said:

Is there a complete list of all CMF series two minifigures that are confirmed and then the rumors for the rest?

The ones that are confirmed are:

1. Harry Potter with potions book

2. neville longbottom with monsterbook

3. griphook

4. professor sprout

5. luna lovegood lionhead

6. dumbledore with fawkes

7. kingsley shacklebolt

8. bellatrix lestrage prisoner outfit

9. moaning myrtle 

RUMORED 

1. rita skeeter 

2. crabbe (harry)

3. Goyle (ron)

4. Cat Hermione

5. lockhart

6. madame pomfrey

7. lucius malfoy

 

Posted
14 minutes ago, jwhitney said:

And rumors for Advent (I have seen Sirius Fred and George)

The only concrete rumor we have is that it's based on OotP, it would make sense for Sirius to be included but there are currently no rumors about his inclusion. Fred and George are expected to come in Diagon Alley but that's not confirmed either although it would, once again, make sense.

Posted
On 4/28/2020 at 8:52 AM, Lego-Freak said:

I‘m gonna pull a @just2good here and marry that Burrow set :wub: I really didn‘t expect it to be this much better than the original! It eats the old one for breakfast

HAHAHAHAH, I might marry Privet Drive, a double wedding :grin:

Posted
15 hours ago, Ferder said:

I was curious if I could better match the movie model blueprint by making the Quad form from the Grand Staircase Tower, instead of the far side of the Great Hall. I used the Room of Requirements to form one of the quad walls. It's a bit of a wonky "square" but at least now the Great Hall is at the correct 45-degree angle from the rest of the Castle. 

 

ubhTWng.pngboAxnk4.png

That’s honestly amazing

good job! ?

Posted

The new book "Witches, wizards, creatures, and more" will include Voldemort and nagini and will be released in autumn. Is it a new variant of Voldemort and nagini?

Have it been released other hp books with exclusive minifigs/parts from 2018 and forward?

Posted
50 minutes ago, just2good said:

HAHAHAHAH, I might marry Privet Drive, a double wedding :grin:

Excellent! All we need now is a priest, and I might know just the guy... Is @Puresh still around or has he choked on the Joyce minifig? :grin:

25 minutes ago, Crookshanks said:

The new book "Witches, wizards, creatures, and more" will include Voldemort and nagini and will be released in autumn. Is it a new variant of Voldemort and nagini?

Have it been released other hp books with exclusive minifigs/parts from 2018 and forward?

Isn‘t that just the minifig from the graveyard set with the basilisk from the microscale Hogwarts? Or am I thinking of the wrong book?

Posted
2 minutes ago, Lego-Freak said:

Isn‘t that just the minifig from the graveyard set with the basilisk from the microscale Hogwarts? Or am I thinking of the wrong book?

No, you're right. In the book, Nagini isn't printed which is probably a bummer for those who are getting the book.

Posted
7 hours ago, Darth Shadowthrone said:

Assuming there would be a figure from each house I definitely think the Ravenclaw and Hufflepuff figures would have the standard jumpers but I'm not sure about the Gryffindor and Slytherin ones. One trend I've noticed in other minifigure packs is that there's at least one figure with unique printing as well so I think there could be a unique torso print for one of the houses - maybe a Slytherin torso printed with a scarf? (a look which is very present in Quidditch matches). However, it is possible that to make all the figures consistent they all just have the same style of jumper without robes or a coat printed over it. 

Hopefully this will make it easier to customise characters like Angelina Johnson, Blaize Zabini, Lee Jordan and Lavender Brown from the first two films (heh :laugh:). 

I'm hoping for maybe a couple of Student packs which could be something like:

1. Seamus Finnigan, Angelina Johnson with Blaise Zabini and Pansy Parkinson.

2. Justin Finch Fletchly, Ernie MacMillan with Penelope Clearwater and Marcus Belby.

I would want a copious sets like these where we have a few similar robe designs but with the varying house colours, and maybe some robes that look a like more like those in the RoR set.

I doubt a lot of these characters would appear, but they could make a few generic students with varying ages and races.

Posted

Love the idea of a ‘student pack’ of figures, hope if true the builds they come with is something useful like bookcases and maybe those stone torch ‘braziers’ 

Posted

I hope we will get a student pack! But I have a feeling we dont get all the houses in their robes.. More like Harry, Luna, Neville, Draco. With Luna and Draco in their robes or something like that, but I hope I have wrong.

1 hour ago, Lego-Freak said:

Isn‘t that just the minifig from the graveyard set with the basilisk from the microscale Hogwarts? Or am I thinking of the wrong book?

You probably have right. It's look like the same basilisk from Hogwarts and Voldemort from the graveyard set. Then I don't need to buy it.. :)

Does someone now if we have got something exclusive in other books from 2018 and forward?

Posted
8 minutes ago, Crookshanks said:

Does someone now if we have got something exclusive in other books from 2018 and forward?

Afaik the only exclusive thing so far is Tom Riddle

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.

Announcements

  • THIS IS THE TEST SITE OF EUROBRICKS!

×
×
  • Create New...