SpiderJazz Posted January 15, 2020 Posted January 15, 2020 I hope I did not overreact with my feedback with Black Widow, that picture is kinda blurry but I can tell you details are spot on.
lego_guyon02 Posted January 15, 2020 Posted January 15, 2020 11 minutes ago, SpiderJazz said: I hope I did not overreact with my feedback with Black Widow, that picture is kinda blurry but I can tell you details are spot on. You did not, if you ignore the hair it's a really good figure
BrickBob Studpants Posted January 15, 2020 Posted January 15, 2020 41 minutes ago, Guyon2002 said: Black Widow looks good, haircolor is bad though. Taskmaster is.... definetely a marvel figure Taskmaster does look a bit plain, but at least the torso and face prints seem accurate. Printed hoods have never been a thing and the lack of leg printing is to be expected by now Give him some good accessories and I’m happy
wesker Posted January 15, 2020 Posted January 15, 2020 Black Widow looks pretty good. Probably my favorite suit design so far. Taskmaster's minifigure looks pretty forgettable. The design is accurate enough to the movie but he just doesn't look that interesting compared to the comic book figure that came out a while back.
GoldenNinja3000 Posted January 15, 2020 Posted January 15, 2020 Black Widow looks good, but I don’t get why the figure is black when the suit in the movie is a metallic grey with black highlights. LEGO could’ve used pearl dark grey for the figure. Taskmaster doesn’t look good to me. The black hood clashes with the dark blue body and the lack of leg printing stands out. I hope the face print is good.
SpiderJazz Posted January 15, 2020 Posted January 15, 2020 1 hour ago, Guyon2002 said: You did not, if you ignore the hair it's a really good figure Thanks! Same goes for Yelena, I hope someone leaks her fig too. 55 minutes ago, Lego-Freak said: Taskmaster does look a bit plain, but at least the torso and face prints seem accurate. Printed hoods have never been a thing and the lack of leg printing is to be expected by now Give him some good accessories and I’m happy I think Drax's (GOTG2) legs works for Task Master. I want to see the shield so bad.
THELEGOBATMAN Posted January 15, 2020 Posted January 15, 2020 Black Widow looks awesome. The whole costume looks fantastic, dark grey hands look a bit off tho. Face print and hairpiece are okay, but the colour of hair is not. After 8 years, they are still using dark orange instead of red / dark red? Taskamster looks... ok I guess? I would like more blue (lighter than the colour of the whole minifig) and orange details, but it is kinda hard without leg prtining. Mask looks good (from what I can tell), and I know why they went with the black hood - they don't do dual-molded / printed hoods, and the figure in all dark blue would look weird.
GoldenNinja3000 Posted January 15, 2020 Posted January 15, 2020 Taskmaster needs more orange and white on him. I wish they could figure out how to print hoods or dual mold them.
Mandalorianknight Posted January 15, 2020 Posted January 15, 2020 Black widow looks pretty good. So does taskmaster, as far as I can tell. The image is pretty blurry, but the torso and mask print seem fine. As @THELEGOBATMAN said, the black hood is probably the best option since we can't get hood printing, and no leg print is to be expected.
hvader Posted January 15, 2020 Posted January 15, 2020 Black Widow is awesome, still not a fan of her face print though. Taskmaster could have used so much more printing, but he looks fine. I’m curious about the face print because on this picture it looks like they just printed the lower jaw of his skull mask onto a plain black /dark blue head...
BrickBob Studpants Posted January 15, 2020 Posted January 15, 2020 (edited) The picture quality of these leaks never fails to amuse me... Smartphones are becoming ubiquitous to the point of oversaturation and here we are with pictures still having the same quality as your run-of-the-mill bigfoot photo taken with a potato Edited January 15, 2020 by Lego-Freak
SpiderJazz Posted January 15, 2020 Posted January 15, 2020 19 minutes ago, HarryVader said: Black Widow is awesome, still not a fan of her face print though. Taskmaster could have used so much more printing, but he looks fine. I’m curious about the face print because on this picture it looks like they just printed the lower jaw of his skull mask onto a plain black /dark blue head... Based on the photo that I have yes, he doesn't have the mouth line I dunno if you can imagine, it's just the jaws on the side and lower jaw. It makes him more like a mechanical looking.
hvader Posted January 15, 2020 Posted January 15, 2020 13 minutes ago, SpiderJazz said: Based on the photo that I have yes, he doesn't have the mouth line I dunno if you can imagine, it's just the jaws on the side and lower jaw. It makes him more like a mechanical looking. It also looks like they didn’t print his goggles
SpiderJazz Posted January 15, 2020 Posted January 15, 2020 13 minutes ago, HarryVader said: It also looks like they didn’t print his goggles It's there and it has some basic shadowing effect just like how they do lego city minifigures with shades/sunglasses
hvader Posted January 15, 2020 Posted January 15, 2020 Just now, SpiderJazz said: It's there and it has some basic shadowing effect just like how they do lego city minifigures with shades/sunglasses That’s good to know. I was really getting scared for a sec...
benderisgreat Posted January 15, 2020 Posted January 15, 2020 BW looks good, but why Lego refuse to use more accurate hairpiece and make it in dark red? They certainly made hairpieces in this color before. And they can always reuse it for city minifigs if reusability is a factor. Taskmaster is ok, definitely could use Jurassic world Acu trooper legs for him.
Legocity2713 Posted January 15, 2020 Posted January 15, 2020 (edited) 8 hours ago, Lego-Freak said: The picture quality of these leaks never fails to amuse me... Smartphones are becoming ubiquitous to the point of oversaturation and here we are with pictures still having the same quality as your run-of-the-mill bigfoot photo taken with a potato I know right The CCTV footage from the factory the figures were stolen from is probably clearer. Widow looks pretty good. Liking the yellow belt a lot. I’m going to give her black hands, comic MJ’s hair, and the new batons from the Endgame set. If anyone has the First Order General polybag from 2016, you might be able to give Widow his left arm to mimic the Widow’s Bite on one side. Edited January 15, 2020 by Legocity2713
CF Mitch Posted January 15, 2020 Posted January 15, 2020 Black Widow looks good, too bad she doesn't have the white suit, though. Yelena will have it, but that's with a green vest, so.. Anyhoo, can't say much about Taskmaster yet. His face is concealed by the hood (so, technically; job well done ) but the lower half looks interesting so far. Torso and legs look kinda... bright? Not at all fitting with the black hood anyway. Well, here's hoping their accessories are good Regards, Mitch
Classic_Spaceman Posted January 15, 2020 Posted January 15, 2020 11 hours ago, Lego-Freak said: Pictures of the leaked BW and Taskmaster minifigs can now be found in the usual place Nat looks excellent, despite the overused/inaccurate hair, and it appears that she has new printed legs (rather than the reused CW-Hawkeye/IW-Nat ones). Tasky, conversely, looks terrible (at least, from this image). ?
ToaDraco Posted January 16, 2020 Posted January 16, 2020 (edited) Disappointed but not surprised by the lack of leg printing on Taskmaster and the hood should be white but he looks great aside from that. Black Widow also looks really good although that hair and face really doesn't work for her, especially the way it looks in the film. Hopefully we'll get Red Guardian and the white Widow suite in another set, assuming we will be getting 2 for the movie. Edited January 16, 2020 by ToaDraco
Classic_Spaceman Posted January 16, 2020 Posted January 16, 2020 32 minutes ago, ToaDraco said: Disappointed but not surprised by the lack of leg printing on Taskmaster and the hood should be white but he looks great aside from that. Taskmaster's hood is white in the comics, but black/dark blue in the movie:
SpiderJazz Posted January 16, 2020 Posted January 16, 2020 3 hours ago, Classic_Spaceman said: Nat looks excellent, despite the overused/inaccurate hair, and it appears that she has new printed legs (rather than the reused CW-Hawkeye/IW-Nat ones). Tasky, conversely, looks terrible (at least, from this image). ? It is new print, I can assure you that.
hvader Posted January 16, 2020 Posted January 16, 2020 Is it basically confirmed that we're only getting 1 Black Widow set now?
SpiderJazz Posted January 16, 2020 Posted January 16, 2020 1 hour ago, ToaDraco said: Disappointed but not surprised by the lack of leg printing on Taskmaster and the hood should be white but he looks great aside from that. Black Widow also looks really good although that hair and face really doesn't work for her, especially the way it looks in the film. Hopefully we'll get Red Guardian and the white Widow suite in another set, assuming we will be getting 2 for the movie. The hood from the MCU contains 3 colors: white, a bit of orange and mostly dark blue. I dunno why TLG decided to give him black atleast if they can't and won't do dual colored give him the most dominant color which is dark blue and the piece already exist. Just now, HarryVader said: Is it basically confirmed that we're only getting 1 Black Widow set now? From what I know, yes.
lego_guyon02 Posted January 16, 2020 Posted January 16, 2020 5 hours ago, SpiderJazz said: From what I know, yes. That really is too bad, we'll be missing out on some cool characters. What makes it even worse is this wouldn't be the first time so we know if we're not getting them now we're most likely not getting them at all. At this point I'd like a CMF series just to fill in some of the (many) gaps, too bad that'll never happen
Recommended Posts