Jim Posted March 28, 2020 Posted March 28, 2020 DON'T FORGET TO INCLUDE A PICTURE OF THE CHASSIS BEFORE THE BODYWORK HAS BEEN ADDED.A BOTTOM CHASSIS PICTURE DOES NOT COUNT AS CHASSIS PICTURE!! TECHNIC SMALL CAR CONTEST - ENTRY TOPIC CONTEST INFORMATION More information about the contest can be found in the general discussion topic. WHAT DO I NEED TO ENTER? Please take a careful look at the rules before posting in this topic. Each participant is obliged to create a post in this entry topic. Posts need to follow the rules stated below. Posts not following the rules will be disqualified so please read them carefully. ENTRY POST The entry post in this topic needs to contain: Entry name One or more images (max 4). You can have combined pictures (4 in 1) as long as the picture isn't bigger than 1024x1024. At least one image of the chassis, so take a pic where we can see the chassis before you close the bodywork. Embedded video is not mandatory this time Link to your discussion topic IMPORTANT This topic should be used for entries only, so commenting is prohibited. Please use the general discussion topic for...well, general discussion on the contest, and individual discussion topics to comment on the individual entries.
osterum Posted April 8, 2020 Posted April 8, 2020 1. H&C F6 The model was based on a fictional car that my friend built (check the WIP topic) There is a HOG and a working steering wheel in the cabin, rotating with the wheels. The HOG can be easily removed. The doors, hood at the back and trunk at the front open (there is nothing in trunk, a lot of space is taken up by the steering system). Moves the spoiler, under the hood of a mini oppositional engine with 6 pistons. The interior has been worked out. There are cavities on the bottom for attaching the model to the 42098 car carrier. Length - 35 studs, height - 11 studs, width - 15 studs (without mirrors). Distance between wheels - 19 studs. Video: WIP and discussion topic: https://www.eurobricks.com/forum/index.php?/forums/topic/176644-tc18-hc-f6-in-technic/&tab=comments#comment-3221259
Jurss Posted April 11, 2020 Posted April 11, 2020 2. Look ma, no beams! Model doesn't use any beam (1L is not counted). Everything is built mainly with axles and connectors. It is not based on any real car. Car features: Steering with steering wheel and HOG steering Openable doors Adjustable rear view mirrors 2 cylinder fake engine, which is connected to rear wheels trough differential Adjustable front seats Chassis before closing bodywork ... More pictures and everything else in topic
juGSI16V Posted April 17, 2020 Posted April 17, 2020 3. Formula 1 405 parts L40xW15xH11 flat 6 factice motor steering by hog Link to the topic :
AMX Posted April 18, 2020 Posted April 18, 2020 4. DARK BULLET from the future introducing you the DARK BULLET ! this car is a fictional all-roader and not based on any real car functions: rear wheel drive with a differential Working vr6 fake engine hog steering full independent suspension with a swing arm for each wheel ride hight control opening (engine/ride hight control system ) cover L:28 W:15 H:14(max)-11.5(min)
apachaihapachai Posted April 20, 2020 Posted April 20, 2020 5. Ferrari F355 If you got a bunch of red parts, you obviously need to build your favorite Ferrari. Features: Steering with the steering wheel and removable HOG; Openable doors; RWD with V8 fake engine; Popup headlights.
Zerobricks Posted April 20, 2020 Posted April 20, 2020 (edited) 6. Miniature Muscle car A blast from the past with the following functions and features: Independent double wishbone suspension in the front Driven solid rear axle Working steering wheel Fake V8 engine 4 speed gearbox Openable doors and hood Foldable roof Detailed engine bay Edited April 27, 2020 by Zerobricks
Stas_a45 Posted April 24, 2020 Posted April 24, 2020 7. Mercedes E190 Mercedes E190 (w201) with M102 engine Video: Topic: Chassis is very simple because I started to build from bodywork
damjan97PL Posted April 24, 2020 Posted April 24, 2020 8. G-Class Every one know what car it is. Dimensions: -Lenght: 37 studs -Height: 17 studs -Width: 15 studs Functions: -4x4 drive -Working 6 cylinders engine -Openable hood and doors -Steered front wheels with working steering wheel -Full suspension And photo of chassis: Forum topic:
Leviathan Posted April 26, 2020 Posted April 26, 2020 9. Lamborghini Gallardo LP550-2 "Valentino Balboni" edition. Quick turn about features : Rear HOG Fake realistic V10 engine Openable doors and trunk Steering radius about 30cm Please, watch pictures in HD : https://www.flickr.com/photos/147164115@N07/albums/72157713841846828
InKon Posted April 27, 2020 Posted April 27, 2020 10. Targa Turbo V6 It`s united image of old roadsters with suicide doors and angle form. The model has working steering system with working wheel in saloon and Hog, working engine V6, opening doors, trunk, hood and has hard parts of roof for rain ( quick removal ). Dimensions: - Length: 32 studs, -Height: 12 studs without Hog, -Width: 15 studs without mirrors. 692 parts. 1 image 2 image 3 image 4 image
ukbajadave Posted April 28, 2020 Posted April 28, 2020 11. British Classic Functions include front and rear independent suspension, steering, tilting seats, opening doors and bonnet. Details include engine and interior. Link to discussion topic.
_artemshulgin_ Posted April 30, 2020 Posted April 30, 2020 12. 1997 Mazda RX-7 [Fast and the Furious: Tokyo Drift] engine v4 steering system IMG_7193 by artemshulgin114, on Flickr IMG_7211 by artemshulgin114, on Flickr IMG_7213 by artemshulgin114, on Flickr IMG_7223 by artemshulgin114, on Flickr [TC18] 1997 Mazda RX-7 [Fast and the Furious: Tokyo Drift]
msk6003 Posted April 30, 2020 Posted April 30, 2020 13. Delorean Time Machine Car in this small size is very limited to add function. So I focused to add unique function in my car. After much tought, I select delorean. Function Rear wheel drive with differential and 2 cylinder engine Steering front wheel with steering wheel and HOG Fold down all 4 wheel at once with Mr.fusion spring fixed gull wing door I add two chassis image. one in normal mode, one in flying mode. https://www.eurobricks.com/forum/index.php?/forums/topic/176654-tc18-delorean/
NoEXIST Posted April 30, 2020 Posted April 30, 2020 14. Mix of Porsche Model containing features of different Porsche models Car features: - steering system with HOG + positive castor - openable doors and trunk - fake 6 cylinder flat engine, connected with differential
Lio2142 Posted May 1, 2020 Posted May 1, 2020 15. Retro Roadster I love old classic cars and decided to make a model in this style. My model was inspired by old Porsche and Jaguars. Features: Steering with the steering wheel; Openable doors; Openable hood and trunk; Folding roof; Detailed interior and engine layout.
filsawgood Posted May 3, 2020 Posted May 3, 2020 16. AMC Pacer Super Dragster Model of American compact car manufactured in the USA from 1975 to 1979, built in the style of a racing car for drag racing. A quarter mile racing left its mark on the refinement of the stock car - there is a huge V8 with a compressor, a safety cage, larger rear tires, a nitrous cylinder, a fire extinguisher, a trolley to prevent a coup at startup (wheelie bar) and even a brake parachute . Functional - V8 - Belt drive to the compressor, generator and water pump from the main shaft - Rear drive - Steering via HOG (stylized by a folded parachute)
Seasider Posted May 3, 2020 Posted May 3, 2020 17. Monochrome Roadster A modern classic roadster, styled to be a mix of old and new. Front engined, rear wheel drive with a long bonnet and a short rear overhang. Features: Straight Six Direct linkage steering Suspension in rear axle Interior with Centre console Roll hoops for safety protection Specs: Length - 34 studs Width - 15 studs Height - 11 studs (Main body 6 studs) Parts - 611 Photos: Video: WIP Thread:
Tomik Posted May 3, 2020 Posted May 3, 2020 18. Pullback Racer 42106 I built this race car only out of parts available in LEGO Technic set 42106 so it is alternative model or C-model of this set. Building instructions are available at buildinst.cz Dimensions: lenght: 34 studs (41 with flames from exhausts) width: 15 studs height: 12 studs Functions: two modes - pullback and steering pullback motor (can be disabled for steering mode) front axle steering (can be blocked for pullback mode) easily removeable body opening hood Discussion topic:
1gor Posted May 3, 2020 Posted May 3, 2020 19. Big Block Hotrod This is my first attempt o make Hotrod in 1:15 scale, and it fits max 15 studs width... Features: Big V8 working fake engine Front wheel steering (HOG with black gear at the rear) Front live axle Rear live axle Rear wheel drive Suicide doors
Didumos69 Posted May 4, 2020 Posted May 4, 2020 20. Dune Buggy 2020 One of my first sets was the 8845 Dune Buggy. Since then I've always been intrigued by serious suspension travel. So for this contest I focussed on suspension and built the model I would have wanted if I would still have been a kid. WIP-topic can be found here. Instructions are available on Rebrickable. More photos here. Features: HoG steering Rear wheel drive with differential Fake V8 engine 2 studs ground clearance 2 studs suspension travel all around Double wishbone front suspension Trailing arm rear suspension
kodlovag Posted May 4, 2020 Posted May 4, 2020 21. Red Sky Functions: Steering Front and rear suspensions Mini V8 engine Rear wheel drive with differential Detailed interior Discussion topic:
Rudivdk Posted May 4, 2020 Posted May 4, 2020 22. Dart Functions: Front double wishbone independent pushrod suspension Rear double wishbone independent suspension Steering via HoG Rear wheel drive through differential 2-speed gearbox V8 mini engine 2 easily interchangeable roof styles: convertible & hardtop
CharlieBravo Posted May 5, 2020 Posted May 5, 2020 23. Bugatti Chiron Inspired by the colours of 42098 Functions: HoG Steering all-wheel drive W16 fake engine Link to WIP Topic
HorcikDesigns Posted May 6, 2020 Posted May 6, 2020 24. TATRA T87 - "Streamline" Functions: - Steering via knob on the back - opening engine cover - rear swingarm suspension Outer dimensions: L×W×H = 38×15×14 [studs] Entry post:
Recommended Posts