0rig0 Posted January 28, 2021 Posted January 28, 2021 15 hours ago, Mattallica said: looks good Thank you! I will be posting an updated design soon on Rebrickable with instructions and a parts list, just waiting for approval! Quote
0rig0 Posted January 29, 2021 Posted January 29, 2021 For everyone interested in a parts list and instructions for my MOD, here they are: https://rebrickable.com/mocs/MOC-64158/0rig0/razor-crest-75292-modifications/#details I also updated my Imgur gallery with an updated engine mod: https://imgur.com/gallery/8ohZWFu Quote
mcphatty Posted February 6, 2021 Posted February 6, 2021 Here’s some photos of my Razor Crest modifications, Instructions are up on Rebrickable. I’m in the process of strengthening and simplifying some of the mod, a couple of the pieces I used turned out to be rare-ish, oops! The mod features new engine intakes, engine exhausts, folding landing gear, a new nose and a lot of gap filling. All of it is easy to add to the finished Crest, I do my best to avoid a lot of rebuilding. Quote
Beskar Bricks Posted February 28, 2021 Posted February 28, 2021 (edited) I made a three seat cockpit I. Am working on the interior and the engines now, what do you think of this mod? Note that I did not design this mod I copied it off reddit. Edited March 1, 2021 by Beskar Bricks Quote
jasoriab Posted March 4, 2021 Posted March 4, 2021 On 11/18/2020 at 9:02 PM, Jeffersc said: Hi @Jeffersc Could you put some photos of the lower part of the engines? I am very interested in seeing how you have done the lower zone (at 6 o'clock) to try to do something similar. Thanks a lot!! Quote
Kim-Kwang-Seok Posted March 4, 2021 Posted March 4, 2021 On 2/28/2021 at 12:59 PM, Beskar Bricks said: I made a three seat cockpit I. Am working on the interior and the engines now, what do you think of this mod? Note that I did not design this mod I copied it off reddit. Interesting, I almost did the same. Due to looks from outside and stability, I put the main chair back to its original position but the seats in the back have the same positioning. Quote
Wnderjif Posted March 31, 2021 Posted March 31, 2021 Greetings. After acquiring the Razor Crest Lego set last fall I compiled a collection of modifications made by other owners. One being this thread and how fantastic the work put in by others has been to inspire me to make changes to my own set. I'm posting here to share what I have done differently to further support and inspire others who may come after, also seeking advice and suggestions on what to do to make it more personal. One very useful asset for me has been the Haslab website page for their very expensive Razor Crest model. It has many amazing close-up shots of various parts of the ship that are too difficult to make out during a viewing of the show. https://hasbropulse.com/collections/haslab/products/star-wars-the-vintage-collection-razor-crest Some of the "neato" additions I have made to look for. -Folding tailgate -Rear Engine -Forward Guns -Carbonite Freezing Chamber built into the ship with easy minifig access -The triangular shaped section on the wing. -Detailed sections fore and aft of the escape pod. -False Escape Pod built into top of ship. - Viewer beware, I didn't have many of the parts to make the changes, and as such some pieces are in the wrong color. I do not have some of the parts I plan to use, such as the 3x3 rounded bricks form Poe's X-Wing for the front of the engines. Even further, some pieces don't exist such as the technic brick 1x1 with axle hole in dark gray. I don't even have the parts to build the landing gear. Use your imagination a little and you'll get it. If you want to see more detailed images or a breakdown of any parts of the build, I can certainly accommodate you for that. First gallery of images is a broad overview of the ship and things I've done.https://imgur.com/gallery/O4QAJVM This second gallery is full of detail images on the gun design and more images on the folding tailgate.https://imgur.com/a/icnLrlJ Quote
LegendaryArticuno Posted July 25, 2021 Posted July 25, 2021 (edited) On 9/28/2020 at 6:58 AM, MAG85 said: TRC_9, on Flickr @Hold0511 I tried to implement the light brick in the narrow down nose. It is not possible because the two brick 1X3X2 W / Ins And Outs.Bow (92903) are in the way. Really liked what you did with the back engines, looks really clean! Edit: I know this is an older topic, but does anyone know how you can connect the curved round pieces like that onto antistuds? Edited July 26, 2021 by LegendaryArticuno Quote
A Great Builder Posted July 26, 2021 Posted July 26, 2021 I hope this is not off topic; but if you are interested I Created a Slave-1 B-model out of this set. I hope you like it. Instructions at Rebricable: https://rebrickable.com/mocs/MOC-69329/A_Great_Builder/slave-1-75292-b-model/#details Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.